Gritomatic Reviews

John J.

It's handy! Yeah, it's 3D printed plastic, much like MANY things any more, but it brings some nice features to the KME. The ability to use more than 'feel and an eyeball' to set the desired angle is nice. The thickness compensator (if you use multiple stones) took some imagination to use it, but what surprised me the most was the hook for the rod! I'm ALWAYS using that thing! Instructions? That's the reason for Youtube! Recommend it? You bet!

Multi-Function Frame for KME

Donald T.

Just received this yesterday and have installed and used it for a few knives now. Quite an improvement from the original rod. Much much easier to adjust and rock solid. Really does make a difference in the feel and use of the R2. Well worth the investment. Hapstone should make this the standard for all their sharpeners. As usual for Hapstone, no instructions, but it's very easy to figure how to install it. Only takes a couple minutes.

Rail Height Adjuster for Hapstone R2

Jay R.

After reading a lot of reviews, I ordered some hoping that it would work as well as people had described. It might be even better than some of the Sterling reviews that I have read. I sold a CutJack to a friend who left it wet. I took it apart, cleaned it, polished the bearings with the SSM and treated the washers and surrounding areas with gunny glide. It is not perfect but I suspect with another treatment or two it will be good as new. My knives that I have treated with this all have wonderful...

Gunny Glide Graphene Lubricant [15 ml]

Matthew C.Verified

Seems like good stuff. Maybe a little noticably better than your standard generic light oil, but not overwhelmingly so. No odor as far as I can tell (I got the unscented.) Nice little needle applicator on the bottle; makes it easy to get it where you want it. Seems to creep down into tight places and stay there.

Gunny Glide Graphene Lubricant [10 ml]

Chris W.Verified

Nice plate case. Holds both the silicone carbide and the choosara 5 plate sets, and the ruby ceramic and the breeze stone. All 12 fit very well, and are protected.

Roll Bag for Edge Pro stones

David H.Verified

Very nice strop for being so cheap. I wasn’t worried about fancy colors so I bought the cheapest bare aluminum one. I know the colors are so you can color code them by what you have on them but I prefer just bare aluminum and I write on the back with a sharpie what I have on them for easy identification. This particular one I loaded up with gunny juice 1 micron and it worked incredibly in my Edge Pro and put an amazingly polished edge on my Maxamet Para 2.

Cowhide Leather Strop on Anodized Blank [6" x 1"]◽

Paul C.Verified

I’ve used Gunny Juice for the last year since I saw it on YouTube. It is OMHO unquestionably the very best stropping compound on the marker. It is the Magnacut of compounds.

Gunny Juice Poly Diamond Suspension (10 ml)◽

Jacob E.

Works very, very well on OTF knives. It's a great lubricant that definitely quiets down noise and reduces friction. It made my Gen III Combat Troodon way easier to deploy and retract. I recommend it, and hope they continue to produce it to buy again in the future.

Gunny Magic OTF Lube [15 ml]

Shane T.

Love these stones. The whole spectrum of grits just cut better than my others. They just have that “feel”. I own a number of differing brands ( Hapstone, venev, atoma and others from Shapton and CKTG branded). I mainly use Hapstone (cbn & diamond) and poltava. I have decided to go with the full spectrum of poltava to simplify my efforts (not having to reset angles when I switch stone). It’s not that much of an inconvenience but the quality, performance and feel of these stones have convinced me

Poltava Premium Metallic CBN Stone [4" x 1"]

undefined review of Multi-Color Strop Set - Shell Cordovan Leather for Stroppy Stuff [6" x 1"] image 1 out of 1

Youngsoo K.Verified

very good quality. shell cordovan is worth their highprice. I was very satisfied with that👍

Multi-Color Strop Set - Shell Cordovan Leather for Stroppy Stuff [6" x 1"]

Jeffrey K.

Recently upgraded my sharpening system to the Hapstone RS and a set of the Hapstone premium CBN stones. I absolutely love this setup can't say enough good things about it. Build quality seems top notch and the CBN stones are fantastic. Hapstone recommended using their magic oil with the CBN stones and that was a really great recommendation. I also purchased the case for the system and that is also very convenient and high quality if you sharpen infrequently and want to be able to safely stor...

Hapstone Premium CBN Stone [6" x 1"]

John J.

I've got some Venev stones that I was using on my PA with a stone adapter, then landed a KME and tthis adapter was a no brainer. Again, 3D printed plastic (I'd have preferred aluminum) but this seems quite well made and it only needs to hold the stones in use, not mount them somewhere, and through 5 knives and counting, it hasn't slipped once. Plus, it's easy to hold onto in use. I've used it with the KME, Venev Dog and Greater Dog stones without issue. The Greater Dogs were too wide for the KME...

4" Stone Holder for KME

Gary W.

I have all 5 stones and absolutely love them. I have used many diamond stones and in my opinion these beat them all hands down. Have used these on almost all the super steels and they are far superior to any experience I’ve had with diamond stones.

Silicon Carbide Stone Set [4" x 1"]

Cody

The holder holds onto the stones I purchased with aluminum backing plates perfectly HOWEVER it does NOT fit onto the guide rod for my work sharp professional precision adjust. The guide rod is a larger diameter than the hole in the holder. My fault... I should have looked into it a little better. I'm sure this will work very well in the proper sharpener.

