Dirty Diesel Customs Reviews - 6,998 Reviews | www.dirtydieselcustom.ca

Dirty Diesel Customs Reviews

More details
undefined review of 2013-2022 Cummins CCS EZ-Lynk TCM Tuning (CCS-EZ-RAM-TCM) image 1 out of 1
Rene D.
Recent weight loss, and tuned. Didn’t like what I got, researched brought me to dirty diesels, they were very effective in communication showing proper direction on a good tune for my application with TCM, I’ve since upgraded to unlimited . Excellent customer relations with quick replies. Thumbs up on helping customers. Not afraid to recommend.
2013-2022 Cummins CCS EZ-Lynk TCM Tuning (CCS-EZ-RAM-TCM)
undefined review of 2020-2023 Duramax S&B Cold Air Intake Kit (75-5137-1) image 1 out of 3+2
Jordan O.
Love the intake. Install took a lot of messing around. Getting the discharge pipe fed around the back of the engine bay and onto the turbo, that part sucked. Very little room to work in, and hard to get the best hand positioning. The GM engineer that designed that engine bay, ugh you suck. Just be prepared for a few hours of time investment and lots of swearing. But the sound of that intake and the look is awesome. I very much suggest this part.
2020-2023 Duramax S&B Cold Air Intake Kit (75-5137-1)
undefined review of 2005-2024 Cummins PowerFlo In-Tank Lift Pump image 1 out of 1
Ivan B.
The photo is the factory feul pump/sending unit that I replaced with the Fleece powerflo unit. The Fleece unit was a perfect drop in fit and fairly easy install. I feel a bit more responsiveness and have peace of mind with the high quality and lifetime warranty. Great product and even better service from DDC!
2005-2024 Cummins PowerFlo In-Tank Lift Pump
undefined review of 2013-2018 Cummins C&C Monster-Ram Intake System (42804) image 1 out of 1
Jackson N.
Its an awesome kit, instructions are awesome and has everything you need. Instalation is super easy and quick. After seeing bd diesels fix for the grid heater bolt I wish I would have gone that route.
2013-2018 Cummins C&C Monster-Ram Intake System (42804)
undefined review of 2013-2018 Cummins Turbocharger Boost Tubes (25995) image 1 out of 1
Evan W.
Pain in the a** to install but far better than stock. Boots are very nice but very tight I had to use wd40 to get the boots on the turbo
2013-2018 Cummins Turbocharger Boost Tubes (25995)
undefined review of 2003-2007 Powerstroke Hot Side Charge Pipe (SDG-INTRPIPE-6.0-HOT) image 1 out of 1
Steven P.
Fit well. I had to use one old clamp. As one of the new clamps was too large and would not tighten up enough without maxing out on the threaded section. The new pipe has an exterior bevel that secures the hoses on better. So far the intercooler pipe has not blown off like the factory pipe kept doing.
2003-2007 Powerstroke Hot Side Charge Pipe (SDG-INTRPIPE-6.0-HOT)
undefined review of 2008-2022 Cummins 6.7L - Deep Sump Transmission Pan (1061525) image 1 out of 1
Tristan M.
Easy to install once the factory pan was removed. Should save tons of time on transmission services on the future. Trans stays much cooler using this which should help it see some higher mileage.
2008-2022 Cummins 6.7L - Deep Sump Transmission Pan (1061525)
undefined review of 2017-2023 Duramax 3.5" L5P Downpipe (L5P-EXH-A004) image 1 out of 3+2
Kim M.
Fits awesome! All the welds are top notch and the flange perfect. Nice polish stainless! Did Ceracoat mine for protection. You’ll have to remove the turbo to remove the DOC and install the downpipe, get the EGR kit to get all the Hardware and only do the job once. They should come together as a kit. Add a silencer if you don’t want a awesome sounding truck.
2017-2023 Duramax 3.5" L5P Downpipe (L5P-EXH-A004)
undefined review of 2011-2022 Powerstroke Gen2.1 CP4 Bypass Kit w/ Return Filter Assembly (CP4-6.7F-BP-G2.1) image 1 out of 1
Mark R.
Great kit, not too bad to install, did my egr removal and ccv reroute at the same time, kit is well thought out, good materials, 10/10 for how well the instructions are written and the color photos.
2011-2022 Powerstroke Gen2.1 CP4 Bypass Kit w/ Return Filter Assembly (CP4-6.7F-BP-G2.1)
undefined review of 2010+ Cummins EZ-Lynk SOTF Switch (FTCummins/Titan) image 1 out of 1
Rene D.
Works well, product is good quality, instructions easy to follow, installation was a breeze. Done this between home and work, I would say it’s about a half hour job to do a clean job start to finish.
