Alec Steele Co. Reviews

undefined review of Steele's 01 G1 image 1 out of 1

Michael S.

Truly forged in fabric. Very heavy duty material and hardware. Even the pockets are made of the same heavy exterior fabric. Fast shipping and cats will love the box it ships in.

Steele’s 01 G1

Ronald B.

These pants are simple AMAZING!!!!! They are heavy and will keep you warm when it's cold (Day to day wearing). I am NOT a metalsmith by any means. I fell down 5 stairs and ripped my knee open.... the jeans were unharmed. Alec has been testing theses for a few year and they came out FANTASTIC!!!!! I will be purchasing more!!!!

Steele’s 01 G1

undefined review of The Steele Anvil (140 LB) image 1 out of 1

Adrian N.

I've had a good few hours on this anvil so far, and I'm extremely pleased with its performance. Rebound is nice, the surface holds up fantastically, even the ring sounds better than my old anvil (albeit that comparison may not be saying much). It has pretty much everything I like to see in an anvil, and the only downside are the sharp corners on the heel, where I've bumped into it once or twice and got a nice rip on my pants, which was fixed in about 30 seconds with a file. I was skeptical abo...

The Steele Anvil (140 LB)

undefined review of 2x48" Steele Grinder image 1 out of 1

Christopher B.

Frick! I hate how much I love this grinder! I’m a hobbyist blacksmith/bladesmith and this grinder is literally the bees knees. Everything I could have asked for in an upgrade from my last belt grinder. The only bad thing I can say and I’m sure most would disagree is there were no instructions. I know I know it’s literally already together but when I spend this much on something the last thing I want to do is forget a step or put something on wrong and ruin the item. Besides that it’s amazing I u...

2x48" Steele Grinder

undefined review of Build-A-Knife-Box: Sheeps Foot image 1 out of 1

Landon P.

My first ever stock removal knife. it was smaller than I was expecting but I had a good time putting this together with the best of my abilities. I kinda want to get the next one!

Build-A-Knife-Box: Sheeps Foot

Shawn H.

Just as seen on the channel. Excellent proportions and rebound. Nice tone to it and it wasn't even properly secured yet. Packaging and delivery in the unboxing video I made: https://youtu.be/lKCHfng-x3Y

The Steele Anvil (140 LB)

Ryan M.

It shipped quickly and was well packaged. Can’t wait to get some forging time on it. I am a beginner blacksmith just starting to gather my equipment. It will be so nice to have an anvil with clean straight surfaces. Thanks for the stickers and shirt. I was in such a hurry to order it, I didn’t notice the shirt size box. I wear an XL and the shirt is a small, but it’s all good. My son has laid claim to the shirt. Perfect fit. Hopefully the anvil stand I ordered from you, won’t be far behind. I c...

The Steele Anvil (140 LB)

undefined review of Ceramic Honing Rod image 1 out of 1

Thomas G.

It has made sharpening easy and I think it puts a little better edge on my knife than the steel does. This knife is 15N20 that I made myself with a cocobolo handle

Ceramic Honing Rod

undefined review of 4140 3"x1"x1.5" Hatchet Blank image 1 out of 1

Brandon M.

After more than a year of watching Alec and his crew I finally took a swing at forging my own axe! The products and content on alecsteeleshop.com made accessing materials and information necessary to this project easy and fast!

4140 3"x1"x1.5" Hatchet Blank

undefined review of 1080 High Carbon Steel (Damascus Stock) image 1 out of 1

Cory H.

This steel is great especially for someone like me who’s just getting started and can only do stock removal until I get everything I need for my forge. Some other places I’ve ordered steel from have hardened ends from cutting but you don’t have to worry about anything like that with these. Plus, Alec Steele Co customer service is hands down the best. I’ll definitely be ordering more.

1080 High Carbon Steel (Damascus Stock)

Alexander C.

After receiving the wrong order, I immediately contacted the customer support service of Alec Steele Co. The same day I got a reply which stated I could keep the wrong order and that they already shipped the correct item. Great customer support!

1080 High Carbon Steel (Damascus Stock)

Jeffrey P.

Quick and easy transaction. I wanted to experiment doing a hidden tang and maybe a folder. These small bars are perfect for it. Couldn't be happier with doing business here.

1080 High Carbon Steel (Damascus Stock)

undefined review of Bronze Hammer Keychain image 1 out of 1

Cory H.

