YoraHome Reviews - 2,506 Reviews | yorahome.com

YoraHome Reviews

Name: YoraHome
Rating: 5.0

Customer photo review of YoraHome® SilverBack Benchtop CNC Router 6060

Colin P.

I made my first attempt at multi-coloured resin pouring on a cutting board that I made today. It consists of cutting the black shape of the eagle to a depth of about 1/8" deep, pouring the black and allowing it to cure for about a day, then cutting the white portion (same depth), pouring the white and curing finally cutting the yellow/gold, pour and cure. After this, I cut the final shape of the cutting board. The board is sanded, soaked in a food-safe mineral oil and finally finished with bee's...

YoraHome® SilverBack Benchtop CNC Router 6060

David G.

2nd slate attempt. 80w yora on a silverback. Just an image I saved from internets. 3000/20% stucki . Slate from michaels was prepared using 2x clear , one coat. Im not impressed with slate yet as it doesnt have the pop that tile does. Next time I will laser raw slate then clearcoat.

YoraHome® SilverBack Benchtop CNC Router 6060

Colin P.

This is a recent project of mine using my Silverback and 80w laser. It consists of four layers of 3/16" Maple plywood two of which were stained darker brown than the natural Maple of the other two. And then glued together. It makes a nice trivet. You can see the different levels and detail in the close up image.

YoraHome SilverBack Benchtop CNC Router 6060

Darren L.

My first ever attempt at using a bowl and tray bit or vbit was today, over the moon with the results. I was very conservative on feeds and speeds so I know I can cut time down a bit but I'm so impressed by my silverback and what can be achieved with it but still wish the cross river was available in the uk (nudge nudge 😝)

YoraHome® SilverBack Benchtop CNC Router 6060

Colin P.

Just completed a large router-cut Pirate Ship clock for my garage on my Silverback. It's made entirely with scraps of Mahogany glued together that I found around my workshop.

YoraHome SilverBack Benchtop CNC Router 6060

Joshua K.

The last supper was epic; I'm amazed by the incredible detail. I used a 1/2 down cut end mill, then a 1/32 ball nose taper. It took about 6 hours of carve time; I went slow. This was a practice run to see what detail the Silverback 6060 can do. Mind blown!

YoraHome® SilverBack Benchtop CNC Router 6060

Customer photo review of YoraHome SilverBack Benchtop CNC Router 1x1M|39x39"

Ken

Great machine! Very easy to set up and get carving. I went for the 1X machine, Jeremy has answered any questions about the silverback amazing start to my sign hobby. Can't believe it's been almost a year already, and no issues at all! Love my machine, looking forward to a bigger and better spindle.

YoraHome SilverBack Benchtop CNC Router 1x1M|39x39"

Jon W.

Many different techniques here. CNC used was Yorahome Silverback, laser engraved the artwork, the epoxy filled the accents. I don't think epoxy counts as inlay, but thought I would share. This 2'x2' piece led to a 4'x4' sign sold for $1600 (last 2 pics). Both pieces paid for my Silverback and upgrades.

YoraHome® SilverBack Benchtop CNC Router 6060

Customer photo review of YoraHome® Laser Engraving Machine 6550 (With Z-Axis)

Jeff S.

So its been some time since posting.. Been busy making Christmas Ornaments and fall things for all the fall shows.. But here are 2 windspinners I've added to my shop.. Not my typical windspinner... 6650 80w upgrade.

YoraHome® Laser Engraving Machine 6550 (With Z-Axis)

Chris S.

Getting the most out of the Silverback 1Mx1M. Cutting with compression bit, not vacuuming and no tabs. 12mm MDF components for a project build. Another half metre of 12mm then about 4 1Mx1M of 18mm parts.

YoraHome® SilverBack Benchtop CNC Router 1x1M|39x39"

Customer photo review of YoraHome® CrossRiver Benchtop CNC Router 6060

Daryl D.

11"x13" cutting board/cheese tray There is no scrap material in a wood shop. Just material laying in a pile ready for the next design you imagine in your mind. CrossRiver /water cooled spindle Jenny 1/2" Bowl Bit

YoraHome® CrossRiver Benchtop CNC Router 6060

Colin P.

I recently purchased the new SilverBack Air Assist. Boy, what a difference that has made to my clean burns and the ability to cut through. This is a trivet for placing hot items on the table/countertop. Made of four layers and about 5/8" thick. 7"x7" in diameter.

YoraHome® SilverBack Benchtop CNC Router 6060

Askif Y.

It has taken me quite a while, lots of trial and error, but here is the result of my first significant project with my CrossRiver. **I LOVE THE CrossRiver**. My son is an AVID (BEYOND AVID) Pittsburgh sports fan. I made him pens from seat material from Forbes Field, Three Rivers Stadium, and Heinz Field and the display cases to hold them.

YoraHome® CrossRiver Benchtop CNC Router 6060

Customer photo review of YoraHome® Laser Engraving Machine 6550

Laurine A.

