MR2 Heaven ReviewsSee store reviews

Perfect replacement for a 31+ year old original trim/ seal. The OE one had begun to shrink and misalign, so it was time. Fits the profile of the fiberglass arch perfectly. Prepping the surface took the longest as there was adhesive holding the old one in place. Just determine which side to start on based on the profile, and work your way around the rear arch. Don't pull too much of the release film off the back at one time to prevent sticking to something othwr than the part. The trim is generou...

The 9" High performance fan is a HUGE upgrade over the others. I'm running a custom side mount heat exchanger using a Garrett 5" thick core and did a bunch of tests. 1). Test 8" Perma-cool fan = 300CFM no core, 130 CFM MAX through the core. 2 Perma-cool fans (front/back of core) 340 CFM MAX. 2). Spal 7.5" fan =370 CFM no core with 2 fans (front/back of core) 400 CFM MAX. 3). Spal 9" HPF = 780 CFM no core. Behind the core = 300 CFM, side of core =707 CFM, through the core =660 CFM. All tests ...

These are quality seat belts and I experienced good customer service!!! I paid extra to have a pair of red seat belts arrive early allowing me to install them sooner than later. Before receiving the new pair, I had mailed out my original belts to obtain the refundable core charge. When the new seat belts arrived, I went through the included instructions and realized I was supposed to keep and reuse the white plastic rod from the original driver side belt. Unfortunately I had included that plasti...

The coilovers came super fast 3-4 business days from FL to TX. Straight forward install. You’ll need to file down the Inside of brake line bracket if you’re wanting to utilize it — I know a lot of people just cut the tab off and let the line hang loose. Standard spring rate isn’t too bouncy to where it’s annoying in my opinion, but it does have its moments. Out of the box height is about 1” gap in the front and 1.25” in the rear with 16” wheels and a 45 profile. Settings right now for daily dr...

I purchased Eibach pro kit lowering springs to help with a more aggressive look, paired with stock struts. I am currently running 17x8 +35mm Enkei rpf1's with 215/40 tire in the front and 17x9 +35mm Enkei rpf1's with a 255/40 tire in the back. The car is visibly lower by about one inch. The ride quality on rough surfaced but non-bumpy roads is noticeably better, however any large bumps in the road are more severe. With my offset and tire pairing, the tire will rub slightly on the outer fender we...