Frank S.
Not a typical “cart” Cub Cadet Cat diesel HFT 420 swap. Inquired about a longer drive belt with Vegas Carts, responded quickly with a guide to choose the right belt.
Works great!
Thanks VC
Vegas Carts & Performance Reviews
+1
47" Double Cogged Replacement Drive Belt
David H.
John Deere HPX gator 4x4 Predator 22HP Motor install. Runs alot faster (40mph) than factory 18HP Kawasaki and no more start and carb issues. Do want to try rubber engine mounts to cut down on vibration. But all in all withe the CVtech06 clutch very happy with final outcome
7-1/4" Heavy Duty Primary Drive Clutch (CVTech Series 06)
Daniel G.
The kit works great. Easy to use easy install. I chose the predator 670 engine and I’m pleased if not pleasantly surprised. After some minor tweaking and adjusting it has far more power than expected and runs great!
Predator 22hp Installation Kit for Yamaha G2/G9
Rebecca F.
I won't be able to install it until after the front suspension and frame stretch are done in the next couple of weeks... But based solely on how clean it is, I couldn't be happier with it!
625cc 23HP Big Block Engine Upgrade Kit for 1994-2008 EZGO TXT / Medalist / Workhorse
Trevor V.
Got off work late and was prepping for hurricane Idalia. Didn't get a chance to truly put my cart up had to just tarp it. Of course the tarp wasnt good enough with all the wind. I got water in my tach. Behind the lense I could see some and literally poured a little water out of it. I put it in rice for two days after the hurricane and it still works perfect. The tach gets this florida farms seal of approval.
85mm Analog Tach for Predator/212/420/670/Clone 0-8000 Tachometer
Paul M.
On time delivery, quality product. Most of the reviews I've seen are about installing the kit on lifted carts, but I will tell you with a little though on the front sub frame mount the kit fits great on a lowered cart. The front springs were flipped and 1" lowering blocks installed on the rear. There is 3/4 " clearance between the top of the engine and the bottom of the seat. Didn't care for the looks of the ignition switch wiring attached to the steering column so I pulled the switch panel fr...
625cc 23HP Big Block Engine Upgrade Kit for 1994-2008 EZGO TXT / Medalist / Workhorse
Tony I.
Ivan was very helpful in my decision to upgrade to the 625 engine upgrade.
The instructions are very clear and made the prep and installation very easy, I installed alone in about 4 hours.
I had a few minor modifications to make on the lift kit to get the clutches line up. Wiring harness was also easy to install.
When I finished and fired it up, as soon as it got fuel it fired right up.
I got it to temp adjusted the idle and off I went, the power is impressive
If you have the stock motor in ...
625cc 23HP Big Block Engine Upgrade Kit for 85-96 Yamaha G2/G9
Forrest K.
This cradle is the perfect foundation for your engine swap. I bought mine as a one-off, it came with no brackets, cross members or tabs so that I could weld in the mounts for my non-conventional engine swap into an E-Z-GO. The bends were excellent with no tubing crushed, and no wrinkles, the sides were parallel and it was just what I needed. This is a quality piece of kit. Thanks!
EZGO Cradle Tubing
Kaleb C.
The ignition kit is super simple. My kit had a wire color difference that was not noted on the install manual. I email the support group and had a response with in 10 minutes to clear up my question and I was able to complete my install. Definitely worth the buy.
Wiring Harness w/Keyswitch & Mount for HF Predator
Kaleb C.
This kit is as straight forward as you can make it. With a little mechanical know how this thing is a simple install. I definitely recommend having a second person for an extra set of holding hands. I did the install myself and had to think outside the box a little to keep it in place.
Predator 22hp Installation Kit for 1986-1996 Club Car DS
Darryl L.
Instructions were very accurate only problem I have is oil filter removal if motor was a little more forward it would have been perfect plenty of room to move forward then just a little longer belt. But overall kit was high quality stuff
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Stuart W.
Its a very high quality well thought out conversion kit and easily went together but the Predator 670 motor is a low rpm high torque design which is limited on the top end speed .Before the conversion my cart would run almost 30 mph with Robin motor and after I installed Predator conversion the speed dropped to maybe 20 mph but had incredible hill climbing and really good take offs but lacked any speed .But no worries Im presently working on installing 6 to 1 gears in rear diff to address pro...
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Nathan K.
I ordered this 86-96 Club Car V-Twin Conversion motor mount plate for my Predator 670 swap and I was glad I did! It made the swap easier by minimizing the amount of fabrication. I did have to modify the DS carriage but next time I will order the Vegas Carts complete kit. Their products are quality and so is their customer service. Shipping was quick.