Perserverance wins out. I am quite happy (finally) with this canvas. I ended up doing just 1 layer of black, I just don't like the way the white spray comes out. 6550 Pro with 96w laser - Speed 2700 mm/min, Power 22%.

YoraHome® Laser Engraving Machine 6550

The Dusty W.

Wanted to post these hardwood catchalls, created on my Silverback 6060. I am a Woodworker first, so stage 1 was cutting the hardwood strips to size, glue ups, then machining and finishing. This machine is an awesome investment. Can't say enough about the incredible support the company & this group has to offer. I'm easing into semi-retirement for health reasons (kicking & screaming lol) but was honoured to win a Platinum award in Carpentry & Woodworking as voted by our local community. Thank you...

YoraHome SilverBack Benchtop CNC Router 6060

Customer video review of YoraHome Laser Engraving Machine 6550 (With Z-Axis)

Jeff S.

2 years ago I took a shot at purchasing a laser engraver from YoraHome. I bought the 6550. Since then I have updated it to a 32bit board and a 80w laser. Added the Camera kit too.. I couldn't be happier with the choice I made. Never in my wildest dreams did I think I was capable of some of the projects I've completed on my Yorahome 6550... I've only needed help a few times, nothing with equipment failure, but the set up of the upgrades.. All I can say to that is the Customer service at Yor...

YoraHome Laser Engraving Machine 6550 (With Z-Axis)

Colin P.

My attempt to support my country, Canada.🇨🇦 Canada adopted me nearly 60 years ago. A Maple Leaf carved in my workshop. It has a key slot on the back for hanging and measures 10" high by 9" wide x 1" thick. Made from Mahogany and coated with Semi-gloss Varathane.

YoraHome® SilverBack Benchtop CNC Router 6060

Gary H.

A friend brought me the board and an idea, and this is how it turned out (2nd pic is after he oiled it). 6550 with the 96w module. LaserGRBL, 3000mm/min, and 30% power.

YoraHome Laser Engraving Machine 6550 (With Z-Axis)

Colin P.

I've been commissioned by customers to create a custom cribbage board in the shape of Vancouver Island, tailored for four players rather than the usual three. The first piece sold within 48 hours. I think I'm going to enjoy this!

YoraHome® SilverBack Benchtop CNC Router 6060

Jeff S.

I've had this Devine Mercy Cross file for about 4 years. Have made and sold many of them. About a month ago I was at a show and had all my crosses on the tables including the Christmas Nativity and He is Risen Light Up crosses that i have posted here before. Had a guy ask if u could make the Devine Cross light up like the others.. I answered, of course I can... This Cross turned out beautifully if I do say so my self...🤪 This Cross is 12.25"×10.5" 7 layers

YoraHome® Laser Engraving Machine 6550

Joe S.

My first carve. Learned a lot. This was a test thanks and Daryl for all the help. A lot to improve before go to walnut 20x20 in. Carving is another level from engraving. The journey begins.

YoraHome CrossRiver Benchtop CNC Router 6060

Mark C.

Always impressed with the Yora 80w diode laser. My contractor with their C02's have gone bust so I pulled out the Pro I have sitting in the shed and put it into action. Yes, it will take longer but I know it's reliable and the output is just somehow better quality.

YoraHome® Laser Engraving Machine 6550

The Dusty Woodworker

Carved these crescent moon catchalls & nesting round catchall on the Silverback 6060. I used a 1/4" downcut bit on the moon tray, 1/2" bowl bit on the round trays. Crescent moon File was purchased from etsy. Used the 6550 pro to laser the moon sequences graphic in the pocket of the round catchall. I adjusted the step over to 20% and had very little sanding. These machines have such huge capability. Best investment I ever made!

YoraHome SilverBack Benchtop CNC Router 6060

Laurine A.

YoraHome® Laser Engraving Machine 6550 (With Z-Axis)

Jeff S.

Moved onto the next hot item out of the shop.. Had a file for key holders. Made a few, and didn't sell any in a month.. 🤔 Shrunk them down, created a bracket and made night lights out of them.. My Yorahome 6550 80w upgrade has been busy.. Since launch of the night lights, 168 lights ordered, and 150 requests for the bracket file..😁... Love my 6550.. Just a sample. There were originally 45 styles.. But I created a few from scratch for custom orders..

YoraHome® Laser Engraving Machine 6550 (With Z-Axis)

Peter C.

Just been playing with various things, and working out what does what, did the outline first with a 3mm corn mill bit then changed over to the 60° tip, added the words, deleted the outline and going well

YoraHome® SilverBack Benchtop CNC Router 6060

Alan M.

You all make some amazing things but I think I am finally starting to get the hang of it myself. Almost 30 hours of carve. The flower petals are less than a 1/32 of an inch thick.

YoraHome® SilverBack Benchtop CNC Router 6060

William C.

