Warren N.
All parts well labeled. Had an issue with the camboard as pictured. I have opened a support ticket with this company. Waiting on resolution so unfortunately I have not been able to get past this point in the build.
FYSETC ReviewsSee store reviews
+2
FYSETC Newest version Corexy 3D Printer VORON 2.4 R2 PRO With DSI5 Display CNC Hollow Gantry High Quality Printer
Eliran G.
Best build, all part are perfect.
Voron 0.2 R1 V1.1 Pro CoreXY 3D Printer Kit with CNC Gantry mini Stealthburner Upgraded CATALYST Motherboard Best Quality Parts
Cory P.
The Voron 2.4 I am building is still in progress. The ClickyClacky Door mod is impressive, though!!!
FYSETC Clicky-Clack Fridge Door For Voron 2.4/Trident 350mm
Zxac C.
Its exactly as its supposed to be great!
Clone Prusa i3 MK3S+ Printer Full Kit Upgrade Prusa i3 MK3 To MK3S 3D Printer Kit DIY MK2.5/MK3/MK3S 3D Printer
Adam P.
The touchscreen is not working as it should with the default configuration on RPi, a little fix is needed.
The touchscreen is working just fine after commenting out "dtoverlay=vc4-kms-v3d " in /boot/firmware/config.txt
More details at:
https://osoyoo.com/2019/09/20/instruction-for-raspberry-pi-5-dsi-touch-screen/
FYSETC Raspberry Pi 5 inch DSI Touch Screen MIPI LCD V1.1 5 Inch LCD Touch Screen 800 X 480 DSI Display IPS Working With Raspberry Pi5/4B/CM4/3B+/3A+/3B/CM3/CM3+/2B/B+/A+
+1Yashoda K.
It was so good
For Creality K1/K1C/K1 MAX 42-40 and 42-60 Stepper Motor Stepper 42 Motor 40MM 60MM Height Square Motors 3D Printer Parts
+1Paul F.
Building it was a blast! Definitely adding a voron to my list of things to do!
Clone MK3S+ with Printparts
Arthur D.
Absolutely beautiful!
For Bambu Lab P1 X1 A1 A1 MINI Piano Music Box Kit 3D Printer Model Kit
Petra M.
The description is wrong. The candlelight firmware does not create a COM port. It is also wrong that there is a jumper to enter boot mode. In the photos you see that there is no jumper, neither for boot mode nor to enable the 120 Ohm resistor. You must solder this.
It does not support CAN FD.
But apart from the wrong description it works well.
FYSETC UCAN Board Based on STM32F072 USB to CAN Adapter Support with CAnable / CandleLight / Klipper firmware
Ramon H.
Prints like a dream. By far my favorite out of all my printers. Love it!
Voron 0.2 R1 V1.1 Pro CoreXY 3D Printer Kit with CNC Gantry mini Stealthburner Upgraded CATALYST Motherboard Best Quality Parts
Boriss H.
Perfect for the price
Voron 0.2 V0.2 R1 PRO CoreXY 3D Printer Kit with CNC Gantry mini Stealthburner Upgraded CATALYST Motherboard Best Quality Parts
Nathan V.
Excellent kit from FYSETC!
FYSETC Newest version Corexy 3D Printer VORON 2.4 R2 PRO With DSI5 Display CNC Hollow Gantry High Quality Printer
Rick R.
I received aluminum extrusions for the Trident, when I ordered for the 2.4, meaning that the extrusions were 30mm too short. I have contacted Fysetc to see what they will do to correct, and so far have not responded.
FYSETC Clicky-Clack Fridge Door For Voron 2.4/Trident 350mm
+1Michael T.
Great package for this low price. And a good basis for a redesign
Doron Velta 3D Printer Doron Velta Don’t including RPI Board Free Shipping And Free Tax
+1Jan K.
