Tricia D.
Very easy to install and the mount is rock solid. This is a post WW2 French MOD 98 SVW MB and was happy to find a solution that didn't require machine work on this rare production rifle.
BadAce Tactical Reviews
+2
Mauser K98k NDT (No-Drill-Tap) Scope Mount Gen 3 - Open Box Item
+1William C M.
Been looking at this mount for a while. Super happy with my purchase. The overall fit and finish is great. Very good quality and easy to install. Have about 45 to 50 rounds through the rifle and still holding zero. Looking forward to my next trip to the range. It’s always a real blast!
Lee-Enfield NDT (No Drill-Tap) Scope Mount for No4 and No5 Gen 3
+1Karl S.
The mount fits like a glove. Replacement of the original sliding sight is easy.
The position of the picatinny rail allows the fitting of a scope without getting into the way of ejected cases and without drilling into a rifle from 1900. This requires a scope with large eye relief (ca. 22cm). In my case, I use a Crossfire II Scout 2-7x32 scope.
Shipment and delivery went very fast, payment of customs duty was easy (online).
Thanks!
Swedish Mauser NDT Long Eye Relief Mount for M38 and M96
+2Jean-pierre D.
I am stoked. This supers mount made its way all the way from Canada to South Africa via my friend in the UK - without any problems. Installation was right in line with specifications. Now my no.4 is ready for anything from a small Karoo Springbok to a big Kalahari Eland. All in one rifle. Thank you very much, Bad Ace!
Lee-Enfield NDT (No Drill-Tap) Scope Mount for No4 and No5 Gen 3
Paul L.
I received excellent assistance from the help personnel who were able to identify the correct mount for my 1955 Columbian Mauser. The scope mount retaining pin could have fit a bit more snug but was fine once the screws were tightened. The forward mounting, long eye relief scout scope, seemed odd at first but works exceptionally well. Many thanks to this Canadian company who made this no drill scope mounting quite easy to accomplish.
Scout Mount for Mauser Yugo M48, K.Kale, Spanish M43, VZ.24, Argentine M1909, Brazilian 1908 & 1908/34
Lee F.
I found the mount very well made. Install was easy. I shot the rifle in at 50 yards and all was good. It was holding nice groups of .75 to 1.0 with the cheapest 6.5 ammo I could find. First time I fired this rifle so I suspect with a little practice the accuracy could be brought to 1 MOA.
Very pleased!
Swedish Mauser M38 & M96 NDT Picatinny Scope Mount Low Profile Gen 2
Steve P.
Mounting system works great and was easy to install. Be careful as Garands need scope with more eye relief. My 3x green dot could not mount far enough back with 1inch relief. Still playing with scopes to see what works best. Rectangular reflex seems to fit and look the best, but the M1 really wasnt made for a scope anyway. It will never look correct, but works well inside 100yds.
M1 Garand / M1A Micro Red Dot Base and Picatinny Rail Mount Gen 3
Jamie C.
Easy to install, works perfectly. Love that the old gun can be returned to original spec if needed with no unsightly holes etc. Now a perfect hunting rifle for me!
Swiss K31 Ultra low-profile NDT Scout Mount for Long Eye Relief Scopes
+1Øivind Ø.
Bought the picatinny rail for my 22 wmr Chiappa little Badger to replace the plastic part it comes with. Mounted a 2-7x32 scope on it at it shoots great. I also ended up ordering the hammer extension as the scope made it difficult to reach. The hammer is now perfectly extended to my preferred side (i am left handed).Top quality, recommend.
Little Badger aluminum alloy Picatinny rail 5 inches
+1Barrett L.
See these before and after photos. Restored an old M1 Garand and wanted to add a thermal scope for pig hunting. Didn't want to make any permanent changes to the stock or the receiver. This was the perfect solution. And it fits beautifully and works perfectly. Look out wild boar! Here I come.
M1 Garand / M1A Micro Red Dot Base and Picatinny Rail Mount Gen 3
+1Mark S.