86-96 Club Car V-Twin Conversion Motor Mount
John M.
This used a 670 cc 22 hp preditor,using the ignition harness kit,tac option,4'' lift kit,10'' 22 tall tires and wheels,I dyed the white seats black,with a plum purple metallic body paint.I had to fabricate the front mount to fit a g-14 1995 yamaha using a g-9 kitsince the correct kit was not avalible,everything works well and the customer in extremely happy,Maturo's Motorsports thanks you for the quality parts .
V-Twin Conversion Motor Mount for 1985 - 1996 Yamaha G2 / G9
Nathan K.
I ordered this
Club Car HD Performance Secondary Clutch for my 96 club car with the Predator 670 swap and I’m glad I did! With the 1 3/16” belt, this thing is fast and it can really climb! Thanks Vegas Carts!!
Club Car HD Performance Secondary Clutch for 1-3/16" Belt
Pete P.
Installed Vegas kit 625cc 23HP Big Block Engine Upgrade Kit in a 2002 Club Car DS including the wiring harness, great match, highly recommend not wasting time with old wiring, just remove it and use the harness for your application. Started right up, incredible sound. All parts matched up with the cart and are high quality.
Pete
Wiring Harness w/Keyswitch & Mount for 625cc Engines
Mark B.
Worked great. I ordered the improved throttle clamps(now included) to prevent the cable from slipping. I wish they came with longer U-bolts for mounting to the rear end. Only pain was having to look online for the instructions.
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Zacks M.
Im currently in process of installing the kit. My cart is getting a full restoration at the same time. I suspect we should hear it run this month. Everything is installing nicely. Thanks for a great kit Vegas Carts
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Robert E.
Bought a 10 hp diesel off eBay 1 cylinder fuel injected yanmar Cologne. Bolted right on engine plate I already bough, bolted clutch on and sent it! With a black smoke cloud behind me.
7-1/4" Heavy Duty Primary Drive Clutch (CVTech Series 06)
Matthew S.
The kit came complete. It went together smoothly, I was very impressed with the quality of parts, it is definitely a bargain. I have not fired the engine yet but, judging by the quality of the kit I don't expect there to be issues. Great stuff thanks Vegas Carts!
460cc Go Kart Racing Engine - DIY Assembly
Mark R.
My old engine was very weak climbing hills. Put this new engine in. Awsome. Works fantastic. I would highly recommend this kit and motor.
Its a fun and easy install.
Mark
625cc 23HP Big Block Engine Upgrade Kit for 1994-2008 EZGO TXT / Medalist / Workhorse
Rick S.
I put a 420cc predator motor in my golf cart . so I added the new clutch from Vegas carts and it works great plenty of torque. Works just like they said it would . I received it fast and the service was friendly. Highly recommend.
7" Low-Profile Primary Drive Clutch (780)
Luper K.
Great install easy. Only thing not sure if is the seal. After tow day washed cart tac got wet and fogged over for a few days. Works great just fogged. Was told it was normal. Now when I wash cart I cover with plastic bag
85mm Analog Tach for Predator/212/420/670/Clone 0-8000 Tachometer
Mike R.
Very Nice Piece! I bought this hoping it would fit the DuroMax 713. It is Not a direct bolt on to that engine. The left pipe's flange was slightly off after mounting the right side. I was able to chuck the left flange into a vise, heat the end of that tube, and gently twist the exhaust to properly index the flange to the exhaust port. Worked great, and still fits perfectly in the chassis!
HF Predator 670cc V-Twin Performance Header for Yamaha G2-G22 Conversion
Justin W.
I got a g9 yama that I put the 440cc duromax in this motor plate worked good for my install you will need the longer belt but I'd wait and get the motor mounted first then get the measurements to get the rite size belt thanks
Yamaha G2/G8/G9/G11/G14 GX390/GX420 Clone Conversion Motor Mount
Lester C.
Very nice kit. Everything fit. Predator Motor has plenty of power and the power band is smooth. If I can find another cart with a bad motor would definitely purchase again…
Predator 22hp Installation Kit for 1998-2014 Club Car DS
Leonard P.
Just finished my 1998 Ezgo txt 459 swap. Used the Vegas carts 420 kit. Fairly easy but did modify half of the 459 gas tank bracket and the generator mount I got from Vegas carts to mount the generator on top so I could access the oil dipstick and make oil changes easier. Used a micro switch to cut the ignition to make use of my foot pedal and keep the original Ezgo dash switch. I left the electric start on the engine but don’t use it as the starter generator has plenty of power to turn over the ...
