Alec Steele Co. Reviews

Alec Steele Co. Reviews

undefined review of PROCESS TSHIRT image 1 out of 1
Graham C.
Well pleased with my new T shirt . Had quite a few good comments. Great programme, fantastic blade details. If your stumped for an idea, how about my diving knife. Cheers. Clarkie.
PROCESS TSHIRT
undefined review of Bronze Hammer Keychain image 1 out of 1
Nancy B.
It’s great. It’s a square circle rounding hammer that fits on a key ring. I am really excited for the full size ones to be back in stock. I think they will be more useful for hammering.
Bronze Hammer Keychain
undefined review of The Steele Anvil (140 LB) image 1 out of 1
Jack P.
For my first couple of years in my smithy, I used a 75# Trenton anvil and it was a good starter anvil. However, I had no idea what a difference doubling the weight of an anvil had on moving steel. It literally "pushes back" on the steel more consistently. The way the anvil is dressed is perfect, too, and saved me a lot of effort. I just had to cut and level a stump and then mate the two. (I'm cheating for now by just using wood screws threw the board it came mounted to into the stump.) Further,...
The Steele Anvil (140 LB)
undefined review of Steele's 01 G1 image 1 out of 1
Andrew G.
Very well done for gen 1!!! I'm not one to post a review 2 minutes after receiving a product. But Alex Steel Co. Nearly nailed this one! A few things that I would like to see in the next gen version would be a few more colors (blue denim, brown, and maybe olive), move or narrow the two belt loops closest to the fly because it makes it difficult when using a stiffer belt (load bearing/gun) to thread the loop. I also love the extra fabric designed into the crotch and legs does allow for extra ...
Steele’s 01 G1
undefined review of Flying Anvil Hoodie image 1 out of 1
Gail R.
This made a 12 year old budding blacksmith/welder VERY happy this Christmas! He put it on immediately and his parents said he'd probably never take it off. LOL Thank you for a great product!
Flying Anvil Hoodie
undefined review of 3M Cubitron 984F II Ceramic Belt image 1 out of 1
Kody H.
As soon as I pulled these belts out of the box, I could tell their quality was far superior to the belts I had previously used. They removed material quickly and lasted twice as long. I will definitely be making another order in the future.
3M Cubitron 984F II Ceramic Belt
undefined review of Bronze Hammer Keychain image 1 out of 1
Christopher B.
I’ve been a fan of Alec Steele for awhile so wanting to show support I bought this key chain and when I received it in the mail I was glad I got it because I love it. It’s a lot stronger than I thought it would be so I don’t have to worry about it breaking in my pocket so if you are thinking about getting this keychain I highly recommend it.
Bronze Hammer Keychain
undefined review of Darn Safe T-Shirt image 1 out of 1
Alan P.
Loved the design of the T-shirt and bought one when they first came out. Went to buy one recently and the postage cost were absolutely ridiculous, but now sense has prevailed and so I’ve bought two more. Did forging as part of my apprenticeship many many years ago and haven’t beaten steel since and regretted it. Keep up the good work.
Darn Safe T-Shirt
undefined review of The Steele Anvil (140 LB) image 1 out of 1
Ace P.
Definitely a quality/well made Anvil - well packed & appreciate that it came with a carrying strap. Photo includes 100,000,000 year old Red Dinosaur Bone & a piece of raw Japanese Tamahagnae Steel.
The Steele Anvil (140 LB)
undefined review of The Steele Anvil (140 LB) image 1 out of 1
James D L.
I am doing my happy dance about this anvil.!! It was well worth the wait. UPS dropped it off at my front door, and I hauled the box to my shop and opened the package. The packaging was impressive to say the least. Styrofoam blocks protected the goods from outside forces from all directions and the machined surfaces were protected with paper products. A web strap was included to help move the box around and lift the anvil out of the box. Packaging was very well thought out. The anvil was i...
The Steele Anvil (140 LB)
undefined review of Gibson 72 Deluxe Package image 1 out of 1
Philip G.
I purchased the Gibson 72 Deluxe package and found the process very easy. Delivery was timely and without incident. I had a question regarding the footprint of the grinder and it was answered quickly via e-mail. The grinder is well built, solid, tight tolerances and is easy to work with. The only complaint, no manual or documentation comes with the unit. The grinder is pretty much already assembled and adding the accessories is pretty intuitive but a manual listing parts and pieces would be hand...
Gibson 72 Deluxe Package
undefined review of File Guide image 1 out of 1
Ed C.
The file guide is just what I needed. Years ago when I started bladesmithing, I made my own from 1095 flat stock and a couple machine screws. And, although it was close, there was always some tweaking to do when it came to the final fit with the tang. This file guide is spot on and the ease of use with the allen screws is awesome.
File Guide
undefined review of Bronze Hammer Keychain image 1 out of 1
Ben H.