2010+ Cummins EZ-Lynk SOTF Switch (FTCummins/Titan)
undefined review of 1994+ Cummins Steering Box Brace (855x-04) image 1 out of 1
Rowan Z.
I decided to try this on my 18' 2500 6.7 Cummins after having a tiny bit of steering play that I thought would go away after upgrading my track bar with a Carli Track bar, so I ordered this and installed it. Installation was super easy. I'd recommend getting a crows foot to torque this properly for the steering shaft extension (Its an 1 3/4" crows foot, but you'll need a big adjustable to take the stock Pitman arm nut off, but it's super loose from the factory). I ended up replacing the hardware...
1994+ Cummins Steering Box Brace (855x-04)
undefined review of 2013.5-2022 Cummins Upper & Lower Ball Joint Set (4) (6821-7460A-KIT) image 1 out of 1
Jordan A.
Extremely impressed with the quality. Super convenient as far as the ability to rebuild/tighten. Instructions from EMF were top notch. Install is a breeze, removal of old BJs is an absolute nightmare, thankfully they’ll never have to press out again.
2013.5-2022 Cummins Upper & Lower Ball Joint Set (4) (6821-7460A-KIT)
undefined review of 2017-2019 Duramax EGR Solution Package (L5P-EGR-A000) image 1 out of 3+2
Kim M.
The coolant hose fittings are good quality fittings, the block off plates are perfect fit, All GM OEM Gaskets are supplied with this kit. Check the installation guide and plan for atleast a few hours for the OEM component removal.
2017-2019 Duramax EGR Solution Package (L5P-EGR-A000)
undefined review of 2001-2016 Duramax DSP5 Switch (DSP5-SOTF) image 1 out of 1
Richard W.
Love the product I love the programs I got for the transmissions and everything by far one of the best ones I've used awesome people to deal with very polite got back to me real good time answered all my questions would use again and recommend that all my friends
2001-2016 Duramax DSP5 Switch (DSP5-SOTF)
undefined review of 2014-2019 EcoDiesel Intake Manifold Kit (41390) image 1 out of 1
Stefan P.
EcoDiesel is running like a dream now. There was a lot of crud in the OEM intake and swirl valves were seized. After the install and tuning. No more p200a and exhaust even smells better
2014-2019 EcoDiesel Intake Manifold Kit (41390)
undefined review of 2007.5-2018 Cummins Iron Horn Turbo Kit image 1 out of 1
Jason H.
Start off with costumer service was awesome by pointing me in the right direction and questions I had. It's a good kit. Fast shipping, Instructions are great. The exhaust was a little harder had to modify the hanger that holds exhaust at the transmission other than that easy kit to install. I thought there would be more turbo lag than what there is I would say it's about the same off the start I think it pulls harder when you get it spooled up. With the tune that's on the truck and the BD Diese...
2007.5-2018 Cummins Iron Horn Turbo Kit
undefined review of 2013-2018 Cummins S&B Intake Kit (75-5068) image 1 out of 2+1
Joe K.
I definitely hear and feel a noticeable difference and my turbo spools up considerably faster. Exhaust brake is also louder. I absolutely LOVE it. Always great products and always amazing service from DDC !!! 👊🏻😎
2013-2018 Cummins S&B Intake Kit (75-5068)
undefined review of 2013-2018 RAM Billet Fuel Filler Cap Fix Kit (A036/A049) image 1 out of 2+1
Marc M.
Very pleased! The product looks great and is SO MUCH BETTER than factory! Ram should be sponsoring you guys! Fast shipping and great customer service! I’m going to post on the Cummings page and show your work! Way to go Dirty Diesel Customs!
2013-2018 RAM Billet Fuel Filler Cap Fix Kit (A036/A049)
undefined review of 2011-2024 Powerstroke No Limit Air To Water Intercooler (67IC) image 1 out of 1
John V.
Tight fit, but was able to do this in my driveway. Huge gains on the lower end of the rpm range. Love this product, must have for any 6.7 power stroke !
2011-2024 Powerstroke No Limit Air To Water Intercooler (67IC)
undefined review of Cummins/Duramax Satin Black Ram Air Differential Cover (19249) image 1 out of 1
Chris F.
No more pulling differential cover to change the oil! All plugs are magnetic and an awesome sight glass to see oil level! Looks good too! Banks really did an awesome job with this differential cover!
Cummins/Duramax Satin Black Ram Air Differential Cover (19249)
undefined review of 1994-2003 Powerstroke KC 360° Turbo Rebuild Kit (300124) image 1 out of 2+1
Les F.
