David H.
Very nice piece lots of adjustments. The old one looks like a kid made it and it broke somehow 😳
Vegas Carts & Performance ReviewsSee store reviews
EZGO Big Block V-Twin Conversion Cradle & Motor Mount
Paul N.
This upgrade is awesome!! The parts fit well and the online installation guide is pretty much spot on. I got the wiring harness and that made this a plug and play installation.
Great power, 36 MPH and pulls the 14” tires of the ground!! Nice!!!
625cc 23HP Big Block Engine Upgrade Kit for 1994-2008 EZGO TXT / Medalist / Workhorse
Robert C.
Great company and great experience! Prompt and courteous! Will definitely use them again in the future and recommend to anyone. One part was damaged during shipment but made a call and received a new one within a week. Great company!!
85mm Analog Tach for Predator/212/420/670/Clone 0-8000 Tachometer
Tim B.
This picture doesn't show the key switch but I'm going to put it in the stock location down by the forward and reverse lever I have a couple suggestions but it is one of the best switches I have seen
Wiring Harness w/Keyswitch & Mount for HF Predator 670cc V-Twin
Adam D.
My yamahammer Golf cart would barely make it up the ramp on my trailer with old 11hp motor. Repowered with the 625 and No more worries about making enough power . Hit the pedal now let the Yamaha cart step out side ways will put a smile on my face every time. Thanks guys at Vegas carts ! Great tech support as well !
625cc 23HP Big Block Engine Upgrade Kit for 1996 - 2005.5 Yamaha G16/G22
Steve B.
Got a bad tach, and sent it in. They replaced it with this really nice one with hour meter.
Lights up nice, mount is really sturdy. Can’t go wrong with this tach.
85mm Analog Tach for Predator/212/420/670/Clone 0-8000 Tachometer
John B.
I blew up the motor in my golf cart. It was a Duromax. I could have replaced it but, I saw the motor that Vegas Carts offers. Bought it installed it and this motor rocks. I have the fastest golf cart in Colonial Beach. I don't stretch it out much put it's got pep. I can keep up with traffic. Thank you Vegas Carts.
EZGO Oversize Drive Belt for V-Twin Engine Swaps
Tim B.
Dog Bones are great but one thing I can say is if Aaron thinks your work is nice he goes above and beyond trying to make stuff work I still need a clutch and exhaust wait until the rest of the Vision X lights are on and I'm shooting for 50 mph any comments?
Engine Hold Downs
John M.
The tac is a important part of the install I like the fact that you can set it a determined rpm so it will flash when you achieve 4000 rpm protecting your engine
85mm Analog Tach for Predator/212/420/670/Clone 0-8000 Tachometer
Robert M.
Everything was made well. The quality of the parts exceeded expectation. The 5 wire ignition only came with a 4 wire cable and that is a bit of a problem.
Wiring Harness w/Keyswitch & Mount for HF Predator
Eric S.
Exactly what I needed when swapping out my blown VTwin to the new hd harbor freight 459cc in a pinch. Love this motor even more than my beat 670
50" Replacement Drive Belt
Mike A.
My 8 hp ezgo now has 22 hp pep. I don’t have to worry about crossing a street. It was about a $2600.00 conversion but I would do it again. Thank you Vegas carts!
9ft Wiring Harness w/Keyswitch & Mount for HF Predator
Jose L.
The original Robin 350 blew in my 07' EZgo ST 350. The cart had been very useful around the farm and I knew I needed to fix it or replace it. I decided an engine swap was the cheapest route as I did not want to buy a whole new cart. Do yourself a favor and buy this kit. It was easier to install the kit and engine than it was to remove the old engine. If you're thinking of building a cradle and kit yourself, don't even bother. There are parts in this kit that let you know they thought of everythi...
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Bruce P.
Vegas Carts had the info on their web site about which belt fit the club car predator 420 conversion. Since I made my own motor mount I waited until my 15/16 clutch arrived from them to take measurements and sure enough it was the 42" belt. I will be purchasing more items from them as they have already figured out things I am learning in hindsight from this conversion. I have already reviewed the clutch which works great with the belt.