My first design, burn, build. Created test files for etching and cutting then used the settings for the cut. Using the CrossRiver with a 20W laser head. If i have to make something it better be useful.😁

YoraHome CrossRiver Benchtop CNC Router 6060

Customer photo review of YoraHome CNC Laser Engraving Machine 6550-Pro (All-In-One System)

Alisa M.

A friend recently lost her brother she wanted something for his gravesite that was fishing found this as an ornament on ETSY and enlarged it and offset it to give it depth for her. Not fancy but exactly what she asked for! Thank you YoraHome for such an awesome machine to give me the opportunities to help friends! I 🥰 my 6550 Pro

YoraHome CNC Laser Engraving Machine 6550-Pro (All-In-One System)

Benjamin K.

Doin a few things in shop today: Dog on round Mirror from dollar tree 1000/425 Using a YoraHome 6550-Pro Same picture on Birch plywood using YoraHome 6550 40 watt, 1175/525 What great machines!

YoraHome CNC Laser Engraving Machine 6550-Pro (All-In-One System)

Jeremy K.

See in these pictures, the YoraHomeCROSSRIVER with the VFD Spindle upgrade, the stock 500w spindle kit, and the laser mounting plate with the 80w diode laser. This machine is a beast and it is ready to get to work. More coming soon!!!

YoraHome® CrossRiver Benchtop CNC Router 6060

Martin M.

I designed and made a rack for my Beautiful Lady's paint brushes. Haha I'm even happy that I got the tabs and slots to work properly lol 🤔🤣😜 This is all done in Lightburn on my 6550 Pro 80w machine😁

YoraHome CNC Laser Engraving Machine 6550-Pro (All-In-One System)

Joe C.

The new 96w laser is incredible. A few upgrades added a new world to my side gig. Olive tree cutting boards, Oak whiskey barrel tops and slate coasters. YoraHome 6550 running 40 power and 177 speed.

YoraHome CNC Laser Engraving Machine 6550-Pro (All-In-One System)

Lee W.

After a steep learning curve, I finally finished the first carve on my Silverback. This is a clock for one of my wife’s friends that is retiring. Just put the final coat of polyurethane on it and will then do the final assembly of the clock components. Overall, I’m impressed with the Silverback and its functionality. Easel was pretty easy to use after a few dozen YouTube videos. Still more to explore. A big thanks to Daryl Dinkel for all his help and all the rest of the folks on here that chim...

YoraHome SilverBack Benchtop CNC Router 6060

Mark C.

The weekend project - Solid oak Baseball holder for a major fan of the Yankees here in the UK. Worked on the SILVERBACK - designed in EASEL. Used the Super Gradient Generator by (Ethan Kinney) for the cone shapes and imported the "Picture" bits via SVG.⚾🇬🇧🇺🇸

YoraHome SilverBack Benchtop CNC Router 6060

Kimberley Q.

Photo for attention purposes! Black walnut charcuterie board, design carved on the Silverback. Just off a call with Jim Rarey. Outstanding customer support! This is why I'm on my 4th machine with YoraHome. Problem solved in 20 minutes and I'm back to engraving. Thanks so much Jim!

YoraHome SilverBack Benchtop CNC Router 6060

Lee W.

Had a little fun carving a bourbon barrel lid with my Silverback for a local tattoo artist. Found a battery operated light kit at Hobby Lobby for $7 that fit right in the 60 degree v grooves.

YoraHome SilverBack Benchtop CNC Router 6060

Customer photo review of YoraHome CO2 Laser Engraving Cutting Machine (Including CW-5000 Water Chiller)

James H.

I started with a simple project of reward tokens using 3mm craft plywood. I was able to cut and engrave these very quickly with one pass and on 25% power on the cut step. This power setting has been consistently working for my 3mm cuts. I haven’t had a chance to do ¼ or ½ inch wood, but I am sure it will cut just fine. I will just need to dial in the settings. Masking for most projects is a must and I would recommend just getting a big roll from a good source. I have TransferRite Ultra 582U Med...

YoraHome CO2 Laser Engraving Cutting Machine (Including CW-5000 Water Chiller)

Customer photo review of YoraHome CNC Router 3018-Pro (With Laser Module Kit)

Dave Y.

A photo of my niece’s home. Yorahome 3018 Pro with bed extension and 15w laser. Maximized contrast and converted to grayscale in Gimp 2.0. Exported pic as a .png file and brought into LaserGRBL. Fine tuned contrast and white clip, then ran multiple horizontal and vertical passes on 14” X11” of 3/4” thick aspen. Like cooking a rack of ribs, go low and slow. Patience is key.

YoraHome CNC Router 3018-Pro (With Laser Module Kit)

Nana's W.

We had a blast crafting today! Check out all the cute finished products! We had a lot of requests for a Thanksgiving AND a Christmas project so be on the lookout for an event later this month and one next month!

YoraHome CNC Laser Engraving Machine 6550-Pro (All-In-One System)

YoraHome ReviewsMore details