Great mounting platform for normal optics on a M1a system. My only observation was with my Vortex scope with 52 mm objective lense, if the forward part of your rail was a little shorter, I could have gotten away with low mounts instead of medium. Bring the scopes center closer to barrel center. Other than that, I think it's a very good product. Congrats.
M1A / M14 / M305 NDT Scope Mount Low-profile and Elevation Adjustable
Jon T.
It's solid and holds zero. I used removable blue Loctite. on the screws. Installed a Timney trigger and set it at 2.5 lbs. The scope is a 1-7 power vortex scout scope. the eye relief id perfect. With handloads I am able to get sub-3/4" groups!
Mauser K98K Ultra low-profile NDT Scout Mount for Long Eye Relief Scopes Gen 3
+1Gunnar B.
Restored a Savage Enfield No.4 Mk.1*, with hopes of turning it into a faux T model with the help of the Bad Ace scope mount. It’s easy to install & fits perfectly, and they thought of everything with the added washers they definitely came in handy! I would highly recommend the mount if you're looking to add a scope, but don’t want to tap your original rifle.
Lee-Enfield NDT (No Drill-Tap) Scope Mount for No4 and No5 Gen 3
Chere B.
I did not want to drill on my old mauser, the mount you offer fit perfect! I absolutely love it, very sturdy and holds zero perfect, I will be buying one soon for my Eddystone, great product.
Ultra Low-profile Mauser K98k NDT Scope Mount Gen 3 picatinny rail
James B.
This mount fit perfect on my M38 Mauser. The scope is a Vortex, Crossfire II, 2-7x32 Scout. The long eye relief built into this scope is required. After shooting a few hundred round at 300 yards the mount is still nice and solid.
I am very happy with mount. It's also very easy to remove if you decide you want to put your iron sights back on.
Gen 2 Swedish Mauser NDT Scout Mount Low-Profile for M38 and M96
+1Abdulhameed S.
Was looking everywhere for scope solutions for my Yugo m48 and found this on google. It fits perfectly and super simple to install and holds zero pretty well. Very worth the price and even showed people in my village and they were super impressed and even bought multiple types of scope mounts for their m1’s and Kar98!
Mauser M48/M48A Zastava Yugoslavia NDT No Drill Tap Scope Mount Gen 2
Omer F.
My Remington Pattern 14 is pristine, absolutely perfect. I could not bear to modify or change it in any way. The BadAce picatinny scope mount is an awesome choice, no drilling, tapping or grinding, it doesn't get in the way of any features of the rifle, and should I decide to remove it, I can restore the sight to factory. Installation was straightforward and easy, it's very solid, and looks incredible. I'm very satisfied with this mount!
Low-Profile Picatinny Scope Mount for Enfield P14 (Pattern 1914) and M1917 No Drill-Tap
Robert L.
The mount is fantastic. A week after installing, I took my 70-year old Enfield out and got two perfect kills with it. I couldn't be more pleased with the mount.
Lee-Enfield NDT (No Drill-Tap) Scope Mount for No4 and No5 Gen 3
+3David K.
Absolutely amazing company to do business with. The rail mount for my Mauser fit perfectly had it at the range put 30 rounds through the rifle and mount never moved at all. Was able to group the size of a quarter at 100 yards. Craftsmanship is top drawer finish is excellent. Will absolutely be doing business again.
Ultra Low-profile Mauser K98k NDT Scope Mount Gen 3 picatinny rail
Raymond T.
I have several of these mounts. All of them enhance the accuracy of the rifles. Had a problem with one on a Swedish Mauser mount and even though it was purchased over a year prior... The problem was taken care of immediately. That says a lot about the quality of the Company. On the Lee Enfield works well enough to go ahead and put a better scope on it.
Lee-Enfield NDT (No Drill-Tap) Scope Mount for No4 and No5 Gen 3
+1Frederik N.