The wires on the m36 board are so poorly isolated that it shorted out my mainboard and the m36. Wouldn't recommend this to anyone. But iam way to deep down the rabbit hole for me to stop using it. So i bought a new one. Hopefully it won't explode this time.🥲
FYSETC CATALYST Motherboard Based ON ARM A55 & M4 support SPI and UART for Tmc2209 Voron V0 High Quality 3D Printer parts
Alexander
High quality of a product, fast delivery and good packaging. Everything corresponds to description.
FYSETC 1.5mm Hard Surface Magnetic Stickers High Temperature Resistance 3D Printer parts for 3D Printer Steel Sheet
Aiden E.
Works great with my sidewinder x1
FYSETC Spider V3.0 32Bit Motherboard STM32F446 Control Board Support Klliper/Marlin/RRF with CAN Interface for Voron
C T.
Hotend fan was Dead on Arrival. Cheetah 2.0 board or steppers struggle with stealthchop and will layer-shift if enabled. M2 bolts for mounting linear rails are… bad. PTFE tube could be better. Otherwise a good kit.
FYSETC VORON V0.1 0.1 Corexy 3D Printer Kit with Enclosed Panels
Tyler A.
Great product. Replaces the OEM motor for my Prusa MK4. Definitely recommend if you are in need of a replacement motor
For Prusa MK4 Stepper motor E-axis Extruder High Temperature Resistance Motors for Prusa MK4 3D Printer Replacement Parts
Tomasz Z.
They work very quietly :)
TMC2209 v3.0 UART Stepping Motor Driver Stepsticks Mute Driver 256 Microsteps Current 2.8A Peak VS TMC2208 TMC2100
Kevin N.
Hadd issues with the board when it initially arrived. Could not test the board using the limited documentation. Could not find support for it anywhere. I loaded my Arduino app and it works, but would have been helpful to get support.
FYSETC E4 board with built-in Wi-Fi and Bluetooth 4 pcs TMC2209 240MHz 16M flash 3D printer control board based for 3D printer
Jeff G.
Good kit. Wish it had instructions so you didn't have to reverse engineer the Voron setup to put it together.
FYSETC Newest Voron 2.4 R2 V2.0 Upgraded Aluminum Alloy Frame Lighter and Tighter 3D Printer Parts CNC Machined Metal Full Part
P W.
Great to deal with, order was easy and medium delivery time. The extruder is great quality and works like a dream.
FYSETC Phaetus D3vil Creality K1/K1C/K1 Max DXC Extruder with Upgraded Helical gears Provide High-quality 3D Printing for K1
Darren C.
Very easy to use. Super easy to update klipper firmware. Couldnt be easier IMO
FYSETC Portable Input Shaper with RP2040 Upgraded 3D Printer Parts Support Klipper for Voron 2.4 0.1 Trident
David M.
Unfortunately doesnt fit CW2 extruder properly which causes trouble with extrusions, had to replace it with cheap plastic parts which work spot on. Kit doesnt include seating pin for the little part which is shame.
FYSETC CNC Pom Helical Gear Nano Coating Hardened steel Higher precision one-piece gear kit for VORON 2.4 Trident CW1 CW2
David W.
The Stealthburner toolhead was pretty straightforward to set up and is great to use. Find a good end to end tutorial for the firmware upload, and enjoy!
FYSETC SB COMBO V2 StealthBurner CAN Tool Board V2 Based On STM32F072 With TMC2209 Running Klipper Firmware 3D Printer Parts
User
Hello.
The teeth cut into the plastic well.
Flaws:
1. Bearings and joints are not lubricated. I couldn't remove the gear with the needle bearing.
2. The fixed gear presses harder. The channel is probably shifted more towards it.
3. The channel is probably poorly made because it cuts filament chips. I didn't have these problems with the printed version. This is not a problem with the filament being chewed by the teeth.
4. Not all screws can be properly inserted with a key.
5. It is not p...
FYSETC CNC All Metal Sherpa Mini Extruder High Temperature Resistance Light Weight Kit with 36 Moons Motor for Voron CR-10 Ender
Joseph R.
