Alexis P.
Have been using it with my GoPro Hero 11 & my Insta360 X3 whithout problems so far. I have the security rope attached to the inside of the helmet just in case something hits the camera and take it off the mount.
Ride Tech Moto ReviewsSee store reviews
AGV K6 Camera Mount
Jacob S.
RideTech GoPro mount is perfect! If you’re Looking for a budget friendly, reliable, well made GoPro mount that won’t burn a hole in your pocket or look ridiculous? you’ve come to the right place. Simple install and overall awesome GoPro mount!
Thanks!
AGV K1 Camera Mount
Fazlu A.
I had a strap on chin mount before this one and the video quality was not that good as it had too much vibration. With this new Ride Tech stick on mount made for my AGV helmet it is really good. Great service and product. I would definitely recommend it.
AGV K3/K5 S/SV Camera Mount
Matt S.
Fits my CL17 perfectly. I use my camera with filters and some extra audio bits so the mount has to be strong. I’ve never worried about safety. Now if they would offer a few color choices…!
HJC CL-17 Camera Mount
Kamil K.
Nice and secure mount that doesn't get into your field of vision. Can't even tell it's there with helmet on. Easily adjust angle for either upright seating position or for a full tucked superbike mode. I've got both and worked great over the weekend. Tested at over 130 mph and no issues.
Bell Star MIPS / DLX MIPS Camera Mount
Johan S.
The fit is excellent and the mount does not interfere with the ventilation.
Maybe the extension arm could be a bit longer to be able to adjust the angle of the camera, but that’s nitpicking.
Great product!
Schuberth C4 / C4 Pro Camera Mount
Josh H.
I've bought several of these mounts. A few for the rf-1200's, and a couple for the x-14's. All have been very well made, and I've never had one come off. I swear by these mounts, and pass my opinion on to anyone who asks. Great product!
Shoei X-14/X-Spirit III Camera Mount
John L.
Fits the contours perfectly. The mount was packaged very nicely as well. Used the included alcohol wipe to clean the mounting area, used a heat gun to heat up the glue and stuck the mount where I wanted. The mount holds GoPro mounts very snug. Would recommend!
Shoei RF-1400 Camera Mount
Franck B.
Fit perfectly, I use an hair dryer to soften the plastic and adhesive for the application. I was concerned about how strong it will be with the GoPro fitted in but no problem at all. I did some heavy off road in mid, clay and rain and had no issue what so ever. Awesome product.
Arai XD-4/Tour-X4 Camera Mount
C
I bought the bundle set and mounted with an Akaso 4K action cam in hopes of mimicking a dash cam set up for riding my motorcycle. The whole set up does add weight but it’s bearable. It took me a little longer than normal to place the mount on my helmet due to the open vent needing enough space when the clip is inserted into the mount. I recommend opening the vent when installing so you know how much space to expect. I haven’t had any issues and would definitely recommend to a friend.
Shoei GT-AIR 2 Camera Mount
Nicholas G.
So I purchased the helmet go pro mount for our new HJC RPHA 11 helmet and I have to say how impressed we are with this mount, custom designed for the HJC helmet and fits perfect. Thanks again for making such great products and also features fitting on our YouTube channel “motouk” cheers Nick
HJC RPHA-11 Camera Mount
Ernie R.
Best mount I've ever had. I love the low profile look it has with the camera on there. Easy install and it feels super sturdy and secure.
Couldn't recomend this enough.. If you are looking for a chin mount, don't grab one of those bulky ones that stick way out.. Best one especially if you're using the Arpha 11 pro
HJC RPHA-11 Camera Mount
Jeremy P.
Couldn't have found a better mount for my helmet. Fit the curve like a glove. Took a tumble on the bike a few weeks ago and mount stayed on the helmet with no problems!
HJC CL-17 Camera Mount
Andy S.
The adhesive pad provided wasn’t the best. So I used a compound that is a putty that goes hard after mixing together. That way I know I can trust the GoPro being mounted.
The profile of the mount is perfect and is easy to install. Small and compact which doesn’t leave the lines of the helmet ugly. Slim and perfectly formed. Highly recommend.
Arai XD-4/Tour-X4 Camera Mount
Chris D.
Chose this as it was designed to fit my helmet and I wanted a frontal mount rather than the side mount id been using. To be honest it took quite a while to arrive. Postal strikes were to blame I am told. When it did it was well packaged and fits like a glove. There are you tube videos showing how to fit and how long to wait before outdoor use. Have used quite a few times now including heavy rain and it feels solid and well made. Really pleased with how I can position my GoPro now. Would definite...
AGV K3/K5 S/SV Camera Mount
Brett B.
This GoPro mount fits perfectly to my Shoei Hornet helmet and provides a nice low-profile mount for my camera. I like that it is not as big and bulky as other options. I highly recommended it!
Shoei Hornet X2/ADV Camera Mount
Omar C.
Conforms well to the shape of the helmet. The mount is not cheap (cost), but worth it if it means saving a $300 GoPro. I lost a camera when the standard GoPro mount came unglued on a hot, sunny day from not fitting well on the helmet.
Shoei RF-1200/NXR Camera Mount
Denis N.
Great mount. Good price. Ordered the GT-Air mount and they’ve sent me the GT-Air 2 one instead, a quick email to the team and it was resolved instantly. Bit of an inconvenience but given the quick response and solution to the error I’d still give 5* .
The mount is great, rode about 2.5 hours in torrential rain and the mount still stuck on. This is the 2nd one I purchased from them and I will return for a 3rd if I ever need one.
Shoei GT-AIR Camera Mount
Dominic C.
