Byrd C.
Lots of great options for any truck/mechanic guys!! Still ordering parts and can’t wait to get them all installed! Just installed the High flow Thermostat and immediately noticed a huge difference in temps!!
Snyder Performance Engineering ReviewsSee store reviews
+4
SPE CCV Reroute Kit
Phil S.
Another Great product from SPE. Fit and finish were perfect and installation instructions made the actual install a breeze. I didn't order the internal/external catch can. I got a 3/4" exhaust venturi for like $55 and welded it into my mid-pipe and just run any fumes and/or oil vapor right out the exhaust. The amount of hose you get standard with the kit is the perfect length. I know not everyone has access to a welder and what not, just sharing what I did. As always 5 stars and fast shipping wi...
SPE Motorsport CCV Reroute Kit
Jon S.
Been running lots of spe parts on my 2018 6.7 and I have had the best results from all the parts. This intercooler made a big difference in spool up time, have not done a egt test yet. Install was super easy. Fit and finish is by far the best out there.
SPE Motorsport 2011-2023 6.7 Powerstroke Booklung Billet Intercooler
Edward M.
Turbo installed super easy. Manifolds lined up turbo fit perfectly took about 5hrs to remove the old KC stage 2 and put this one in I went with the 66mm ball bearing and it spools quicker and has more power than the KC. I am running a 10mm stroker and GDP tuning in my truck best turbo system I’ve had so far. I’ve had the stock turbo, no limit stage 2, and the kc stage 2 and this turbo out preforms all of the other turbos I’ve destroyed.
SPE 6.7L EMPEROR TURBO SYSTEM- Fits 11-19 Powerstroke
+2Ryan W.
Another great upgrade from SPE!! Very easy and fast install. And of course I’ll be back for more. I will note that my 2017 oem hoses were starting to weep coolant around the oem T’s so maybe coincidental but as they say an ounce of prevention is worth a pound of cure.
SPE Motorsport 6.7 Powerstroke Factory Replacement Coolant Degas Hose Kit
Phil S.
I love it! Easy straight forward install. Shipping was quick and SPE sent me notifications the whole way. Going to make fuel filter changes that much easier without having to mess with those lame plastic factory clips.
SPE Motorsport 2017+ 6.7L Powerstroke Fuel Filter System
Wesley A.
Super easy install on my 15 6.7. Great product to go along with all my other SPE items. Bonus is I feel like I gained a little bit throttle response.
SPE 6.7L Powerstroke Hot Side Intercooler Pipe
Andrew G.
Easy install! I recommend getting it with the oil feed lines and pan! Temps are much lower now at cruising speeds. I’ll be looking forward to see how much lower while towing across the country.
SPE Motorsport 2011-2016 6R140 Transmission Cooler
+4Frank U.
This was my first purchase from SPE and it was a great experience. Removing the factory CCV filter was a pain but once off, the SPE replacement was an easy install. Seems like a great quality product. Next up are the front and rear diff covers from SPE.
SPE Motorsport 2011+ 6.7L Powerstroke Recirculating CCV Kit
Michael R.
I had the first version of the disaster kit on my truck. My mechanic that specializes in Powerstrokes show me a truck that was in his shop that was leaking fuel from the fittings. I already bought the 2.0 kit and intake manifold from SPE for my truck. I had him install them when he was changing my wiring harness. He was impressed with the new version (first one he installed) and so am I. Its a more factory look and a better design.
SPE Motorsport Ford 6.7 Disaster Prevention 2.0 Kit 2011-2014
Carl C.
Nice product, nice OE fit, no coolant drain necessary. I always prefer using the OE clamps for better equal clamping uniformity, but thank you for suppling clamps! I love the high temp. hoses and stainless tees! As always worth the wait.
SPE Motorsport 6.7 Powerstroke Factory Replacement Coolant Degas Hose Kit
Butch C.
This was the finishing touch (for now) on all that I have installed on my truck. Looks great and is a top quality part, pipe has nice smooth curves and boots are very heavy duty. I installed it in a couple of minutes. You can't see everything I have purchased/installed but I didn't just do things that look good, I installed items that are the weak links to the Ford 6.7L. The list is long and Includes disaster 2.0 kit, recirc CCV w/internal catch can, low temp thermostat, upper and lower radiato...
SPE 6.7L Powerstroke Hot Side Intercooler Pipe (Fits ALL year non-HO trucks)
Xuanqian W.
Waiting for my SPE intake system to arrive then install all together but this kit looks very high quality. I like the OEM style metal line and the transparent filter cover that allows me to inspect any time. A lot of people complains that their CP4 still fail with the disaster kit and they totally misunderstand the purpose of this kit: It will NOT prevent CP4 from explode, it prevent the debris from CP4 into the entire fuel line and injector which is a very expensive repair. It is an insurance, ...
SPE Motorsport Ford 6.7 Disaster Prevention 2.0 Kit 2020-2026
Stephen P.