FilamAtrix almost everything was perfect. The only issue was that the hobby knife blade was too short for the latest revision of the project. They are now designed to be used at full length and don’t have to be cut down to 26mm.
The Stealthburner kit too only had one issue. The wire loom for the lighting was slightly too short. The wires between the bottom two lights are spec’d at 100mm but what I received as only 50mm. I was able to solder an extension to make it work.
As mentioned everything...
FYSETC FilamATrix Stealthburner Toolhead Voron StealthBurner Filament Cutter CW2 Mod for BoxTurtle Upgraded 3D Printer Parts
Bradley S.
The kit is great. Good quality and everything I wanted it to be. The issue was shipping. The product changed tracking numbers in route. After about a month and not able to see any tracking I messaged to ask about it and never got a reply. I actually did a PayPal charge back thinking it wasn’t coming. When it arrived I reversed the chargeback because I wanted to pay for what I got. But if I could have seen the tracking beyond the first 3 days it would have been better. I would have known it was i...
FYSETC Clicky-Clack Fridge Door For Voron 2.4/Trident 350mm
Lividhen
Shipped hours after ordering and arrived 3 days later. Good parts, as another review said the power connecter wont be comming out by its self.
FYSETC Nevermore StealthMax Air Purifier For Voron Printers Promoting A Safer And Healthier Printing Environment Highly Efficient Odor Absorption Purifier 3D Printer Parts For Voron 300mm
Denys
I had to configure proper dst overlays to get the screen working, but at-least it's compatible with Debian Trixie.
Screen doesn't support brightness adjustment although the vendor claims it to be.
Setting "/sys/class/backlight/rpi_backlight/brightness" to any value give no changes.
The only value that works, is "0", which turns off the display.
FYSETC Raspberry Pi 5 inch DSI Touch Screen MIPI LCD V1.1 5 Inch LCD Touch Screen 800 X 480 DSI Display IPS Working With Raspberry Pi5/4B/CM4/3B+/3A+/3B/CM3/CM3+/2B/B+/A+
Kenneth H.
Not using the E4 for its intended purpose. I am using it for an OnStepX telescope controller, for which it is eminently suited. It works like a charm.
FYSETC E4 board with built-in Wi-Fi and Bluetooth 4 pcs TMC2209 240MHz 16M flash 3D printer control board based for 3D printer
Ryan T.
I used this E4 board as the basis for building an OnStep go-to telescope system using an old CG-5 mount.
FYSETC E4 board with built-in Wi-Fi and Bluetooth 4 pcs TMC2209 240MHz 16M flash 3D printer control board based for 3D printer
Joshua B.
Could use instructions but I figured it out and installed it without any problems. Seems to work well. Would recommend.
For Anycubic Kobra 3D Printer Dual Z Axis Upgrade Kit TR8X4 Lead Screw 350MM 42-34 Stepper Motor Y Type Cable For Kobra Upgrade Accessories
Matthew C.
the kit is well organized and looks great. Still finishing my Voron 2.4 and will be starting this build soon.
FYSETC VORON 2.4/Trident Rabbit ERCF V2 Multi-color 8 /12 Color Kits 2.0 Enraged Upgrade Kits Multi Material MMU For Klipper 3D Printer
Mateusz B.
Everything's fine - the only thing that didn't work was my motherboard burned out. I tried to power the Raspberry Pi from the Spider via USB. After a minute, something hissed and I had to buy a different motherboard. Other than that, it's great.
FYSETC Newest version Corexy 3D Printer VORON 2.4 R2 PRO With DSI5 Display CNC Hollow Gantry High Quality Printer
William P.
I Keep this at my workbench all the time. It is so handy to have it to verify fastener sizes and hole sizes for drill bit/heat set selection.
FYSETC 10th Anniversary Souvenir Ruler Practical Ruler For Easy Measurement 3D Printer Accessories
FYSETC ReviewsVisit store