Super simple to do. Hardest part was taking the turbo apart. 8mm 12 point 1/4” drive socket is required. Don’t be alarmed it you don’t use everything in the package. They are for all years of the 7.3. Shout out to Charlie at KC Turbos. Great Product!!!
1994-2003 Powerstroke KC 360° Turbo Rebuild Kit (300124)
undefined review of 2013-2018 RAM Billet Fuel Filler Cap Fix Kit (A036/A049) image 1 out of 1
Mike D.
Fits great and looks better, no more worrying about breaking the fill neck even more then it was .super easy install, In and done under 5 minutes .couldn’t be happier
2013-2018 RAM Billet Fuel Filler Cap Fix Kit (A036/A049)
undefined review of 2009-2023 Cummins Dirty EGR/Cooler Delete (I67-EGR-A006) image 1 out of 2+1
Wayne S.
The parts are top quality. Very detailed instructions that are printed in color. Very simple step by step install. The hardest part was pushing the coolant hose down onto fitting in the rear of the engine.
2009-2023 Cummins Dirty EGR/Cooler Delete (I67-EGR-A006)
undefined review of 2013-2021 Cummins - CCS Tuned EZ-Lynk Auto Agent 3.0 image 1 out of 1
Kristhian M.
Very satisfied whit the purchase and customer service. I’m in Panamà (the country) and I was very confident doing the work knowing I have the support. I will definitely recommended.
2013-2021 Cummins - CCS Tuned EZ-Lynk Auto Agent 3.0
undefined review of 1994-1997 Powerstroke S&B Intake Kit (75-5131) image 1 out of 1
Dustin B.
Very impressed with the kit. Install was super easy, the instructions were easy to follow, and had a QR code that brought you to the link. I did notice that the side of my hood doesn't sit flush now, but may have to readjust the intake box to see what is in the way. Changed the exhaust at the same time and there is a noticeable difference in power.
1994-1997 Powerstroke S&B Intake Kit (75-5131)
undefined review of 2003-2013 Cummins Front Driveshaft Loop Kit (0313-FDSLK) image 1 out of 1
Darren B.
Great insurance to help protect yourself and the truck. The front driveshaft loves to break and come through the floor, break the fuel and brake lines as well as wreck the transmission wiring and potentially break the transmission and transfer case. Cant save the transfer case with the loop but it’s getting harder to find the transmission wires so this is a small price to pay to save a world of headache later. Highly recommend this product. Very easy install as well.
2003-2013 Cummins Front Driveshaft Loop Kit (0313-FDSLK)
undefined review of 2013-2018 Cummins Engine Air Intake Heater Delete (42714) image 1 out of 1
Hendrik H.
Dirty diesel customs was really good to deal with. I live 1300km from there shop so I phoned to see what intake plates they had in stock and they had the Banks one I wanted, so I ordered online and within a day i had a tracking number and had my parts delivered to our post office in 5 days! . I’ve ordered other diesel parts from other shops within a 650km radius of where I live (so half the distance) phoned to make sure they to have it in stock hoping to get it fast but it always seems to always...
2013-2018 Cummins Engine Air Intake Heater Delete (42714)
undefined review of 2001-2010 Duramax 75" Bolt-On Traction Bars 3.5" Axle Diameter (035-3-HSP) image 1 out of 1
Spencer K.
Love the traction bars, super easy to install. My truck feels so much better to drive now. Also the customer service was excellent, they didn’t have the colour I wanted in stock originally but gave me a bunch of options for a solution. All the parts where individual wrapped to prevent any damage during shipping, very impressed and happy with my purchase.
2001-2010 Duramax 75" Bolt-On Traction Bars 3.5" Axle Diameter (035-3-HSP)
undefined review of 2004.5-2007 Duramax KC Billet Compressor Wheel (300662) image 1 out of 1
Travis N.
Everything fit well and sounds great! Only thing I'd say is since this is a DIY. You should add 4 up pipe gaskets and 2 turbo oil drain gaskets. Otherwise great product.
2004.5-2007 Duramax KC Billet Compressor Wheel (300662)
undefined review of 2004.5-2010 Duramax Screamer Turbo (1045840) image 1 out of 1
Dawson W.
BD products are absolutely solid! I definitely suggest going with the screamer as an upgrade. My truck performs very well from start to top end. Fuel mileage has increased significantly along with my BD injectors. Great job BD and Dirty Diesel!!
2004.5-2010 Duramax Screamer Turbo (1045840)
undefined review of 2006-2010 Duramax HD Charge Tube Package (garage-sale-PGD0610KT_N) image 1 out of 1
Dawson W.