I ordered my Scout scope mount for my German 1943 J.P. Sauer produced K98k and it fits like a glove, no wiggle or wopple, everything just fits perfectly and it keeps zero. lovely product and the wait time was one week of transport to Denmark.
Thank you Badace!
Mauser K98K Ultra low-profile NDT Scout Mount for Long Eye Relief Scopes Gen 3
+1Chris T.
Just tried the mount with about 20 rounds, so far so good! Just getting used to a scout scope.
Mount was easy to install, appears a well designed and made piece.
Thanks very much. 👍
Swiss K31 Ultra low-profile NDT Scout Mount for Long Eye Relief Scopes
Christian K.
After one year of use, i'd like to share my experience with you about this mount. I have to admit, that i did a little research about the product, before I bought it. While doing this research, I found someone here in Germany, who actually had this thing in use. He told me, that the mount fits a little loose, so he had to do a little subbase under the mount, to hold it in place properly.
Well:
I bought it and for me and my k98 k, it fits perfectly.
And I would highly recommend this thing. In my...
Mauser K98K Ultra low-profile NDT Scout Mount for Long Eye Relief Scopes Gen 3
Jeffery R.
This is the one!
Having owned almost every iteration of optic mount for the SKS, I feel that this mount takes it to the next level.
Super solid mount with excellent installation hardware and instructions.
In my opinion this really makes the SKS into a much more viable self defense firearm.
SKS Micro Red Dot Mount Gen 2
Matthew G.
Worked perfect on my 1917 eddystone 30-06. I love it and it worked perfect. Happy customer and would recommend to anyone with a 1917. Just got done refinishing the stock on mine and putting the scope on. Looks great.
Low-Profile Picatinny Scope Mount for Enfield P14 (Pattern 1914) and M1917 No Drill-Tap
Jason N.
This mount is by far the lowest profile mount for the M1A I could find. I mounted a Vortex Viper PST GENII scope. When I took it to my friends gun shop, his gun smith asked me for all the info on the Badace mount to recommend to his other M1A owners. The mount looks great and is rock solid allowing for a lower profile and requiring a lower cheek riser to be installed on the butt stock. This is a military grade product and I love it.
M1A / M14 / M305 NDT Scope Mount Low-profile and Elevation Adjustable
Michael L.
This BadAce scope mount really changed my Model 96 Swede. At my age, I struggle with open sights, and this allows me to get the most out of this rifle. It now shoots MOA. Install was easy and took maybe 10 min. Now I have to get one for my Springfield.
Gen 2 Swedish Mauser NDT Scout Mount Low-Profile for M38 and M96
![Customer photo review of Little Badger 6.3 inches Picatinny rail with iron sights [WITHOUT the handguard]](http://images.loox.io/uploads/2025/2/13/vuZViXQU0.jpg)
George B.
The front sight and rail with rear sight was very easy to install and no issues sighting in. I got consistent 1 inch groups at 50 yards leaning over a fence for support.
Little Badger 6.3 inches Picatinny rail with iron sights [WITHOUT the handguard]
+1Kelly Z.
Great metal thread protector to complete the look of the bad ace tactical iron sights. I lost the plastic one that came with the gun on the second range trip. I tried a 3d printed one and that one shattered almost immediately. So far so good with the metal one!
Little Badger aircraft grade aluminum alloy muzzle thread protector
Shaun E.
It looks awesome on the gun and with that model which is a 1903 bolt action 30-06. I would recommend this kit for this type of gun. Easy to install and looks great. Love the outcome
Springfield M1903 NDT Picatinny Scope Mount
+1John S.
Easy to install. A great design to keep rifle original and still be able and use it for hunting. I am using a Vortex
4-12x40 and have enough clearance to operate the bolt.
Mauser M48/M48A Zastava Yugoslavia NDT No Drill Tap Scope Mount Gen 2
+2Neil S.