42" x 15/16" Drive Belt for Club Car
Daniel B.
Please don't try to fabric your own, this kit is the rats a&&. I'm in the process of front alignment and little items to finish it up. Photos will come after. People save yourself the headache and order your kit. Well built looks mean and not one problem. Simple directions. Thank you for a very well built and great looking product. Dan from Ohio.
Predator 22hp Installation Kit for 1986-1996 Club Car DS
Daniel B.
Again your crew is amazing. I have the HF. predator 22hp. Simple as unplug a wire and plug one in. Directions are on point. Your company and crew are on point. Thank you , Dan from Ohio
9ft Wiring Harness w/Keyswitch & Mount for HF Predator
Alex T.
The Vegas Preditor install kit was excellent , buying the ignition switch with harness almost makes it plug and play.
This can be proformed with simple hand tools, the drive and driven clutch spring upgrade was simple,if you dont own or have the proper tools to do this part just call you local machine shop, it only takes minutes.
9ft Wiring Harness w/Keyswitch & Mount for HF Predator
Greg A.
I bought a big block v twin conversion kit from you guys a couple of years ago for a 2001 ergo txt. This is the second 47 in belt i got for that kit. Everything was great. Will by from you guys again.
47" Replacement Drive Belt
R David M.
Easy to install (as long as you use the right instruction sheet). Staff was great to work with me when I was having issues as I had downloaded the wrong set of installation instructions.
Wiring Harness w/Keyswitch & Mount for HF Predator
Timothy D.
Very good experience with the parts I received from Vegas Carts, arrived on the date was told would arrive, no damage, and the correct parts to complete my project. Only thing is I wish that there was a rod to attach to governor linkage, used a bent coat hangar to control rpm’s . But otherwise was an easy install. Thanks Vegas Carts, I will do business with you in future for all my cart parts.
Predator 22hp Installation Kit for 1999+ EZ-GO Workhorse ST480
Tomas S.
It came much faster than expected and it all looks very good. These parts will be easy to assemble with my new engine, (when I got the time).
thanks Vegas Carts
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Doug A.
this kit is awesome everything just bolted in, I didn't use the air cleaner that came with the kit because in I needed to use the choke so I made a bolt on piece to use a round filter.
Predator 459cc & 420cc Install Kit for 1985 - 1996 Yamaha G2/G9/G14
Stuart W.
Its a great addition to the conversion kit for Predator 670 motor with dual cables . Only issue I had with it is that it doesnt come with the springs and new cup washers or the metric nuts to retain the springs. I lost mine after my original cables broke a few years back and had a makeshift shifter apperatus . You cant find the springs cup washers or metric nuts hardware anywhere on line .I found 1 place that sold the springs and had to find the right 5mm nuts and cup washers at the local ha...
Extended Shift Cables (F&R) for Lifted 1995-2001 EZGO TXT & Medalist
Jimmy M.
Instructions was spot on easy install. Worked perfectly and would recommend to a friend and would purchase again. Only thing I would suggest for you to add to the kit is a way to hook up the choke.
Predator 420cc Install Kit for 1994-2008 EZGO TXT & Medalist
Jarry R.
After trying to fabricate something that would work to no avail I ordered the bracket. 20 minutes later everything in alignment, nothing was in the way or rubbing. Very good product. Will definitely keep doing business with Vegas Carts.
86-96 Club Car Adjustable GX390/Clone Motor Mount
Ronny M.
Easy peasy, I pride myself in fabrication I needless to say I have had my hands on endless golfcarts and I have always wired the keyswitch myself wire by wire which can be time consuming. I came across this harness and I can say with all certainty there is no easier way it is the definition of dummy proof takes about 30mins to install and you are good to go and the shipping was very fast. Thanks VegasCarts.