Really good product. The kit came with everything required and I painted it before install. Recommend lightly lubricating the lower end of the hot pipe( drivers side) and slide the hose onto the pipe almost all the way. This will give you more clearance to align the lower connection after the turbo is connected. Install the turbo hose connection first and then line up the lower connection and slide the hose off of the pipe and complete the lower connection to the intercooler. For the cold side p...
2006-2010 Duramax HD Charge Tube Package (garage-sale-PGD0610KT_N)
undefined review of 2011-2019 Duramax KRYPTONITE Stage 3 Leveling Kit w/ Fox Shocks (KR11STAGE3FOX) image 1 out of 1
Mason G.
Really happy with the end result. A few hurdles to get there.. highly recommend using a proper torsion loading/unloading tool. Makes the torsion portion feel much safer and easier. Once the keys are swapped the rest of the job is quite straightforward. Ride quality seems unaffected and steering clearance has improved dramatically. Just awaiting my alignment for the final touch.
2011-2019 Duramax KRYPTONITE Stage 3 Leveling Kit w/ Fox Shocks (KR11STAGE3FOX)
undefined review of 2013-2018 Cummins Gen 2 Ram Air Intake System (42798) image 1 out of 1
Chance H.
Install went well the 6th injector was of course the hardest part. Using a 19mm crows foot with the shortest extension actually worked great, the ratchet will fit up behind the mount for lifting the engine making it easier to tighten/ loosen. Glad to have the grid heater engine killer off the truck, banks install video was perfect and so was the fit.
2013-2018 Cummins Gen 2 Ram Air Intake System (42798)
undefined review of 2007-2009 Cummins Cold Air Intake Kit (42175-D) image 1 out of 2+1
Jaden L.
Sounds great compared to my old AFE Stage 1 the afe was louder on the lower psi turbo noise but the banks really screams at high psi turbo noise. Customer service was great and the shipping suprisingly fast, overall very happy. My bank account is a different story haha
2007-2009 Cummins Cold Air Intake Kit (42175-D)
undefined review of 2014-2019 Cruze/Equinox/Terrain Delete Pipe & EGR Upgrade Kit (DDC-DP-20) image 1 out of 2+1
Noah F.
Good product a lot more space in engine bay once that canister is out is a bit of a process as had to remove turbo and exhaust manifold to get DPF out but once downpipe is installed found a little more responsive not as much boost lag plus is slightly louder and can hear turbo a bit better would recommend
2014-2019 Cruze/Equinox/Terrain Delete Pipe & EGR Upgrade Kit (DDC-DP-20)
undefined review of 1994-2003 Powerstroke KC300x Turbine Wheel (300106) image 1 out of 1
Les F.
There is no comparison between these two turbine wheels. I haven’t fired the truck yet but wow is all I can say when looking at them side by side on my bench. I have paired it with the 5/5 wicked wheel that I bought a few years back. Looking forward to the low end spool gains. Thank you Dirty Diesel. Shout out to Charlie at KC Turbos.
1994-2003 Powerstroke KC300x Turbine Wheel (300106)
undefined review of 2013-2018 Cummins Gen 2 Ram Air Intake System (42798) image 1 out of 1
Adam A.
The parts are super high quality and made a noticeable difference in performance, but even better is peace of mind eliminating the problematic grid heater bolt. DDC really helped out when one of the parts was missing out of the box ( box came that way from Banks) and DDC opened another box and overnight shipped me the missing parts. Couldn’t be happier.
2013-2018 Cummins Gen 2 Ram Air Intake System (42798)
undefined review of 2007-2018 Jeep JK Adjustable Ball Joint Kit (4127KN) image 1 out of 4+3
Khairul A.
hi.. already install the ball joint.. feel good so far.. steering more to right just now..maybe not yet aligment..overall, feel the steering not shaking anymore.. just a bit trauma Dead Wobble..😁 thanks you very much👍😍
2007-2018 Jeep JK Adjustable Ball Joint Kit (4127KN)
undefined review of 2013-2018 Cummins 4-5" Lift Front Performance Series 2.0 RR Shock (985-24-100) image 1 out of 1
Dustin Z.
Easy enough to install, taking the tire off makes it easier to compress, but you can do it with the tire on, ride is much better then the. NX2 shocks I had when they were good.
2013-2018 Cummins 4-5" Lift Front Performance Series 2.0 RR Shock (985-24-100)
undefined review of Shipping Insurance image 1 out of 2+1
Rhett S.
Intake and resonator delete look awesome! Took longer than expected but was updated through the process and was told prior to ordering my color would take longer. Overall great product and great service.
Shipping Insurance
Dirty Diesel Customs ReviewsMore details