UniFormation 3D Printer Reviews

undefined review of UniFormation 405nm UV Resin Curing Station 10.2'' image 1 out of 1

Christopher B.Verified

Huge area with lots of light. The glass window makes it cool to see the print. Smallest critique, I'd have the plate flat instead of with a lumpy bolt head in the middle of it.

UniFormation 405nm UV Resin Curing Station 10.2’’

undefined review of UniFormation Ultrasonic Resin Cleaner W230 image 1 out of 3

Tim H.

I've been doing this stuff with most of the same companies for over 10 solid years and this is the Tesla of Resin printers - it has run flawlessly for me and my firm for almost a year now. The design and ease is not to be found with any other manufacturer This printer is the easiest and most enjoyable printer I have ever known. I've run mine 12-20 hours a day - just stopping to swap out the tray and build plate - and you are printing again. Using the washing and curing station really helps ...

UniFormation Ultrasonic Resin Cleaner W230

undefined review of UniFormation GKtwo 10.3'' 8K Resin Printer image 1 out of 2

Florin B.Verified

Absolutely love it! I had no experience with a 3D printer and decided based on prior research to go for Uniformation GK Two. The printer itself is very nicely done with all necessary features and accessories in order to start your first print in couple of minutes. Also the materials included on the USB stick were very helpful and as promised you can experience at first hand that the guys were thinking at everithing in order to have the best customer experience. Nicely done and keep up!

UniFormation GKtwo 10.3’’ 8K Resin Printer

Mick P.Verified

This is the 1st Resin Printer I’ve ever used, I am so impressed with the quality of the prints that this machine delivers, and I’ve not dialled in the settings yet, just printed this miniature at the standard resin settings, I would say this is the ideal printer for both the beginner and the professional. If your on the fence to which printer to go for, absolutely go for the GKTwo, you won’t be disappointed .

UniFormation GKtwo 10.3’’ 8K Resin Printer

undefined review of UniFormation 3d Printer kit(GKtwo+W230+D265) image 1 out of 5

Matthew R.Verified

This is my first 3D printer. I researched it a lot Before buying one, I looked at yours and look at reviews. I was going to go for a 9K 3-D printer But your heated bed sold it to me, I love it to bits it is a really good 3-D printer thanks a lot for Making it👍 Matt Read

UniFormation 3d Printer kit(GKtwo+W230+D265)

Bjorn H.Verified

The GKTwo is an excellent piece of hardware. Full stop. As a first time printer, I had been waiting on the overall tech to get to a point where useability wasn't just an exercise in frustration chasing unknown failures. The GKTwo is that machine and I now have two of them. It was just easy to learn and operate, with a feature set that allows me to print all year long (thru winter). Easy change vats, levelling, screen protectors, feps, fuses and filters keep maintenance easy and straightforward...

UniFormation GKtwo 10.3’’ 8K Resin Printer

undefined review of Uniformation Standard Resin for GK3 Ultra image 1 out of 1

Rainer G.Verified

although transparent, 2.5sec of exposition time are sufficient (where other transparent resins need between 4 and 6 sec). Brittle but works fine. Be careful when you remove the supports. Heating them up by a hair dryer before tearing them off makes it more easy.

Uniformation Standard Resin for GK3 Ultra

Alistair B.

Well the GKTwo? What can i say about>? Well firstly let's start from the beginning of my printing story, i started last year with an anycubic mono x 6k, great little thing but it struck an itch i wanted more, something with finer detail and a bigger build plate. So i got myself a saturn 2 everyone raves about them don't they? Well after getting one my troubles started i had no end of issues that i'd never seen with the mono x, just couldn't get the thing to print right or consistently, honestly...

UniFormation GKtwo 10.3’’ 8K Resin Printer

Nikolaj O.

I have been using the GKtwo for over 6 months now, and it has been a purely enjoyable experience. In terms of print quality, it's no better or worse than any other printer with the same resolution. But in my opinion that isn't where it's strength lies anyway. The real strength lies in all the little details which makes the printer easy and enjoyable to use. The build plate, once leveled, will most likely never need to be leveled again. It snaps it place with a latch, and it's impossible to close...

UniFormation GKtwo 10.3’’ 8K Resin Printer

Radek J.Verified

The 3D print went perfectly well on the first try! Someone has finally made the resin printing less of a chore. Great design!

Pre-order UniFormation GKtwo 10.3’’ 8K Resin Printer

David M.Verified

The printer is excellent and having a WIFI dongle is a bonus. I was expecting it to take longer to get here.Thank you

UniFormation GKtwo 10.3’’ 8K Resin Printer

undefined review of GKTWO Air Purifier(6PAC) image 1 out of 1

Waleed H.Verified

I did my firs model and it turned out great, im excited to create many more projects using this machine! Thanks Uniformation team!

