Tinker N.
Love this filament - easy to print nice look when done, even without post processing. Certainly going to become the standard go-to filament for our maker space !
Looking forward to more colours to become available !
Filaments.ca Reviews
Regen PHA Compostable Biobased Filament - Mini Refill Coil - WHITE - 1.75mm - 0.5KG
Steven W.
Works great. Printing with Bambu X1C and Bambu native PLA usually and this is almost an easy dropin replacement. Very little tuning and prints great. Good bed adhesion, good quality prints.
This will be my go to first reach PLA going forward because I love the idea of using recycled PLA and minimizing impact.
Recycled PLA Filament - 1.75mm - 1KG
+1Grégory G.
Best filament I’ve used so far! I have had great results using this one. Moreover, it is a very good thing that it has this level of quality using recycled material!
Recycled PLA Filament - 1.75mm - 1KG
Hoda G.
I made a video for my students on how to use 3d printing with Revit software, using your products. If it is of any help to you, please feel free to check the link:
https://www.youtube.com/watch?v=-7q3PjH2_7I&list=PLnQTukI1DJvy603TD2Uq2qG8esRdKlzNY&index=7
Thank you,
Hoda
[email protected]
EconoFil™ Standard PLA Filament - Black - 1.75mm - 1 KG
Clayton O.
This filament performs as well as we have come to expect for any of the Filaments.ca Econofil-PLA, which is great! Easy to work with, cardboard spool, and all the good stuff.
This skin tone works well for medical procedure trainers with minimal effort to match silicone coloring.
10/10
EconoFil™ Standard PLA Filament - Light Skin Tone - 1.75mm - 1 KG
Rob S.
Wet sanding with 320 grit gave me a very good finish. Looks like I need to use a smaller line width to get it to be clear. This is .4mm.
TRUE Food Safe PLA - Water Natural - 1.75mm - 1 KG
Sterling S.
I am enjoying this material after the learning curve of ensuring proper bed adhesion. This Wood PHA prints with a lovely wood-smell, however the smell does not linger in printer parts. This wood-fill also results in smooth parts unlike other types that result in a matte finish.
Nozzle Temp: 195 [C]
Bed Temp: 40 [C], first layer only (although I have been reading no heating may be beneficial?)
Bed type: textured PEI build sheet.
Bed adhesive: PVA glue with fresh and gene...
Regen PHA Compostable Biobased Filament - WOOD - 1.75mm - 0.75KG
Louis D.
Been using a lot of the home brand low cost PLA from Filaments.ca. Several months ago, Filaments.ca decided to skip on the cardboard boxes - to reduce costs I assume. But didn't change how they were packing rolls for shipping. Without their protective boxes and sufficient packing, I received 3 shipments with damaged items. I usually order 8-10 rolls at a time.
Thankfully, the individual boxes are back and the quality of the products getting to me is also back up to the original standards... Pro...
EconoFil™ Standard PLA Filament - Milk White - 1.75mm - 1 KG
Marc-antoine D.
EconoFil is my go-to filament and this Silver one is as good as the others I've tried. The modular paint shelf in the picture (Painter's Fortress kickstarter) was printed entirely using this filament with nozzles of 0.2mm, 0.4mm and 0.6mm without any issue.
EconoFil™ Standard PLA Filament - Silver - 1.75mm - 1 KG
Terry P.
Fantastic filament prints easy and smooth no problems at all I'm not an expert but I'm getting there but everything prints beautiful I would recommend this filament to everyone printing it's great to use great results
EconoFil™ Standard PLA Filament - Medium Grey - 1.75mm - 1 KG
Daniel C.
Really like this filament, the CPE content remove the brittle component of PC+. I can smash 2 identical part together and the PC CPE from Filament.ca will not break while a PC+ part will be destroyed. Rigidity is still the same.
This is perfect for my application of tin wall at 0.4mm, light weight wings. Wing surface is very smooth. I print on a Creality CR10 Smart Pro at 270C hot end and 100C PEI plate. It stick very well to PEI, let it cool down and remove.
+-
Easy PC CPE Filament - NATURAL - 1.75mm - 1 KG
Marco F.
This Gloop stuff is every bit as great as they advertise. It’s not your average adhesive. It contains methylene chloride, which amongst other things, melts plastic forming a super-strong bond. It does take a little while to bond, so make sure you have a plan. If your parts are large, I suggest using pegs to ensure the parts are lined up. Use clamps if the parts are small enough. For my helmet, I used my belt. It does have a strong smell, so use it in a well ventilated area. Gloves, eye protectio...
3D Gloop! - PET GLOOP - Adhesive for 3D Prints
Kerith P.
The PLA Pro material is by far the best choice for our production and the 4Kg spool means we don't end up with a bunch of waste at the end of a 1Kg spool.