I purchased this new SPE diesel filter system to upgrade the original OEM system. Ford’s fuel filter was hard to replace without spilling diesel at both locations. It was easy to spill fuel on the top of the engine, the new T manifold stops that from happening, and the upper filter has been eliminated. The lower system was also hard to replace without spilling fuel, the new spin on filters made changing easier, faster, and less time-consuming. The spin-on filter has better and larger capability ...
SPE Motorsport 2017+ 6.7L Powerstroke Fuel Filter System
Lawrence F.
Installed with the 60 gallon S&B tank, I have a short bed but needed the long bed version to make it work. The install was pretty simple with the 2020s the 3 fuel lines coming from the pump are not clip style 2 stage lock fittings. They are simple push and release fittings. That’s the only thing that held me up. Love the product and the sales team is super helpful!! 👍🏻👍🏻
SPE Motorsport 2017+ 6.7L Powerstroke Fuel Filter System
Cody P.
Worked perfect with my S&B intake. Kit was very well built and included everything you need to install it minus the silicone coupler for the center turbo inlet which I just reused the factory one. Overall very happy with the intake kit alone side the hotside piping.
SPE Motorsport 2011-2022 6.7 Powerstroke Intake Piping Kit
James P.
Kit was very easy to install. Worst part was getting all the stock intake crap off to get to the fuel pump. I also installed the SPE intake manifold kit at the same time so it made putting everything back together a lot simpler! I can’t imagine how much of a pain in the butt putting the stock manifold back together would be. The instructions were good but it wouldn’t hurt to have a video of putting the kit together and installing it as an option.
SPE Motorsport 11-19 6.7L Powerstroke Disaster Prevention Kit
James P.
Fantastic product!! This is the 2nd time changing out my cab mounts on my 2012 F250 in probably 4-5 years. I tried out some polyurethane mounds and the were the worst so I went back to stock. Now that they went to crap, I decided to try these out and I am very glad I did!! These are very well made mounts, perfect fit, and a great ride. Hopefully they will last the rest of this trucks life. Highly recommend!!
SPE Motorsport 2008-2016 Super Duty Cab Mounts
Wayne M.
Another excellent product from SPE. The factory degas hose easily broke at the “T” fitting with one hand. Glad I don’t have to worry about that anymore. Good to have a company that makes replacement parts the way the manufacturer should.
SPE Motorsport 6.7 Powerstroke Factory Replacement Coolant Degas Hose Kit
Sam M.
I love it. This thing is bullet proof. I was shocked at how well built it was. I love the fact that it moves the screen lower in the pan to get to the cooler fluid. It was easy enough to install and will be testing it in a couple of weeks when I pull my 28' trailer from Michigan to Pennsylvaina.
SPE Motorsport 2011-2019 6.7L Powerstroke 6R140 Deep Transmission Pan
+3Terry M.
I installed this kit on a 2025 F-550. Had to do a little custom plumbing to make work on the aft of axle tank but it fit good. We’ve been doing these conversions on all our new 6.7 trucks before they even leave the shop! It’s absolutely the best filter conversion on the market! Excellent quality and much easier filter changes! Another top tier product for SPE!
SPE Motorsport 2017+ 6.7L Powerstroke Fuel Filter System
+1Tyler G.
I came home one day to find a small pool of liquid under my truck. After some investigating it was determined to be from the quick disconnect end of the upper rad hose. After researching for a bit I knew I had my choice of upgrade in SPE! Man was I ever right in doing so. My only regret was not making the switch sooner! The hardest part of the entire process was taking the old stock hose off. Instal of the new hose and adapters, was a breeze. This is top quality stuff. You can tell its build wit...
SPE Motorsport 2011-2022 6.7L Powerstroke Upper Radiator Hose
Ricky G.
Easy install. Hardest part was draining coolant. Those plastic drain cocks. One on the left is a piece of cake. The right one is facing forward and hard to get to.
SPE 6.7L Powerstroke Low Temp, High Flow Thermostat
Ron S.
I had installed a high capacity oil pan but didn't have a way to let anyone servicing my truck know. The obvious solution was to go to SPE and pick up a 16 qt. oil filler cap. It matches my other SPE upgrades perfectly. Thank you.
SPE Motorsport 2011-2022 6.7L Powerstroke 16-Quart Billet Oil Cap
+1Darvin Y.
I had a diesel tech that I trust from my local ford dealership do the install. I am sure that I could have, but I am certain that it was done right. I also had him do a SPE CCV re-route while he was there. This was his first experience with the SPE kit. The ford tech usually does the S n S DPK Kit but He did like the the idea of being able to see physically the filter for inspection . And by comparison he said that it was a lot cleaner looking under the hood than the S n S dpk.
SPE Motorsport Ford 6.7 Disaster Prevention 2.0 Kit 2020-2025
+1Brian F.
The kit was complete. The lines look great and the fittings threaded together easily. Install was pretty easy. Pretty happy with the product. Only gripe I have was with the instructions. Use them as a reference and not a precise how to. A new instructional video should be made for us first time mechanics that are wanting to save $600-$800 in labor
SPE Motorsport 11-19 6.7L Powerstroke 6R140 Transmission Line Kit
+1Perry P.