GKTWO Air Purifier(6PAC)

Olivier M.Verified

I was really impressived by the sales team follow UP. Very short delivery Time The printer is a pleasure to use. I am fully satisfied

UniFormation GKtwo 10.3’’ 8K Resin Printer

undefined review of Uniformation PLA Plant-Based Resin（X13 Grey） image 1 out of 1

Marcel P.Verified

Prints very well, details are great, and looks really nice even before priming / painting. Like most high detail / standard resins it's quite brittle though, and supports are not as easy to remove compared to more flexible Resins. Will likely use it for decorative figurines, not tabletop miniatures, as it feels much more suited for this purpose.

Uniformation PLA Plant-Based Resin（X13 Grey）

Frank F.Verified

Der Drucker ist Mega gut durchdacht und liefert eine super Druckqualität. Ich habe auch einen Anycubic M5s der kann mit dem gktwo nicht mithalten.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Cayle G.Verified

It prints well, it prints quietly, and the odor is minimized by the design and carbon filter. Still wear a mask, but the mask doesn't have to work as hard. If this thing ever quits or becomes obsolete, its replacement will for 100% certain be Uniformation.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Stefanos K.Verified

I purchased the three pieces of equipment on offer from Uniformation.Perfect delivery packaging. Havent try it yet because im building the working area and filtration system

UniFormation GKtwo 10.3’’ 8K Resin Printer

Edward F.Verified

Printer works awesome... Right out of the box. I have no previous 3d printing experience... But this was a breeze. Quality of prints is amazing. Printing , cleaning and curing are made easy by the uniformation trio of devices.

UniFormation GKtwo 10.3’’ 8K Resin Printer

undefined review of Pre-order Uniformation GK3 Ultra image 1 out of 1

Yann Q.Verified

The machine is great, no big issues so far except a faulty joint plate which cause the build plate to be misaligned but I can print so not a huge issue. I Contacted the support about that but no answers since 1 week. Also the lack of communication about the order was an issue for me. No news about the compensations due to the delay (nfep/screen protection/chitubox pro license). To conclude great product bad communication.

Pre-order Uniformation GK3 Ultra

Brett J.Verified

Love these printers, hands down the best in my opinion. Ease of use, quality and reliability is astounding. These will never let you down.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Alexander W.Verified

2 ltrs down and not a failed print after i had to relevel the bed following delivery. best printer ever

Pre-order UniFormation GKtwo 10.3’’ 8K Resin Printer

Joshua W.Verified

First test print and it’s just about perfect I’m very happy with results setting it up was very easy and I’ve had no problems with anything so far

UniFormation GKtwo 10.3’’ 8K Resin Printer

Paul W.Verified

this has to be the best printer i have owned ,so easy to set up and use and the prints are so crisp and clean. I will never use another brand for my hobby. the customer service is truly amazing as well, so helpful. I can not fault a single thing with my experience and glad to be a part of the uniformation family.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Stephen M.Verified

I made the mistake of underexposing the first print and dented the fep a bit but I cleaned it and figured out where I went wrong. Since then it has been perfect. Any issues have been my lack of knowledge. Great printer!

UniFormation GKtwo 10.3’’ 8K Resin Printer

Paul L.Verified

This is my first printer and I love it. There was a lot to get use to and figure out but the people at Uniformation are great they had no problem helping and walking me through the process James and Mia are the best.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Daniel L.Verified

By far the best Resin printer I've bought so far. The little innovations like the lift-up cover and the build-plate clamp and vat securing action make life so much easier, but of course it's the heater which puts it in another league. That has meant I could use resins which before always produced failures on my Halot Mage. Easy 5 Stars!

UniFormation GKtwo 10.3’’ 8K Resin Printer

Barbara B.Verified

I absolutely love the printer. I set it up, plugged it in, and instantly started to print to test how well it did out of the box. No checking the bed levelling, no checking anything. And it worked perfectly! It's absolutely amazing, and I highly doubt that I'd have been able to do this with any other resin printer currently on the market, and that doesn't cost thousands of €. Well done UniFormation!

UniFormation GKtwo 10.3’’ 8K Resin Printer

undefined review of UniFormation 3d Printer kit(GKtwo+W230+D265) image 1 out of 2

Dave V.Verified

It's my first resin printer and decided to go for the quality of the Uniformation GKTwo and boy do I love it!

UniFormation 3d Printer kit(GKtwo+W230+D265)

Matthew U.Verified

I am 95% fully inlove with it, the packaging quality was beyond and the printer and accessories arrived without damage, even though the outer box was damaged. The print capabilities and quality is second to none, with the vat being clipped in rather than screwed down, the quick release for the build plate. Just a couple of minor additions i would like to make to increase my love for this printer. Firstly the wifi module, i wish this would allow access to a uniformation app that notifies me of pr...