PLA PRO (Tough/High Impact) Filament - BLACK - 1.75mm - 4KG
Kevin L.
I bought the blue/grey as part of a 6 roll purchase, I haven't done a lot with it just yet but added 2 of the prints I have used it for, the filament prints clean with little to no stringing, color is consistent and the filament lays down evenly. Printing on an Ender 3 pro with the magnetic mat, extruder is set to 205 and the table is at 60, I clean the mat with alcohol and I have no adhesion issues. I am very happy with the Econofil line of filaments.
EconoFil™ Standard PLA Filament - Blue Grey - 1.75mm - 1 KG
Kevin L.
I quite enjoyed this filament, I bought 6 spools of various colors of the econo brand for a first time buy, the free shipping encouraged me to try it. I am pleased with the result, the filament prints smooth with little to no stringing and gives a smooth even color finish. I run my extruder at 205 and the bed at 60, my printer is an Ender 3 pro with the magnetic mat on the bed. I wipe the mat down with alcohol and I have no problem with adhesion.
EconoFil™ Standard PLA Filament - Neon Coral Orange - 1.75mm - 1 KG
Richard T.
Ce filament est vraiment très bien, facile à imprimer on peut facilement fabriquer des objets qui demandent des propriétés mécaniques. Ajustement de mon imprimante: Prusa i3 MK3, nozzle à 235 et bed à 70 sur une plaque PEI. Le résultat est parfait à chaque fois. Peux importe la couleur que vous choisirez dans la gamme ProPLA, les résultats sont toujours parfait. Je le recommande.
PLA PRO (Tough/High Impact) Filament - Low Gloss BLACK - 1.75mm - 1KG
Robb M.
Using for cookie cutters and a couple kitchen gadgets. Worked great. 200 was a little stringy and had some under extrusion. 205 did the trick. First roll printed great, about to start the 2nd roll.
TRUE Food Safe PLA - Pink Dragonfruit - 1.75mm - 1 KG
Richard T.
This filament in very easy to print. My set up is: nozzle at 235 and bed at 70 with with a PEI surface. I print with Prusa i3 MK3+. The parts are strong and are a very good look.
PLA PRO (Tough/High Impact) Filament - Low Gloss BLACK - 1.75mm - 1KG
Paula H.
I've been printing over 6 years now. Eco-Fil filament from filaments.ca is by far my favourite. Great colours and consistently good filament. I like this Magenta Colour - perfect for my Ms.Pac-Man sign. Yellow and Black are also Eco-fil PLA brand.
EconoFil™ Standard PLA Filament - Magenta - 1.75mm - 1 KG
Gordon R.
Printed very nice cannot see the layer lines and the layers adhesion is very strong just a little problem with sticking to the bed.
I tried with and without heated bed and with glue stick.
I found the best method was a brim this worked very well for me.
My printer is a Qidi xcf-pro which I purchased from filament. ca and every print comes out excellent.
Elastomer TPE - 85A - Filament - Orange - 1.75mm - 0.5 KG
Jacynthe H.
Econofil is by far the BEST PLA I have ever printed with. I was introduced to it via Filabox and fell in love with the quality of the roll. I was able to do multiple filament switches as well as use an entire roll without a single clog, adhesion issue or stringing. I didn’t even need to print filament test tower to test it! It was successful on my first print. I love the huge selection of colours and am looking forward to completing my colour collection. A+ and highly recommended.
EconoFil™ Standard PLA Filament - Dark Purple - 1.75mm - 1 KG
Emma G.
I was so close to finishing my 3D-printed airframe for my fixed-wing plane when my other filament ran out! I ordered this with stifled expectations only to be pleasantly surprised by the quality. I've now finished my plane by the deadline, and in part due to the timeliness and quality of this order being up to par.
ColorFabb TOUGH PLA - White - 1.75mm - 0.75 KG
Steve V.
I am always hesitant to provide reviews on your products because I don't want more people find you. The spools I've purchased for the last several years have never disappointed me and are as high a quality as anything I can get through the online big box stores. I highly recommend all your products but please don't tell anyone until I've placed my next order.
ABS Filament - LIGHT GREY - 1.75mm - 2 KG
Leon F.
When I first opened the package, I was a little concerned as the silk gold appeared more of a dull yellow but as you can see, my fears were unfounded. My gold dragon has plenty of shine and printed without issues of any kind. (first few layers are red).
Very reasonable price on filament made in Canada. I order quite a bit of PLA and PETG from filaments.ca and am never disappointed.
EconoFil™ Standard PLA Filament - SILK GOLD - 1.75mm - 1 KG
Clayton O.