I have never bought anything from Bad Ace before, very happy with purchase-red dot mount for SKS is of great quality! Very happy they are Canadian! Keep up the great work!
SKS low-profile NDT red dot mount Gen 3 with back-up iron sight
Richard S.
As noted, The shirt is printed and shipped in the U.S. -- The shirt I received was shipped out from San Diego, California. The shirt quality was of EXCELLENT material. Heavy Weight, 100% Cotton manufactured by Gildan! The printed Mosin design was AWESOME, as well!!! I'd DEFINITELY buy another shirt!!! Just too bad the AWESOME Mosin Scope Mount wasn't from the U.S. too lol -- SUPERB SERVICE!!!!! MAHALO NUI LOA (Thank you very much) for your time and business!!!!!
Mosin Nagant rifle cotton T-shirt with vintage ammo can labels dark font
+1John H.
I have an I.F. K98K .30-06, I bought decades ago. I believe it came from Israel as all the Waffen marks are peened out, so great condition, but not collectible. I bought the scout scope and it fit perfectly, I mean tight! I bought the suggested Hi-Lux and it was just right with some low weaver rings. The scope is very clear and I found the setup looked great together. With the scope on 7x I zeroed at 100yards. This rifle is usable for hunting now as I couldn’t see the iron sights well enough to ...
Mauser K98K Ultra low-profile NDT Scout Mount for Long Eye Relief Scopes Gen 3
+1James M.
I had been looking for a good, no-drill mount for the enfield for awhile and found this a few years ago. I hadn't ordered it and kind of forgot about it while I put an enfield project on the back burner. I finally ordered it and to say it is high quality is putting it mildly. It is very well-made, rock solid, and doesn't permanently modify the gun. With it on there, I was able to zero the rifle very easily and put 50 rounds through it with no shift. Very glad I bought it and will likely get anot...
Lee-Enfield NDT (No Drill-Tap) Scope Mount for No4 and No5 Gen 3
+1Brian H.
I found the Bad Ace Enfield scope mount very easy to install on my MKIV, No 1* Parker Hale sporterized Enfield. The only challenge I faced was with the ejector screw. The short one didn't result in ejections and the long screw interfered with the travel of the bolt. I resolved the issue by grinding down the screw one thread at a time until I got good ejection with no interference to the travel of the bolt. My experience at the 50 yard range went well. After bore-sighting the scope, elevatio...
Lee-Enfield NDT (No Drill-Tap) Scope Mount for No4 and No5 Gen 3
+2Steve N.
Mount is rock solid. Boresighted and then went on the range at 50 yds. First hits were upper left, but adjusted the sights to the final 3 shots...the cloverleaf in the bullseye.
Great mount, easily followed directions, and absolutely complete in all respects. Thanks guys!
Swiss Schmidt–Rubin 1911, K11, 96/11 NDT Scout Mount for Long Eye Relief Scopes
Shahram S.
Solid mount so far. Holds zero but I might have to use red loctite on the 3 screws securing the mount to the rifle since that area gets super hot and have had screws come loose. Will update when more testing is done
SKS Micro Red Dot Mount - ultra-low direct micro sight mounting
Trevor C.
Very very pleased with this mount, installation was very simple. It is excellent in the fact there is no permanent modification, and it holds zero great. Has been true through about 100-150 rounds and out to 700 yards thus far. I will be purchasing this mount or design again for other surplus rifles as I further my collection. Highly recommend!!!!! Installed on a VKT D marked m39. Accuracy has been excellent. Less than .5" 3 shot group with handloads, cold bore.
No Drill Scope Mount for Finnish Mosin Nagant M39
Nick M.
Totally satisfied with this scope mount was easily able to install within a few minutes & it fit perfectly onto my Mosin Nagaunt 7.62x54r / M 91/30
I highly recommend it to anyone looking for a great scope mount
Mosin Nagant NDT Scope Mount Ultra-low Profile for M9130 Round Receiver
BadAce Tactical ReviewsMore details