Ride Tech Moto Reviews - 1,360 Reviews | ridetechmoto.com

Ride Tech Moto ReviewsSee store reviews

Name: Ride Tech Moto
Rating: 4.8

Customer's black Arai Camera Mount attached to the chin of a graphic helmet, holding a DJI action camera.

Cory R.

I've been using the mount for about a month now and I'm really happy with it. I use a DJI Action 5 camera and it holds it weight fine. I've used another company's chin mount but that one did not hold my camera. I only wish I could've bought a white one to match my helmet.

Arai Corsair-X / RX7-V / EVO Camera Mount

Customer photo review of AGV K3/K5 S/SV Camera Mount

Benjámin S.

The product quality and design well over my expectations.! Very nice lock design, prevent accidental open, the glue is insanely strong. Fit well. Im very happy about the product. I ordered AGV K3/K5 mount for my DJI pro camera, fit perfectly.(I put a little bit too low on helmet, so at a tiny spot its not contact with the helmet, but it was strong as hell, I cant even took it back to reapply. Once you apply, it will never comes off :D )

AGV K3/K5 S/SV Camera Mount

Customer video review of AGV K1 / K1S Camera Mount

Sean B.

Received product within reasonable time frame using basic shipping. Product arrived and worked as expected. First time buyer of a chin style mount for action CAM. I used the tether, but it is really not needed. I have full confidence that my action cam is secured to helmet. wind resistance at higher Speeds is not an issue for this mount. I chose this product over "Chin mount", because they have brick and mortar in Canada, and I am not disappointed

AGV K1 / K1S Camera Mount

Overhead view of a customer's AGV K1S Camera Mount securely holding an action camera on a black helmet.

Francis S.

Super easy to install and it came with all the parts I needed to connect directly to my camera! It has held up very well with absolutely no signs of it starting to peel or come off, I certainly recommend it for anyone looking to mount their camera to a helmet.

AGV K1 / K1S Camera Mount

Customer video review of Bell Qualifier Camera Mount

Zied T.

The mount fits the shape of my helmet perfectly and the adhesive base attached securely to the chin area. Installation of the first part was easy and the fit is excellent. Unfortunately, when I tried to clip the camera mount piece onto the base, one of the side clips broke. In fairness, I may have applied too much force during installation, so this was likely user error rather than a defect. To keep using the mount, I repaired it with super glue. The mount now works, but because of the glue, I...

Bell Qualifier Camera Mount

Reviewer's camera mount attached to the chin of a red and white Arai helmet on a motorcycle.

Rene J.

It’s a Perfect Fit,Because they are modeled to your specific helmet. there are no gaps. They attach using heavy-duty 3M VHB tape. Also when camera isn’t used the bracket doesn’t stand out like a sore thumb.

Arai XD-5 / Tour X-5 Camera Mount

Reviewer's camera mount secured to the chin of a black motorcycle helmet, holding a camera.

Mark T.

Very easy to fit the mount. Clean area where mount is to be fitted with supplied alcohol wipe, allow to dry then peel backing from 3M pad on the back of the mount and press firmly into position. I would recommend fitting in fairly warm conditions. Allow 24 hours for 3M pad to achieve maximum adhesion, and hey presto, jobs a good un. Very stable and secure fixing with the camera attached.

Shipping insurance

Customer's close-up of a GoPro on the Shoei Neotec 3 Camera Mount, attached to the chin of a white helmet.

Edmund R.

The offset mount for the Shoei Neotec 3 is a game changer. Chin mounted action cams (I have a GoPro 13) are incompatible with the Neotec 3 as they severely limit access to the faceshield unlock function, chin vent and chin bar latch. I nearly ditched the camera thing because of this. Thank you Ride Tech!

Shoei Neotec 3 Camera Mount

Customer's close-up of the black Shoei GT-AIR 3 Camera Mount attached to a helmet with an action camera.

Steven K.

Absolutely perfect fit on the helmet. The mount is not a 3d printer item which is great, it is a quality mount that I'm very happy with will buy again when get another helmet.

Shoei GT-AIR 3 Camera Mount

Customer's black Shoei Camera Mount securely attached to the chin of a motorcycle helmet, ready for use.

Patric H.

Mount went on super easy and was ready to use in the 24-suggested hours. I have used it on my motorcycle as well as commuting on my ebike. Nice to have a camera mounted for safety!

Shoei RF-1400/NXR2/Z-8 Camera Mount

Customer photo review of Ruroc Atlas 1.0 / 2.0 / 3.0 / 4.0 Berserker Camera Mount

Jose M.

I’ve been running the Ride Tech mount on my helmet for a bit now, and I’m impressed with how solid it feels. The adhesive backing holds strong even at high speeds, and I haven’t had any wobble or vibration issues that would mess up my footage. Mounting the camera is simple—it clicks in firmly, and the angle adjustment is smooth enough to dial in the perfect view without fighting it. I also like that the low-profile design doesn’t make the helmet feel bulky or throw off balance. After a few rid...