I like flat black filaments more than gloss. I didn't expect this filament to be so wonderfully matte finished, but it is! The picture shows, from bottom to top: 3DPrintingCanada standard black (bottom) , Filaments.ca Canadian Maker Tough Low Sheen black (middle), and Filaments.ca Econofil Black (top). This filament also produced the least stringing and most consistent strength in layer adhesion when no extra steps were taken and printed at 210C.
I'll definitely be making this my standard fla...
EconoFil™ Standard PLA Filament - Black - 1.75mm - 1 KG
William O.
This was the first Big print I did!
And it turned out wonderfully.
The Filament was what i wanted!
It looks like real wood!
and when I sand it,
it will look even more wonderful!
Regen PHA Compostable Biobased Filament - WOOD - 1.75mm - 0.75KG
Brad L.
I find PC takes a few trials to get set up properly. Once you have it dialed in to your printer, its prints wonderfully, and the parts are much stronger than PLA
Easy PC CPE Filament - BLACK - 2.85mm - 1 KG
Bradley B.
Great product, making a full armor set for Boba Fett, needed lots of filament, 4kg rolls are the way to go, set it and forget it! Will be buying more!
EconoFil™ Standard PLA Filament - Medium Grey - 1.75mm - 4 KG
Jacob B.
Prints great, with a deep gold lustre. There's a beautiful shine which creates a convincing gold effect overall, although if you look very closely, the reflection comes from the inside so it's somewhere between amber gemstone and gold metal. Either way it plays beautifully with the light, and it's definitely a good pick for making stage props, crowns, chains, or other items meant to look like they're made of gold. You do have to pay attention to the temperature when printing; if it's too hot, it...
PolyLite™ PLA - Silk Gold - 1.75mm - 1KG
Richard T.
Ce filament est facile à imprimer, il est résistant et peu très bien servir pour des pièces mécaniques. J'imprime le filament avec une Prusa i3 MK3+, la buse à 235 et le lit à 70 sur une plaque de PEI. Les résultats sont parfaits à chaque impression. Je vous le recommande sans hésitation.
PLA PRO (Tough/High Impact) Filament - Low Gloss BLACK - 1.75mm - 1KG
Pierre B.
The filament print great at 190°C on my E3D V6 with good adhesion on the printed bed. It looks like the good quality PLA I've printed before. I'm very happy to print with recycled material.
ReForm Recycled PLA - BLACK - 2.85mm
Jean-francois C.
Amazing material, very flexible and can produce detailed parts. I had to modify my ENDER 3 with a direct drive kit, because this filament is way too flexible and would not print more than one or two layers without blocking in the extruder. With direct drive and not using retraction I now have a very high success rate. Bed adhesion is tricky, but nothing that can't be fixed by playing around. Made some amazing miniature car tires with this material. Will buy again!
Elastomer TPE Filament - BLACK - 1.75mm
Jeremy B.
My first time using CPE HG100 and love this colour so much I did a whole Prusa mini. Material handles over hangs and bridging very well. One of my new go to favourites and of course it was stellar quality as always from Fillamentum!
CPE HG100 - Mistake Blue Metallic - 1.75mm
Fred G.
Great product. Don't know what it is made of but it gives my print head the enema it needs from time to time. On my Prusa I just load and unload the filament. Seems to do the job just doing that.
PURGE Cleaning Filament - 1.75mm
Kevin S.
Just perfect !
If you follow the instructions and recommendations, this machine work perfectly. All is really clear and usually step by step, read the screen and do what you have to do
Raise3D E2 IDEX (Independent Dual Extruders) 3D Printer
Carl H.
Took a little bit of tuning it's a little different then the other types of pla but once I got it dailed in it printed amazing and very tough to test the strength I dropped pieces that I printed about 7 feet off the floor in different directions and they never broke it's so good I bought 3 more rolls.
KODAK PLA TOUGH 3D Printer Filament
Jeremy B.
This PET-G 2.0 is a very interesting material, the natural colour is almost pearl like. For me this material allowed my printed parts to have some give or flex while still maintaining & returning to there rigid forms. Printed at 220-225c (50c bed) @ 50mm/s with 3.5mm retraction. Much easier to work with than previous PET-G’s I’ve tried.
Filaments.ca PETG (Gen 2) - Test Spool
Dan M.
Purchased 8 rolls to get the free shipping. I was worried as I'd never tried this filament before but wow this filament prints amazingly well for any price let alone 16.95 a roll. Planning to order another 8 soon.
EconoFil™ Standard PLA Filament 1KG - Grey - 1.75mm
Jason Z.
Adheres a little too well to heated PEI bed surface. Had to drop bed temps substantially compared to normal PLA. Good problem to have.
Color is a good black. I would say as low sheen as other PLA+, I would have liked even more matte finish, but it's not shiny at any rate.
Prints nice and seems to be very tough.
Canadian Maker Series - Low Sheen TOUGH PLA - Black - 1.75mm
Filaments.ca ReviewsMore details