Despite being in a different country, the service and general atmosphere created by the Alec Steele Co Shop felt like going to your local shop and having a chat with old friends over a coffee or a beer. Couldn't have been easier, and they couldn't have been more helpful! Thanks guys.
Bronze Hammer Keychain
undefined review of 2x72" Steele Kit Grinder image 1 out of 1
Franklin M.
Buying this grinder has boosted my bladesmithing abilities beyond my expectations. The versatility of this machine makes transitioning between contact wheels so easy. I can’t think of a single thing I would do differently. Best $2000 I’ve ever spent!
2x72" Steele Kit Grinder
undefined review of Build-A-Knife-Box: Hunter Recurve image 1 out of 1
Robert H.
I'm looking forward to building this kit! I have to put together some tooling before I can get started, but I'm looking forward to getting this put together and sharing pictures!
Build-A-Knife-Box: Hunter Recurve
undefined review of Redwood Lace Burl image 1 out of 1
Dan R.
I've seen them use this wood so many times on projects and I fell in love with it so when I decided to make my first knife I just had to get some!
Redwood Lace Burl
undefined review of The Square Circle Rounding Hammer image 1 out of 1
Brady P.
This is a wonderful addition to any shop. It arrived on time and their costumer service was excellent. It arrived with a wonderful pine smell and it has a wonderful feel.
The Square Circle Rounding Hammer
undefined review of File Guide image 1 out of 1
Oscar H.
This file guide is just the ticket. I love the carbide faces, they are super resilient. I used them with my belt grinder and so far they haven't been marred at all. Well made, I love that the slide pins can be used for parallel blades or removed for non parallel objects. Well done!
File Guide
undefined review of 3M Cubitron 984F II Ceramic Belt image 1 out of 1
Greg N.
Been making knives for a few years and within the last year started using these 3M Cubitron belts for my 2x72. These are just amazing. These last much longer than many other brands I have tried. I have found that the 80 grit is a good middle of the road grit when grinding in bevels, especially on smaller knives. 36 grit would be more for some of the large choppers I make. I can't say enough about these belts. They are top of the line when you are serious about knife making. Get some now. ...
3M Cubitron 984F II Ceramic Belt
undefined review of Steele's 01 G1 image 1 out of 1
Michael G.
Duluth Trading Co. Firehose cargos were what I wore for years, but they started skimping on the material. The pocket layout was incredibly important, my everyday carry requires that each cargo pocket has two smaller pockets inside. There weren't any other pants I could find that were built out of a highly durable fabric and had the pockets I required. A friend tipped me off on these pants. First impressions: The fabric is thick and heavy. That's what I'm looking for, there are plenty of "light...
Steele’s 01 G1
undefined review of Steele's 01 G1 image 1 out of 1
Ryan B.
The Steele pants have been my shop pants for a year and they are great! I just ordered the espresso pants, but the size I ordered didn't fit as expected. The Steele Co. shop responded the next day with a return label to make sure I got the right fit! The pants are durable for shop use, the belt loops are extra wide and hold up great. The pockets are great for tools, and snap nicely. The pants are well worth the cost, the customer service is great, and I would recommend getting these pants to...
Steele’s 01 G1
undefined review of Steele's 01 G1 image 1 out of 1
Jack T.
My favourite work trousers. Definitely made to last, bagger than I'm used to I would have liked them to be 20% thinner legged but it's a thick material so this means they don't hinder movement or bending down. Definitely worth the money and I like the look.
Steele’s 01 G1
undefined review of Flat Bit Tongs image 1 out of 1
Jason M.
These are a huge improvement over the hand me down tongs I was using before. Just an FYI, they swing as right hand tongs, perfect for left hand dominant smiths.
Flat Bit Tongs
undefined review of 2x72" Steele Kit Grinder image 1 out of 1
Bryan T.
This grinder is everything I had hoped for. An extremely good value for satisfying all needs for knife making. Thank you Alec and team for supplying great products like this.
2x72" Steele Kit Grinder
undefined review of Steele's 01 G1 image 1 out of 1
Ryan D.
These pants are comfy, durable and look professional. The support team was awesome in helping me exchange the pair I ordered for a better fitting one and they did it very quickly.
Steele’s 01 G1
undefined review of Steele's 01 G1 image 1 out of 1
Daan L.
Love the pants, you need to wash it first. And the pants need a couple of days on you to fit well. At first they are a bit stiff and tight but upon wearing they get more souple and the fitment is great. Deeeeeeep pockets for all you pencils and tape measures
Steele’s 01 G1
undefined review of Build-A-Knife-Box: Paring Knife image 1 out of 1
Curt K.
It was a fun kit to build. It took me just a few days to complete. Sounds long but did this at work dying breaks. Gave to my wife as a gift and she loves it. It get used every day in the kitchen.
Build-A-Knife-Box: Paring Knife
undefined review of Favorite Things Long Sleeve T-Shirt image 1 out of 1
Megan M.
