MR2 Heaven ReviewsSee store reviews

MR2 Heaven is a great resource for an individual who is new to the MR2 community that just purchased a 1993 MR2 Turbo T Top with only 45,000 miles in amazing condition. I have purchased more than a few items already and just received my Enkei RPF1 17x7 & 17x8 Staggered Wheels in Silver to replace the original 15” Wheel because I was very limited to tire selection. All of the items I have purchased from MR2 Heaven are very good quality and benefit the vehicle. Buy with confidence because this re...

1) Removing the OEM intercooler was a decent challenge for the 3rd Gen 3SGTE. I removed the engine lift “J-Hook” and the rear strut x-brace. After mechanical persuasion of the old IC core it was able to be wiggled and eventually liberated from the engine bay. 2) The OEM shroud was held on by 3x10mm fasteners. The CAD drawings on the product page are high quality & accurate enough to work out the rest from there. 3) The kit had the correct size & tapering for each flexible connection and the c...

I recently installed this shifter in my MR2 Turbo and it made a huge difference in how the car feels. The shifts are much more direct, smooth, and precise, and the overall driving experience feels tighter and more confidence-inspiring. Especially with the spherical bushing upgrade. The build quality is solid and everything fit perfectly during installation. I filmed the whole process of installing this so others can see how it performs. You can check it out here: https://youtu.be/rtCR9Dv1sl8 H...

Very happy with this brace overall. The black powder coating looks great and the construction quality is excellent. Fitment was solid and stiffens up the front end. One note for others: the supplied bolt for the brake master cylinder reinforcement didn’t fit my setup. I have a 1991 SW21 chassis with the smaller master cylinder, and I learned this brace is designed primarily for SW20s with the larger master cylinder. I temporarily used a longer bolt to reach my smaller MC, and I plan to upgrade ...

I Have a 1986 AW11 MR2 and My Original E-brake Cables were old and Rusted so they would Hold my Brakes on even after being Released. These New E-Brake cables are Awesome the whole replacement Process was straight forward and they Work Flawlessly The only Thing to note is they're slightly shorter than the OEM cable so You may need to Replace the Stock Adjusting nut Which isn't a big deal. I would Highly recommend these to anyone looking to replace those old Stiff OEM cables and get that smooth ...

First off, the brace was priced right compared to similar braces with the additional cross-bar. As great as the stainless finish looks, I still painted it only to match the bracing I have in the frunk. Simple installation. I think it took longer to find the torque specs in the "BGB" than to install. Note: ZERO modifications needed to install this part. Once installed, the increase in rigidity is obvious. It is a sunroof car with only 63k, but would still creak when going over surface irregulari...

These were just what the MR2 needed to clean up the engine bay a little bit. They fit perfectly, with a minor exception I'll explain at the end, and look great. I used the Gates Powergrip hose clamps, or tried to! On the heater feed they worked great, but on the larger hoses I ordered the set that was 1-5/16"-1-1/2" for the 1-1/2" hoses. These did not go over the hose "barb" so I reused the Toyota constant pressure clamps. Still look good, but not as good as the Powergrip on the heater ho...

I was signed up for notification of when the lights would be available for pre-purchase. I purchased them the first day they were available and patiently waited for the parts to arrive at MR2H and be assembled. I didn't even want to consider how bad I would mess them up if I tried to put them together. Totally worth the wait and worth the price. They were well-packaged so zero damage occurred. I plan on installing them on the '93 this weekend now that my LED bulbs have all arrived. I was impres...