Tronxy 3D Printers Official Store ReviewsSee store reviews

I purchased it for the dual color and laser engraving options and it has met my expectations.Opening the box, I found that the unit was well packaged. The 2 in 1 out hotend was already installed and included was a single filament extruder. Assembly took about 20 minutes. The gantry is sturdy and the addition of a carry handle is nice. The extruder for the second filament is straightforward. Connecting the wiring is easy. There are only three connections to make – the flat ribbon cable, the secon...

I've been using this printer for about 2 weeks, and while I haven't had a chance to test the laser engraver and dual extruder's capabilities, so far I'm happy with it. Just to give a brief overview of my experience with a 3d printer, this is my 5th time. First, the printer comes in a package that is mostly assembled except for the printer's z-axis and individual extruder components. Instructions for setting up the printer as a single extruder setup are included, but I don't really need them as i...

Review of TRONXY 3 SEUnboxing of the TronXY 3 SEI ordered it and it showed up three days later. There was slight damage on the outside of the box. Lots of foam on the inside. Everything is very nicely packed. In the box;Sample roll of white PLA 1.75-millimeter filament. Micro SD card with all of the manuals and software onMicro SD card to USB converter2 very nice spool holders made of aluminum, very sturdy, very functionalA scraper with a nice edge on itglass bedA USB cable to print directly fro...

"Out of the Box" Top. Bin sehr zufrieden. Der Aufbau ist etwas Umständlich; macht aber auch Spaß den Drucker wachsen zu sehen. Aktuell drucke ich mit einer FR4-Platte da ich nicht gerne auf Glas drucke und die Magnetplatte noch nicht geliefert wurde. Zusätzlich habe ich den Rahmen mit Winkeln verstärkt und die Displayposition geändert (Habe ich auf Thingivers eingestellt) Alles in allem würde ich den Drucker ab Fortgeschrittenen empfehlen. Er ist ein toller günstiger Drucker wenn es mal etwas...

Excellent printer for beginners. He was a beginner himself and collected it in no hurry for five hours. I did not expect, but without any settings and adjustments, almost the first time I printed a test cube and owl. It worked out great. Faces and planes are even, smooth. Small parts were well printed. Very quiet printer. I can hardly hear him. The only drawback is the table without heating, so at first the plastic did not want to stick to it. I solved the problem by pasting on the table painti...

My first 3D printer)) ordered with delivery from Russia, surprisingly went very quickly, collected slowly 2-3 pm, while the roller was collected. But the seller sent it without problems. On the fourth day I packed the wires, popped a little with power, put the switch, as without it it immediately turns on and drives the fan, which I do not like. Well, come on, it's a trifle and everyone can finish it himself) after the video arrives, I will change this oblique to a normal remote probably Fan, a ...

This printer 400 Pro is a Monster! Arrived faster than expected at about 15 days in Greece well packaged! It was my first time assembly on a 3d printer but still didn't found it so hard to build it up on my own. I follow instructions in book that is inside but some photos were not so helpful and I had to figure out alone how to do some things... better not use included tools because some screws will not screw well. Need good measurement at beginning to balance the corners to be totally 90° or el...

The delivery was unbelievable fast, about 2 days. Packaging was really good, no damage to any parts. The build took about 10 hours in total. About an hour to level and calibrate (I was being fastidious). Very solid build, good quality parts. I really enjoyed building it. Print quality is really good. Very happy with this printer. My only complaint is the build instructions. The build instructions a very poor. Some steps are missing, some are lacking in information, some are wrong, some are in th...

Quite not a bad printer, it works quietly, except for the cooling fan of electronics, the frame is durable, but like all the not expensive models require improvements and maintenance before use. Linear bearings wash and lubricate definitely. The chip is washed. The z-axis end is changed to optical. The firmware is not refined, but it's not a problem, Marlin gets up and works normally. To work linear advance, you need to transfer the extruder driver from stealthchop mode to spreadcycle mode. Cxy-...

In 10 days of operation showed itself only on the positive side, already ran through itself 1 kg of different plastic, print at the level (even in the drain). But, the table cover is not for ABS, the models fly unpredictable from the moment of printing, especially the overall. The drivers are very quiet, they do not warm up, they are not Motors, but the fan of the power supply crosses all the noise in the room. From the factory, the table is twisted, it is visible for preventing defects in trans...

Error 1: Schroefdoorvoer ondersteboven Dit is een productiefout. De schroefdoorvoer staat zowel in de handleiding als op de filmpjes met de ronde kant naar beneden. Echter, met de aan ons geleverde delen moet hij bovenkant onder worden gemonteerd omdat anders de geleiders (printbed steunen) niet op dit onderdeel kunnen worden geschroefd. Op zich blijkt het geen probleem om ze ondersteboven te monteren. Error 2: M5 blijkt M4 in de praktijk In hetzelfde onderdeel zit nog een ernstiger fout. Zowe...

Nice little 3d printer. Directly usable out of the box. Prints fast. I tried printing PETG (ESUN) and found the best settings are 275c nozzle with 80c bed temperatures, with 5,5mm retraction and 0,1mm z-hop, all for best adherence and to minimize stringing. TPU (Overture) printed also ok, 220c nozzle. I have no experience with PLA. However a small inconvenience as the fillament expires the tension on the fillament sensor gets quite high, and possibly hinders smooth fillament input. See photo. A...

I am mainly happy, but there are some issues.... The good bits first, It is very easy to install, and the installation is really good. The firmware upgrade is simple and the technical support team are brilliant The downsides... The first is that in some ways, it is not what I expected. It says all metal, so I was expecting a metal extruder body along with all the other components. However, it has a plastic extruder body and the filament cooling duct is also plastic. This annoyed me, because ...