This and the ear a friend made for me are pretty much the best keychains ever created. Whenever I see it on my desk at work I always want to hurry home to get to work on some knives.

Bronze Hammer Keychain

undefined review of Darn Safe Hoodie image 1 out of 1

Heather H.

Donnie: my boyfriend, has been watching your videos for the past few years. He is the I&C Engineer at the new Gas power plant in Birdsboro, PA, and the chairman of the Safety Committee, aka, "Safety Club". He and I both come from old school folks who work hard and play hard (maybe not the safest), so it's become kind of a joke. But; he LOVES your videos, has your awesome pants, and envious of the engagement ring you've made. Now he's gotten me into Blacksmithing too! Taking classes coming up he...

Darn Safe Hoodie

Wesley H.

Just got my new anvil in. Got so excited to use it I didnt even wait to put it on my stand. started forging with it right away on the ground. it has a great hardness level which makes it way easier to move metal. It has a smooth surface unlike my old one that actually gives the metal a better refined look. The horn has a good shape and makes it a breeze to bend metal around. and the Hardy hole and pritchel hole both are very well finished to make using anvil accessories a nice experience. It cam...

The Steele Anvil (140 LB)

undefined review of PREMIUM "PROCESS" TSHIRT image 1 out of 1

Darian B.

Love this shirt! It is light and so soft. It is also true to color. I got the emerald green color. My camera doesn't pick it up well but the color is perfect. Definitely buying more!

PREMIUM "PROCESS" TSHIRT

Wood, R.

Wow! It’s beautiful! Even more impressive was the customer service! The shipment happened while I was moving across the country and the shipment was going to my old address. The Steele team rerouted the shipment on the fly and I got at my new address. I’m sure I’m going to enjoy it for years to come!

The Steele Anvil (140 LB)

undefined review of Flat Bit Tongs image 1 out of 1

Camron S.

Theyre the first tongs ive ever baught before, and they work fantastically! Im a beginner blacksmith, and the flatbit tongs have unlocked so many new possibilities for me and what i make. To anyone whose just starting off, Alec Steele youtube and theyre store has been the most helpful tool in my arsenal.

Flat Bit Tongs

undefined review of 3M Trizact Finishing Belt image 1 out of 1

James R.

I was very surprised! After hearing about it, I had to try it. So, I did, and it came out perfectly! I will definitely be buying what Alec recommends from here on out.

3M Trizact Finishing Belt

Kenneth W.

After a little mix up with my order that was very quickly corrected by the team I couldn’t be happier with my purchase and may get some more in different colours if released.

Steele’s 01 G1

Michael W.

The pants are well-made I do hope that the lack of rivets like in other heavy work pants wI’ll hold up. The pants offer plenty of room and ease of movement. The cargo pockets hold plenty of room and tools. One caveat I wish they were USA made.

Steele’s 01 G1

Jason B.

Love this hat. Quick delivery, and happy with the product. Excellent quality and comfortable. If you like hats with a shorter crown size, this is a good one. I have a small head so this hat was perfect for me. I'll definitely buy more products.

Touchmark Dad hat

undefined review of Ironwood Block 1" x 1 3/4" x 5" image 1 out of 1

Jonathon C.

I ordered two of these and they are both beautiful pieces! They came with a smooth finish and both true to the size in the product description. I highly recommend this product!!

Ironwood Block 1" x 1 3/4" x 5"

undefined review of 2x72" Steele Kit Grinder image 1 out of 1

Gary B.

This is a high quality grinder at an excellent price. I replaced my homemade 72” grinder and couldn’t be happier. I checked out other grinders before buying this one and the price couldn’t be beat for a complete 220v with controller. Very happy with the product and customer service when I needed and extra 3” wheel due to my own fault.

2x72" Steele Kit Grinder

Jose M.

I've had my grinder for a couple of months up and running. I mainly wanted it to make knives, and I wanted one small and that's basically plug and play. This grinder checks all those marks. I've made about 15-25 knives with it so far and not once have I had a problem with it. I haven't needed to turn it up to full speed because the motor on it is already really good that it does great at 50%! I highly recommend this grinder for anyone that's looking for a small bit powerful grinder. And all the ...

2x48" Steele Grinder

Cody D.

First belt grinder I have ever owned and I would say it is worth the price! I did some shopping around. I wanted a more robust chassis than some that are cheaper than this one. I also wanted a VFD for sure, that is the best part of the Steele grinders for sure! It's amazing how versatile it is when you have so much control on such a powerful motor! I have never NEEDED to use 100% of the motor's power, but it's got plenty of chooch to bite steel like it's the cookie monster. The video that goes o...