Ruroc Atlas 1.0 / 2.0 / 3.0 / 4.0 Berserker Camera Mount

Customer photo review of AGV K6 Camera Mount

Mike A.

Nice quality mount that fits my K6 well . I didn’t notice any 3D printing marks like people have mentioned about other brands. I will order from these guys again next time I need a helmet mount. Thanks for the quick shipping.

AGV K6 Camera Mount

Customer photo review of Shoei Neotec 2 Camera Mount

Martin M.

Delivery was fast considering that it came from Canada via Netherlands. Everything required was in the kit. Solidly made and perfectly fitting I give it 5* and would recommend it

Shoei Neotec 2 Camera Mount

Customer photo review of J-Hook Complete Package

Jeremy A.

Mine broke when I had my “MOTO VLOGGING” helmet in my tour pack. This came in perfect time so I could get footage for this trip to sturgis! Thank you -ATCJEREMYRIDES-

J-Hook Complete Package

Customer video review of Bell Race Star Flex Camera Mount

Kyle B.

These are the best choice for chin mounts on the market. The mount is well made and has never given me concerns. This is my second mount (new helmet) and neither has shown any signs of failing. The attention to detail and clever design work on the mount for my race star gives me full surface area for the GoPro to, while keep easy use of the chin vent. As along as I’m buying helmets and putting cameras on them, I’ll use a ridetech mount.

Bell Race Star Flex Camera Mount

Customer photo review of Arai XD-4/Tour-X4 Camera Mount

Joel O.

Love this product! I had to wait a while to receive it because I live in Southeast Asia, but it was worth the wait. It fits perfectly on my Arai Tour-X4. I am very pleased with the purchase and can definitely recommend this product. 😀

Arai XD-4/Tour-X4 Camera Mount

Customer photo review of Biltwell Lane Splitter Camera Mount

Tyler I.

Great product! Works as expected and has held up better than other competitors products. Opted for the pro package and came with everything I needed to get on the road.

Biltwell Lane Splitter Camera Mount

Customer's HJC RPHA 1/1N Camera Mount installed on a blue and black patterned motorcycle helmet.

Ziul B.

I was buying the other brand, 3D print you know, and it never fit or was able to hear the "click" sound to make sure my Insta 360 was secure. This one is defiantly NOT 3D print and is well made. It looks and feels better, and it gives me the confidence that I wanted. Thanks

HJC RPHA 1/1N Camera Mount

Customer photo review of Shoei RF-SR/RYD Camera Mount

Martin T.

Excellent service from start to finish, mount arrived in good time.. Fit was excellent, and I have had no issues with movement or concern about losing my camera Follow the instructions, make sure the surface is clean warm the adhesive.. most important to allow it to cure though

Shoei RF-SR/RYD Camera Mount

Customer photo review of Shoei GT-AIR 2 Camera Mount

Chris H.

Fits well. Although it fits lower than I expected. Time will tell on the adhesive pad but early days seems to be a well made product being reasonably unobtrusive with the camera off. Very happy.

Shoei GT-AIR 2 Camera Mount

Customer photo review of AGV K1 / K1S Camera Mount

Aj M.

Brilliant. The quality you get exceeds the price you pay. I had a chin mount on my previous helmet and it is no where near as good of a quality as the RideTech chin mount. I will 100% buy from here again, really pleased with this purchase.

AGV K1 / K1S Camera Mount

Stuart S.

Great service and product. I’ve yet to do a proper test as weather has been terrible but will add a more up to date review after a good run on the bike.

Shoei GT-AIR 2 Camera Mount

John H.

The mount arrived in a short space of time, considering it was coming from way over the Atlantic ocean. I found that the mount fitted my model of SHOEI helmet perfectly. I am very happy with my purchase at a reasonable price.

Shoei GT-AIR 2 Camera Mount

Customer photo review of Shoei RF-1400/NXR2/Z-8 Camera Mount

Tetsuya K.

It's a part that is attached to the side of the helmet with double-sided tape to prevent falls, but I would like a rectangular one instead of a circular one. If you connect an intercom, you cannot connect a circle. Request for product development.

Shoei RF-1400/NXR2/Z-8 Camera Mount

Customer photo review of Alpinestars Supertech R10 Camera Mount

Aidan D.

The RideTechMoto R10 mount has been fantastic; it's very durable and compatible with both ChinMount and GoPro mounts. The design behind the extension of the pivot arm makes for great vertical shots. Would definitely recommend.

Alpinestars Supertech R10 Camera Mount

Customer photo review of Scorpion EXO-1400 / EVO 2 Camera Mount

Chris J.

Not had the mount long but so far so good, got the placement down first time and a little heat to pre warm the adhesive was simple but the mount lined up perfectly with the helmet and the adjustable mounts are spot on.

Scorpion EXO-1400 / EVO 2 Camera Mount

Customer photo review of Lens Alignment Adapter

Marc W.