My husband LOVES Alec Steele! I surprised him with a few items at Christmas and he is beyond pleased. Even our dog was ready to snuggle up against the shirt!
Favorite Things Long Sleeve T-Shirt
undefined review of Build-A-Knife-Box: Paring Knife image 1 out of 1
Aaron G.
This pairing knife was a lot of fun to build. I recommend this to anyone who is one the fence about knife making. Made with a cheap 1x30 belt grinder and sandpaper on small 2x4 scraps for a sandpaper block. Excited for the next buildaknifebox! Maybe a chefs knife?
Build-A-Knife-Box: Paring Knife
undefined review of The Steele Anvil (140 LB) image 1 out of 1
Jorge Y.
I want to express my sincere gratitude for your effort in in getting me this anvil. I have been looking for an anvil for a few years and about a year ago I decided to go with a brand spanking new one and I felt that yours was the best. I based that decision on your passion for what you do. I've been watching you since you were in England and I admire your passion, enthusiasm and dedication to your craft. So anyway, I kept checking and checking and I got an email.... The Anvil would be ava...
The Steele Anvil (140 LB)
undefined review of The Steele Anvil (140 LB) image 1 out of 1
John B.
the anvil is great and am glad I was able to purchase it. The casting and smoothing of the horn and striking surface is first class. I mounted the anvil on 2.5" x 3/16" wall thickness square tubing both for the base and the legs. I welded 4 pieces together for the base, closed both ends and fitted one end with 4 bolts to be able to add sand, the legs were filled with sand and after bolting the anvil onto the base, I filled the base with sand as well. There is no ring on the striking surface ...
The Steele Anvil (140 LB)
undefined review of 2x72" Steele Kit Grinder image 1 out of 1
Cody N.
The Steele 2x72 is a fantastic grinder! The motor has more than enough power to get through whatever you need and the VFD allows for all the adjustment you could want. It was well worth the wait and you cant beat the price for what you get. Set up wasn't too difficult, the assembly video is more helpful than the .pdf instructions. Its a 220v motor so make sure so don't have only 110 in your shop.
2x72" Steele Kit Grinder
undefined review of 2x48" Steele Grinder image 1 out of 1
Isaac T.
I work with kydex and this grinder is amazing! It has a nice flat platen to help get everything perfect on sheaths, holsters and whatever else im making. My 1x30 died and I didn’t want to cheap out again, but im also limited on space. This is the perfect size. Definitely recommend this 100%
2x48" Steele Grinder
undefined review of IT'S NOT STUPID IF IT WORKS TSHIRT image 1 out of 1
Paul B.
While I'm not even close to being a Blacksmith, I've been following Alec for years and love the sentiment. In IT things often are not documented and in a crisis you have to try things that seem stupid, like slamming the sweet spot on an old MAC to make a sticking hard drive spin. (It worked and we where able to get the data off.) As long as it's not dangerous it's never stupid if it works!
IT’S NOT STUPID IF IT WORKS TSHIRT
undefined review of Bench Tilting Stand image 1 out of 1
John C.
This is a great addition to my 2x48 grinder. Thanks to Zac for helping me resolve the issues with my grinder, it wasn’t a problem with the grinder it was a weak GFCI breaker.
Bench Tilting Stand
undefined review of Steele's 01 G1 image 1 out of 1
James L.
Here's a pair of rip Snortin trousers that are going to see you through a couple of failed marriages, two wars and runnaway tigg rig. Secret pockets for this that and the other an she'll never find a thing. The sizing, the rise the whole contraptions' Buckaroo ready. Can't wait for the Palomino version!
Steele’s 01 G1
undefined review of 1080 High Carbon Steel (Damascus Stock) image 1 out of 1
William J.
The precut lengths of 1080 save me a lot of prep time. I don’t have to focus on cutting materials I can just start forging or grinding on my project.
1080 High Carbon Steel (Damascus Stock)
undefined review of Steele's 01 G1 image 1 out of 1
Chancey W.
Very happy with the size after washing and the post break in comfort. Material seems sturdy enough, seams feel strong, belt loops are rugged. Deep pockets are good strong feature, cargo pockets are best I've had (typically not a fan). Would make them my go to work pant if future models had double front/knee pad insert pockets.
Steele’s 01 G1
undefined review of Steele's 01 G1 image 1 out of 1
James G.
They fit well, but need to ride a bit high for the best fit. Hope you get a big laugh out of this photo. Seriously, very nice work trousers, well made and looks to be super tough.
Steele’s 01 G1
undefined review of Steele's 01 G1 image 1 out of 1
Keaton M.
The pants fit and feel amazing. I got the 30 x 34s and when I wear my boots they fit amazingly! Without my boots they drag a little bit but that’s just because I’m a 33 and those aren’t made. The material is tough and can withstand years of wear and tear. 11/10 highly recommended. Better than my carhartt pants by far.
Steele’s 01 G1
Alec Steele Co. ReviewsMore details