2x72" Steele Kit Grinder

undefined review of Easy Peasy T-Shirt image 1 out of 1

Bruce W.

These T-shirts are great. They are great quality and hold up well. The shopping experience is awesome as well.

Easy Peasy T-Shirt

Andrew P.

Packaging was well done, reinforced. Arrived and UPS was able to offload very easily. Packaging was easily removable with a box cutter, and the included lifting strap made maneuvering incredibly easy. Out of the box, the machine work was impeccable, not a blemish on any striking surface. Needs a coat of oil out of the box, but other than that, 100% as expected and I cannot WAIT to start my craft out on this amazing tool. Thank you Alec and team. I hope I can make this anvil proud.

The Steele Anvil (140 LB)

undefined review of File Guide image 1 out of 1

Gerald B.

Everything it said it would be in more. I did a lot of research and this is the one I chose high quality easy to use. Love it.

File Guide

Chris Y.

I could not be happier. The Steele 2X48 with it's small footprint meets all my needs. From its simplicity, thanks to the Alec Steele Co pre-wiring and packaging, to the ease of installation in my home garage/workshop with only 115 electrical. The Grinder has plenty of power and options with it's numerous accessories. The Horizontal tilt feature is a must have!

2x48" Steele Grinder

David S.

The 2x72 grinder was an upgrade for me. It is so much more flexible having the variable speed controller and the ability to change the primary attachment from platen to slack belt by just rotating it. When I initially purchased it, I added the 5 inch wheel and the Surface Grinder attachment. Here I am almost a year later and I have added the small wheels and the 8 inch wheel to my collection of accessories. The grinder has grown with me as my experience has increased and allowed me to ha...

2x72" Steele Kit Grinder

Brad W.

After 3 years of a 4x36 from Harbor Freight, I started researching 2x72's. I've watched Alec Steele's videos for several years and when I saw he was going to be selling a 2x72, I knew that was the one I wanted. It was my Christmas present to myself. I couldn't be more happy with it. I have ground out several knives in time it would take to grind 1 on the 4x36. The 2 hp motor is a beast!! I got the small wheel attachment and have both sets of wheels for that. The adjustable tool rest is al...

2x72" Steele Kit Grinder

Nate C.

The Steele 2x48 has been a quantum leap from the 1x42 I had been getting by with previously. I opted for the tilt stand and the small wheel attachment. It opened up so many new options with the flexibility of wheel size choices, flat platen, or slack belt in vertical or horizontal. I plan to add a large wheel and the adjustable table in the future. If you are currently running a smaller grinder and wondering if it is worth it to step up, it is most definitely worth it.

2x48" Steele Grinder

Jeffrey C.

I have purchased a number of items from Alec Steele Co and the products and service have been top notch. These 7" tool blanks of 4140 are just right for the tools I need to make.

4140 0.750" RD 7" HRA Hand Tool Blank

undefined review of The Square Circle Rounding Hammer image 1 out of 1

Dakota M.

This hammer is the pinnacle of square rounding hammers. Every other hammer like this is a knock off unless it comes from Alec Steele!!!

The Square Circle Rounding Hammer

Kory C.

Made my second blade with this beautiful hammer and boy did it perform. I highly recommend this hammer and looking forward to buying more products in the future.

The Square Circle Rounding Hammer

undefined review of FORGED STEELE T-SHIRT image 1 out of 1

Roberta R.

good quality t, super fast delivery at extremely reasonable price - i will no doubt be ordering more soon - love them 💕

FORGED STEELE T-SHIRT

Mitchell W.

First time order from Alec Steel Co! Shipping was fast and product came well packaged. Can’t wait to try out this new hobby. Grinder order coming up next!

1080 High Carbon Steel (Damascus Stock)

undefined review of Favorite Things Long Sleeve T-Shirt image 1 out of 1

David H.

Very happy with the quality and look of this shirt. I’ve recommended it to some friends and will be purchasing again from this shop. Thanks Alec!

Favorite Things Long Sleeve T-Shirt

undefined review of 2.5 Hammer (List) image 1 out of 1

Bernie L.

The 2.5 lb is my second Steele hammer, a match for the 3.5 lb. Appreciate them both, and enjoy forging with them.

2.5 Hammer (List)

Alec Steele Co. ReviewsMore details