2025 F250 Lariat Ultimate 6.7 with only 6k miles but heard so much negativity on the factory cold side pipes bursting in the 6.7’s that I just had to replace with an SPE pipe. Pretty easy to install and big difference from stock as the wall thickness of stock cold side pipe felt flimsy compared to the SPE Cold side pipe, big upgrade!
SPE 6.7L Powerstroke Cold Side Pipe
Charles S.
This is the gold standard for catch cans. Build quality is sick - from the machining to the small drain back fittings, everything is first rate. Couple that with the cleanest install available, and you have a product that does not disappoint.
SPE Motorsport 2020-2022 GT500 Billet Oil Separator Catch Can
Darren H.
The quality of the parts is beyond my ability to explain. Installation was quick and easy. SPE will be my go-to for all future needs, I couldn’t be more satisfied.
SPE 6.7L Powerstroke Cold Side Pipe
Logan G.
It was no picnic getting the rear bolts out of the oem ccv box. That being said the kit was easy to install no issues with fitment whatsoever. Happy with the install and happy with spe for being informative with my delivery and to add to that the thing that tops it all is you guys send stickers which is a huge plus. Lol.
SPE Motorsport 6.7L Powerstroke CCV Reroute Kit
Jacob S.
Pretty easy install, found a different location to use than what was suggested on the instructions, wanted it further back than the fuel pump. I still need to adjust the brake cable. However my petcock broke, I will contact SPE to see if they can send a replacement
SPE Motorsport 6.7L Powerstroke External CCV Catch Can
Colt W.
2012 6.7 F350; Like all have stated, the old one is a challenge to remove, and the install of this functional recirculation system is an easy smooth process. It looks clean and cleared the area so you can actually see an engine.
Not sure why you would want to go through the challenge of R&R the factory CCV when you can do it one time and have a professional billet recirculation system. One bolt, off comes cover, pull out stainless screen, clean and back in, in way less time than removing the ba...
SPE Motorsport 2011+ 6.7L Powerstroke Recirculating CCV Kit
+1Josh J.
Customer service was top notch! Paul was a huge help. I had the gen 1 exofilter that was installed poorly by a shop and caused it to leak, I dealt with Paul and ordered up a gen 2 exofilter. The gen 2 is far superior to the gen 1, being able to see the “juice” without taking off a cover is handier than a shirt pocket! And the location of the factory return line is in a way better position to keep unneeded strain off the line. Big fan of SPE with their quality of product and customer service. Mor...
SPE Motorsport 2011-2026 6.7L Powerstroke Disaster Prevention Exofilter- 2.0
John S.
2017 f350 6.7 intake manifold with hot and cold side tube's works great quicker spool up colder egt's more power better mpg. Cold side pipe was kinda tough to get positioned nicely and some of the tbolt clamps could have been just a hair bigger. Overall great purchase great product great results my truck is covered in spe stuff and will get more soon
SPE Motorsport 2011-2024 6.7 Powerstroke Intake Piping Kit
+1Eugene R.
Bought the stock one to stop my truck from running hot. It did but the temp on the stock one allows temps to reach just under 200 degrees. Once I installed SPE low temp I haven't hit 180 degrees at 100 degree ambient temp here in Louisiana. I am much happier because I know my truck runs cooler. Thanks SPE!
SPE 6.7L Powerstroke Low Temp, High Flow Thermostat
Roy Q.
My dealer said the transmission needed replacement due to a flare and hard downshift in and out of 4th gear. I instead chose to install this valve body and it has solved the shifting issues and has my transmission running nice and cool. I only wish SPE sold the seal kit to go with this product as a complete solution. I'd recommend this product to others.
SPE 6R140 Proprietary Solenoid Body
+3Michael B.
This is intercooler is built extremely well! Yeah kinda expensive but well worth the money. Shipping was fast once it was in-stock lol. Looks even better powdercoated if you ask me. Definitely a must buy if you are pushing your powerstroke to the next level!
SPE 2011-2023 6.7 Powerstroke Booklung Billet Intercooler
Steve S.
I was very pleased with the overall install and the product. Because I had a 2024 with the regulator. Had to added a bushing due to the OEM screw was to long. I will source a shorter screw and swap it out. I would also recomend added bracket to keep the coolant line off the Cat filter. I created a bracket and offset and secured the line.
SPE Motorsport 2023+ 6.7L Powerstroke Oil Filter Housing
+1Courtney B.
Thank you SPE Motorsport for making such great products. I ordered and received this drain valve billet piece, went ahead and performed an engine service. Drained the fuel/water separator filter, removed the housing, then removed the stock drain valve. Installing the billet part was so easy, nice fit, and I live in Alaska we’re it’s -30degrees and no leaks from it. So I’m super stoked with the new part, works great and looks awesome. Thank you SPE.
SPE Motorsport 2017-2024 6.7L Powerstroke Gen-2 Billet Fuel Drain Valve
Sam E.
I have a 2015 Ford F-250 6.7 Powerstroke and I had already installed the CCV Reroute kit. I installed the External Catch Can and this was a Nice addition to that kit and easy to install.
SPE Motorsport 6.7L Powerstroke External CCV Catch Can
Snyder Performance Engineering ReviewsVisit store