UniFormation GKtwo 10.3’’ 8K Resin Printer

Gustav B.Verified

The perfect printer for a beginner like me. My GKTwo was perfectly leveled out of the box, it's very easy to use and is perfect now during the autumn here in Sweden with the built-in heater. Have not had a single print-failure sofar, and if I will, it's very likely not because of the printer.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Martyn D.Verified

Got the printer, wash station and curing station. All arrived with excellent packaging, and everything just worked straight out the box. Instructions were clear, plenty of helpful videos so setup was a very simple matter. Printed the test print and then moved onto setting up for my resin with some test prints at different exposures. All good. Jumped straight into some minis and a large bust. I've been amazed at the detail of the prints, and the fact.... it just works. So much easier to de...

UniFormation GKtwo 10.3’’ 8K Resin Printer

Carsten S.Verified

This is my first 3D Printer. Unboxing and Setup was easy and without any problems. First testprint came out perfect with the X22 resin. Also the first print of my model. The wash and curing station work also fine. I am very much impressed and absolutely happy with my GK2. There is just one little point: The touch screens at the wash and curing station do not respond when touching with the nitrile protective gloves I wear …. Carsten, Berlin, Germany

UniFormation GKtwo 10.3’’ 8K Resin Printer

Harold A.Verified

The GkTwo printer from Uniformation has pleasantly surprised me. Since I started using it, I've found it to be very user-friendly, even for someone who's not an expert in 3D printing. What I really appreciate is that the prints come out with pretty good quality without needing constant adjustments. It's not the fastest printer out there, but the consistency in the results makes the wait worthwhile. Assembly was straightforward, and the machine feels quite solid. If you're looking for something ...

UniFormation GKtwo 10.3’’ 8K Resin Printer

Paul G.Verified

I had to order a new screen as I stupidly put the FEP bracket with 4 screws on, then forgot to turn it over to put the outer screws in, and of course a vat full of resin ran out everywhere, ruined the LCD screen, ran through the printer, over the bench, just everywhere. It took 2 days to clean properly after taking it to bits, but a new screen was necessary. Screen arrived very well packed, installed in seconds and all working as before. So, just make sure you replace a FEP correctly otherwise i...

Uniformation 10.3in 8K LCD Screen Replacement for GKTWO

Beardy D.Verified

This is, by far and hands down, the best printer I have ever used. So much so that I now have 2 of them. There is nothing I could say of any faults whatsoever. The design and build of this machine are phenomenal, solid and much simpler to use than those of any other brand I have used in the past. I have replaced my other printers with these and I am now looking and hoping to get the only thing that I think could be better than the GKTwo, and that's the GKThree

UniFormation GKtwo 10.3’’ 8K Resin Printer

Armando N.Verified

Your company provides the best quality products and excellent customer support. I’m so impressed with the quick delivery of parts and quality. Whenever I have any questions they always reply to me very quickly. This is an amazing company that has great products and provides help and service after their sale. Very rare to see a company like this.

To make up for the difference in price

Idris R.Verified

Arrived very quick. I can finally start a print and not worry about the temperature. So the mini heaters can be put away( less fuel bills). Only made a couple of prints up to now, have too much work, but in a few weeks will hopefully making a lot of miniatures from myminifactory. I watched a few video's from Fauxhammer so set up and starting to print was easy.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Martin M.Verified

I bought one gk2 in the black Friday sales, after having it for 18 days I bought my second. The machine is great, the heating under the vat is superb and such a difference than having a chamber heater. If I had space for another machine I would get a third.

Pre-order UniFormation GKtwo 10.3’’ 8K Resin Printer

Derek F.Verified

This has to be the ultimate in 3D printing. Easy enough for the novice to pick up almost immediately, to the experienced printer who will appreciate the thinking and workmanship that has gone into this model. If there is one downside I would have to point to the fact that the accessories for the GK Two aren't readily available to us in the U.K.

UniFormation GKtwo 10.3’’ 8K Resin Printer

Marcel P.Verified

First resin printer, and it works like a charm! Very well built, the build plate is big so a lot of stuff can be printed in one go (e.g. ~18 miniatures in 32mm tabletop size, without bases) and the heating system helps a lot to get great results consistently. The one thing I really wish for is a resin dial in functionality, to check several exposure times at the same time. I really would love if Uniformation added this feature in a firmware update, it would make this printer even greater!

Pre-order UniFormation GKtwo 10.3’’ 8K Resin Printer

UniFormation 3D Printer ReviewsMore details