6" Stone Holder for Work Sharp Precision Adjust

Steve S.

Wonderful accessory. Great for little tools and tool blades. In conjunction with the L-adapters it is very functional. I do wish it were wider. A small chisel can be centered with the use of the L adapters.

Small Universal Table

R H.

I use this for my scraper plane blades. Achieving an accurate 45 degree bevel has always been a challenge. Prior to this I was using a file in a jig. I can achieve a well polished 45 now and the plane cuts like butter on difficult grain. Do use a square to assure the blade is square to the jig.

Chisel Module

undefined review of TSProf Kadet PRO T Knife Sharpener image 1 out of 1

Eric K.Verified

The base and frame seems solid but what good is it if the main moving part is poorly made The rod needs to be cleaned off with towel every 10 minutes or it will get stuck and the pivot bearing also get stuck and you need to clean it inside and out in order to rotate side to side every 20 to 30 minutes of use The most disappointing thing is the seller The little plastic that stations the rod broke after sharpening 2 knives and i sent email multiple times but the seller didn't bother to reply b...

TSProf Kadet PRO T Knife Sharpener

undefined review of K03 Whole Milled Fillet Clamps image 1 out of 1

Lance S.Verified

Every product purchased from Gritomatic has instant shipping and works flawlessly with my Toohr#3

K03 Whole Milled Fillet Clamps

undefined review of Venev Ursa Series Dual Side Diamond [6" x 0.6"] image 1 out of 1

Bilal H.Verified

Honestly disappointed in the “cut-power” of the 100grit stone. I was so surprised how they weren’t gritty at all. It feel like it would be 1000grit. I tried using it to achieve a burr on my quarter inch knife and doesn’t do it at all. Need a much much much courser stone. Can’t get a burr with it on this knife. Even my smaller EDC knives burr is very minimal

Venev Ursa Series Dual Side Diamond [6" x 0.6"]

Julio Cesar J.Verified

I love this, the original from tsprof is very small and I am a very tall person (194cm) this piece is almost 3 times the size and is very pleasant to the touch

GritoHandle for TSPROF K03 (Large)

undefined review of All-Metal 6" Stone Holder for Work Sharp Precision Adjust image 1 out of 1

Leslie W.Verified

The quality product holds. My stones nicely allows me to get a wicked edge.

All-Metal 6" Stone Holder for Work Sharp Precision Adjust

Brennon A.

Upgraded from a WS-PA to this thing and the difference is night and day. Never going back and I don’t see the need to ever upgrade either, considering the variety of stones it can take. My only complaint, is that some knives that can’t clear the base when switching sides. Reversing the base plate fixes this issues, and I find that it’s still sturdy enough.

Hapstone RS Knife Sharpener

undefined review of Steel Blank for Work Sharp PPA image 1 out of 1

Allen T.Verified

Great blank to use for better stones on the precision pro adjust

Steel Blank for Work Sharp PPA

undefined review of Venev Ursa Series Dual Side Diamond [6" x 0.6"] image 1 out of 3

Creedin C.Verified

Not even near flat. Iknow that these stones aren't advertised as truly flat, but these aren't even close. Also appears to have corrosion all over the mounting plate. This corrosion was not present on my venev cerberus stones for the kme. I emailed gritomatic to try and remedy this, but have not received a response email yet.

Venev Ursa Series Dual Side Diamond [6" x 0.6"]

undefined review of Venev Cerberus Dog Series Dual Side Diamond [4" x 0.6"] image 1 out of 1

Daniel D.Verified

Works great. Best stones out there for the money, and then some.

Venev Cerberus Dog Series Dual Side Diamond [4" x 0.6"]

undefined review of Plywood Storage Case for 6" Stones image 1 out of 1

Tim B.Verified

Super high quality box. Very satisfying positive engagement when closing. Fits all 6“ stones.

Plywood Storage Case for 6" Stones

Keith L.

Excellent stones. Cuts very fast on mid to lower Rockwells. Never tried super steels but keep in mind these are Ao. I have the whole set... so should you! VALUE!

Boride T2 Stone [6" x 1"]

John D.

I've used the 5 stone Silicon Carbide set twice now, on a M390 & a S30V blade. Really pleased with how well they performed. Raised a bur on the S30V with both the 120 grit and the 240 grit in one minute, using my Tsprof Kadet. No sign of dishing. Really impressive results.

Silicon Carbide (5)Stone Set [6" x 1"]◽

Mark S.Verified

I’m very happy with this purchase. It’s well built and should last a lifetime. This machine is accurate and smooth. The stone holder works with all types. Whoever engineered this system got it right.

KakBritva Sylift Plus Knife Sharpener

undefined review of Poltava Premium Metallic CBN Stone [6" x 1"] image 1 out of 1

Youngsoo K.Verified

good quality!

Poltava Premium Metallic CBN Stone [6" x 1"]

Charlie D A.

To be 3d printed and plastic, fits better than I expected, thought it would be loose and sloppy, but it was snug. Using them on TSProp Pioneer, with Hapstone R2 Clamp Adapter for TSProf K03. I would rather for them to be aluminum even If had to pay a little more.

Hapstone R2 Clamp Adapter for TSProf K03