Predator 13hp Installation Kit for 1994-2008 EZGO TXT & Medalist
Evan H.
420 swap on a 92 Yamaha G2. Clutch installed with no issues and had all hardware need for install. The clutch is fully engaged low - mid in the rpm range of my engine that still has the governor and pull like no one is riding. Would definitely buy another one.
7-1/4" Heavy Duty Primary Drive Clutch (CVTech Series 06)
Dixon W.
I thought all I needed was the engine plate, then I needed the 780 clutch, Then the header, then I needed the pulse pump isolator, then the intake billet and filter. It all came together so easy with Vegasparts installation guide for converting my Yamaha G 14 to the Preditor 420 cc Hemi powered golfcart. I was totally impressed with vegasparts, they shipped my parts right away. And the quality is great, my golfcart is perfect now, a ton of power and everything fit together perfectly....
Yamaha G2/G8/G9/G11/G14 GX390/GX420 Clone Conversion Motor Mount
Andy L.
The Unicorn...
When the body and chassis have different numbers it's an odd cart. This is a Yamaha G14 transition to the G16. I understand they are rare, hence the "Unicorn 🦄".
Vegas Carts did a fabulous job of replacing parts of the G16 670 predator motor upgrade kit I originally purchased two years ago with the necessary changes for the G14.
The whole transformation was easy and fast. Many changes have been made to this cart and it performs well. The tach and wiring kits help tremendously. ...
Predator 22hp Installation Kit for Yamaha G14 Golf Carts
Burnette G.
Gonna keep it to the point. This thing fit perfect. Didn’t have to fight it on the install at all. Definitely a time saver and if you’re impatient like me then it’s worth it. The paint/powder coating is of quality as well. Would like to see the shipping changed up some. You have to have someone sign for the package if it’s over a certain amount or they won’t deliver it. I got lucky and my daughter was home from college. If she wasn’t I wouldn’t have been able to get it.
EZGO Bare Cradle
Harry H.
I’ve bought all my parts from Vegas carts for this predator 670 swap every part fit perfect. I would have returned this header because it was dented and the coating was gone but it’s fit was perfect so no I’ll keep it . It’s not annoying loud . A lot of smiles per gallon buying the right sub frame made this a 8 hr job start to finish
670cc Predator Performance Exhaust for 1984-1996 Club Car
Kent L.
Fit like a glove and looks very nice. I bought this kit months ago and finally got around to installing. I also purchased the wiring harness for the 22 HP Predator which is a nice addition and time saver. My only issue is, I cannot find instructions for wiring harness anywhere. I installed like I thought it should go, but would like to be 100% sure before I power it up. Can you please advise on this! Thanks. Will post pics when complete.
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Nathan S.
Finally started working on cart.
I really like the ezgo gx390 clone conversion cradle and motor mount. Can't wait to start working on installing the 780r clutch and starter belt pulley.
Wishing you guys a safe Melekalikimaka and Happy New Year.
Billet V-Belt Pulley for use with 780R Clutch & Starter/Gen
James W.
Fast easy install with no issues. Everything fit perfectly and as described. I'm starting on my second Vegas Cart big block install. I look forward to building more carts in the future with parts from Vegas Cart.
Predator 22hp Installation Kit for 1998-2014 Club Car DS
Matthew S.
The wiring kit made finishing up the engine swap hassle free, only had to drill one hole in the dash to slip the wires through. The instructions online made it easy!
Wiring Harness w/Keyswitch & Mount for HF Predator
R David M.
Used the kit to upgrade my 1994 Club Car. Enjoyed the experience and staff were great to assist me through one minor glitch (on my part). I would recommend upgrading your driven clutch with the spring supplied with the kit.
Predator 22hp Installation Kit for 1986-1996 Club Car DS
Jeff M.
Ordered my kit (97 EZGO) was delivered approximately 3 weeks later. Had everything to make the installation fairly easy, did it all myself except putting motor in. Had a few additional questions that Ivan answered for me in a timely manner. Thinking about doing my ‘07 Yamaha.
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Garrett I.
Awesome product, definitely quites any motor down I have used this muffler on vtwin brigg, predator's, and 625's all work great. Shipping time is the only down fall takes a few weeks to receive.
Muffler Kit for Predator 420/460cc - EZGO TXT
Vegas Carts & Performance ReviewsMore details