Waited and even wrote in asking for when this was available for my new helmet. This is the 2nd mount I have bought and both have been rock solid. Thank you Ride moto, this is MUCH nicer than some of the other options out there. Much sleeker when you don't use a camera. This is my go to now for any helmet I have.
Arai Defiant-X / Renegade-V Camera Mount
Amanda B.
We bought 2 of these for our Shoei Gt air helmets for our trip round the nc500 and they did exactly what we had hoped, they fit perfectly, are easy to fit and use and are sturdy keeping our GoPro's safe and capturing the amazing memories on camera ! Thank you!
Shoei GT-AIR Camera Mount
Dan C.
Fitment is perfect. Smooth and easy. Stays out after allowing 24 hours to dry just for good measure. Wife loves it with her custom Sailor Moon paint job. Wonderful product!
Shoei RF-1400/NXR2/Z-8 Camera Mount
Denis N.
Arrived fairly quickly, tracking was there however the updates were a bit iffy, but understandable as it came from another country. Mount itself is very good, fits really well on the helmet, and quite strong, just make sure to clean and heat up the adhesive and you’ll have no issues. Overall great product, could be cheaper though.
X-Lite X-803 Camera Mount
Paul B.
The scorpion helmet I bought has a super complicated chin section, there was no way a flat mount would work. The Ridetech mount for perfectly and matched the helmet 10/10
Scorpion EXO-ST1400 Camera Mount
Ralf W.
It fits really good and I'm more than surprised. The 3M sticky pad holds well onto the helmet. Also the quality of the product is very good. If you want a sleek solution for a GoPro mount choose Ride Tech.
Shoei RF-1200/NXR Camera Mount
George S.
Awesome! Thank you very much guys! When purchased the agv complete package, the camera mount came broken. I contacted the team at Ride Tech and they send me immediately a new one! Thank you guys really appreciated!
AGV K3/K5 S/SV Camera Mount
Damjan Č.
It arrived relatively quickly considering all that is happening in the world. Fits nicely on my helmet and mounting it is so simple it feels like you're doing it wrong :D
AGV Corsa R/Pista GP RR Camera Mount
Kevin B.
I’ve was looking for a GoPro mount from the moment I got this helmet and the only way to get the GoPro in that specific location was using a long joints but it made the front very messy. This mount allows you to place the GoPro right on front of the helmet and once you put the GoPro on it looks clean.
Shoei GT-AIR 2 Camera Mount
Guenther S.
I ordered the mount for my HJC RPHA 11, and it fits perfectly! Shipping to austria was quick and easy! I can really recommend RIDE TECH mounts for your gopro rides 🏍️😉
HJC RPHA-11 Camera Mount
Risto R.
Your Shoei GT-AIR Camera Mount is just a great thing to have with my Gopro. Its easy to install and use with the camera. The delivery to Finland was as promised. Thank you very much!
Risto R
Shoei GT-AIR Camera Mount
Jonathan K.
The install was super easy and fit great, and with a little adjustment to angle of the arm it came with a GoPro 9 Black slots right in with no issues. It sits low enough you don't even see the camera while wearing the helmet.
Shoei RF-SR/RYD Camera Mount
Christopher D.
Excellent easy to install product. Been using the mounted Go Pro for months now zero issues. Clean low profile. I have recommended this to a few of my fellow riders. Ensure you follow the directions before use.
Bell Qualifier Camera Mount
Cyril A.
The shape fit perfectly the helmet. I didn't ride with it for the moment but I have no corcernt because I used to have regular mount on helmet with 3M glue and it never failled
HJC RPHA-11 Camera Mount
Gerald V.
It fits perfectly so far not even close to coming off. I bought the most expensive 3m tape and I don’t need it. Rode multiple times in the heat with the go pro on. I did clean the surface and heated up the adhesive then after I stuck it on I clamped it to the helmet overnight.
Shoei GT-AIR 2 Camera Mount
Liviu I.
Because the model shark helmet is not in your offer, I had to chose one appropriate model and it seems icon is the winner. Till now, the mounting it seems to be strong and the glue is also perfect. Thank you.
Icon Airframe / Airframe Pro Camera Mount
Wyatt F.
I make YouTube content for motorcycle racing. This is the best chin mount I've found that is light, small, and secure. Sponsor my videos so I can give some away! People are always asking me about it. Great product. Cheers.
HJC RPHA-11 Camera Mount
Jason A.
The mount is a beauty mate! Half way through an west - east crossing of the Aussie continent, the thing seem bulletproof, fits the lid perfectly! I'd recommend it to my mates no worries.
Arai XD-4/Tour-X4 Camera Mount
Jesse R.
Perfect fit, easy to install and is subtle enough that when you don’t have your action cam on it, it doesn’t stick out like a sore thumb! highly recommend and will be picking up more for my other helmets! Best looking mount i’ve found.
Shoei RF-1400/NXR2/Z-8 Camera Mount
Sasha D.
The shipment took a very long time but made it just in time for my trip. You need to use another extension to get the camera to tilt back far enough but overall great fit and doesn't obstruct your view.
Arai XD-4/Tour-X4 Camera Mount
Michael D.
This is a perfect fit for the new Arai Quantic helmet no modification required. I’m so glad I took the chance as I could not find a chin mount for my new helmet now my trips take on a new dimension. 100% recommendation.
Arai Regent-X / Profile-V Camera Mount
Caine K.
The fitment of the 3D printed part is excellent on my RPHA11. With the heating and shape, it's solid as a rock. Definitely not afraid of losing the GoPro at all.
Unfortunately not many trackday organisers allow helmet cams, but I will keep it on, hoping one day I can use it.
The angle is perfect and if your country allows these helmet cams during trackdays, definitely I can recommend the RideTech mount!
HJC RPHA-11 Camera Mount
Ride Tech Moto ReviewsVisit store