Here's the view from my new helmet, with my new camera and my new lens alignment adapter. Bear in mind this is my first time ever to ride with a camera and having to deal with mounting one on a helmet and everything. To be perfectly honest the camera mount I purchased had everything you would ever need to pull it off with zero experience 😀 and mount that camera like a pro. Im living proof! Now I have to figure out how to work the camera. [email protected]

Lens Alignment Adapter

Customer's Sedici Strada 3 Camera Mount attached to an orange and black helmet, holding an action camera.

Felix W.

These are legit. I have exposed mine to sustained +110 MPH speeds (on a track of course) and it did not shake, vibrate loose, fall off, ect. I got the pro package with the 2 short extensions, but for my helmet setup I only ended up needing one of them. The mount is super easy to install yourself as well. Here's a pro tip: you can use a laptop to heat up the adhesive. I didn't have a hairdryer so I booted up my favorite FPS game and propped the mount with the adhesive side out near the exhaust fa...

Sedici Strada 3 Camera Mount

Customer video review of Shoei RF-1100/XR-1100 Camera Mount

Johann F.

Best regards from Germany! I couldn’t find anything similar here for my helmet model: Shoei XR1100 and this is really the BEST solution if you’re looking for a proper chin mount! Thanks again!

Shoei RF-1100/XR-1100 Camera Mount

Ido B.

Fits my helmet perfectly. Feels high quality and I really like it. This is the 2nd mount I bought, and I will definitely buy another for my next helmet. Highly recommended.

Shoei GT-AIR 2 Camera Mount

Customer photo review of Shoei X-14/X-Spirit III Camera Mount

Freyja J.

I am a blogger on YouTube and it is important that my chin mount is secure and I can trust it with my equipment. RideTech do a sterling job by printing the correct size to match your particular helmet. It was easy to install with the sticky backing that comes with the mount. To ensure complete sticky effect I left the mount on for 24 hours before placing my camera on it. No rattle, no slipping and it fits perfectly into the correct area. Recommended enough that if asked, I would be happy to be ...

Shoei X-14/X-Spirit III Camera Mount

Brian M.

The mount fitted well on Arai XD-4 helmet. I used a clamp to ensure it was well-connected to the helmet when I first stuck it on. The mount did not move during a 14-day Vietnam off-road tour.

Arai XD-4/Tour-X4 Camera Mount

Customer video review of Shoei RF-1400/NXR2/Z-8 Camera Mount

Michael T.

After my chin mount failed I replace it with a ride tech that was over two years ago, which is longer than i had the chin mount in the first place. I'm on my second helmetand second ride tech without failure.

Shoei RF-1400/NXR2/Z-8 Camera Mount

Bryan S.

Fits exceptionally well. Used a front mount on my Shoei RF 1400.. matched the detailed contours perfectly. Followed instructions and the mount is so secure that you need not worry about a tether.. great solution!

Shoei RF-1400/NXR2/Z-8 Camera Mount

Customer photo review of Scorpion EXO-1400 Camera Mount

Giovanni C.

Unique piece produced on exact helmet model. I was not able to find a GoPro holder for my helmet which has a particular design and RideTech solved my problem. Thank you so much!

Scorpion EXO-1400 Camera Mount

Steven H.

Fits perfectly on my Shoei Neotech II. I used a hair dryer to heat the install location and 3M adhesive, which made for a much stronger bond. I use my Insta 360 3S to shoot video of my rides.

Shoei Neotec 2 Camera Mount

David S.

Mount fits perfect and the adhesive makes it rock solid. Definitely heat it up before applying. Just for other users, I needed an extra extension to get the right angle for the camera, otherwise there isn’t enough clearance to tilt it up enough.

Shoei RF-SR/RYD Camera Mount

Chad K.

Works flawlessly on my Shoei RF-1400. I took a trip to TN shortly after i got this and wore my Go PRO on this mount most of the ride. Very impressed with the quality especially for something 3D printed.

Shoei RF-1400/NXR2/Z-8 Camera Mount

Customer photo review of Shoei GT-AIR Camera Mount

John K.

The gopro helmet mount works perfectly on my Shoei GT Air helmet. Small yet secure. I had a small problem with my first one but after a quick email Ridetech Moto sent me a replacement free of charge, no questions. Totally happy with both the product and the after sales service.

Shoei GT-AIR Camera Mount

Daniel O.

I googled GoPro helmet mount for Ruroc helmet, and ride tech was the first thing that popped up. After checking out their website I was pretty impressed with their options. I love how they make attachments for specific helmets. Because every helmet is a little different. Ordering was easy and the shipping was quick. Very nice packaging and the instructions made it really easy to install. I love it. I made a reel on my Instagram if you would like to see the install. dobrientattoos

Ruroc Atlas 1.0 / 2.0 / 3.0 / 4.0 Berserker Camera Mount

Ride Tech Moto ReviewsVisit store