Wiring Harness w/Keyswitch & Mount for HF Predator[9ft (Standard Length Cart)]
Randi D.
Another excellent purchase, saved $50 with their discounted items, a few very minute scratches that no one will ever see anyways... very happy with the product and purchase... a tip on Installing the rod, there is a rib on the front of the block that will need notched or cut off for the rod bolt to clear..I found this out after torquing the rod bolts so I just snipped it off to prevent disassembling the engine again and having grinding dust to wash out... laziness on my end but it's just cosme...
4.41" Billet Connecting Rod (LESS THAN PERFECT)
Scott H.
Very easy to install and it works great. Just know if you have the 4-wire harness you will have to figure out where to get power for the carb solenoid or remove the plunger to get the engine to run. Otherwise a great time saveer and after a couple of trips to the range I like the new key location.
Wiring Harness w/Keyswitch & Mount for HF Predator
Scott H.
This kit is really well thoughtout and most everything is self explanatory as far as the install goes. The only real improvements I have made are replacing the washers on the motor mounts to some that are thicker and dont bend when tightened down. I actually removed the swingarm and installed the new one in less than 3 hours. Installed the new engine in a few minutes, but could not get it running becuase I was sent the 4 wire instaed of the 5 wire harness. No big deal once I figured out it would...
Predator 22hp Installation Kit for 1996-2006 Yamaha Golf Carts
Mike B.
product was as described and it was well made and put together the key turn is solid not mushy all the connectors and wire colors were easily identifiable, I would buy this product again
Wiring Harness w/Keyswitch & Mount for HF Predator
Steven W.
This clutch is great! I think I could pull a train uphill! The only complaint is that the machining was still razor sharp and I had to sand the edges to prevent belt damage. Didn't take much effort but it had to be done.
7" Low-Profile Primary Drive Clutch (780)
William B.
Hello , I have a club car ds 1987 , I wanted more power , vanguard 23 and a home made header , would not have been possible if not for the mounting plate by vegas carts . Thanks Guys . Bill
86-96 Club Car V-Twin Conversion Motor Mount
Mike K.
The change over was fairly easy for a weekend do it yourselfer
There were a few modifications that had to be made but were minor and mostly routine.
Cart runs well need to hook up a cable choke so I don’t have to lift seat to start.
So far so good was a good swap and happy with performance of engine!!
Caminomike
Predator 13hp Installation Kit for 1994-2008 EZGO TXT & Medalist
Derek V.
Haven’t driven my cart with the new secondary clutch yet , I’m sure it will be great and look forward to it ! When installing this in my G14 I had to file the key way bigger to fit the half moon kit , kind of a bummer . Also had to punch three of the bolt holes thru on the Casting of the inner plate.
Yamaha G2-G22 Driven (Secondary) Clutch
Donald D.
Had an issue with the intake side pushrod popping out of the stock rocker arm,installed these bad boys and took care of the issue. Very happy with the product
"Champion" HD Shaft Rockers for GX200 & 212cc 6.5hp Clones
Pete S.
Nice work Vegas Carts! Turned my cart into a beast. Sounds good and goes fast! Tons of torque. Wheelies are awesome! Thanks for the simple install and online instructions. 100% satisfied!
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
Jason T.
The CV Tech drive clutch is a high quality piece, and it fits up nicely to the 440cc engine I purchased for my EZGO TXT. Will upload photos when I finish the swap. Currently waiting on last piece of the puzzle, the starter/generator pulley that sits behind the drive clutch next to engine.
7-1/4" Heavy Duty Primary Drive Clutch (CVTech Series 06)
James E.
This predator 22 conversion kit is the best kit of any kind i have installed. I have a Professional Automotive restoration and repair shop so I'm very familiar with the so called direct fit products on the market. My guys have spent hours trying to make direct fit parts and kits really fit and look nice. Take my word this conversion from Vegas Carts is top notch in installation,quality,and looks like it belongs there. Be sure to purchase the extended wire harness to put ignition switch on the st...
Predator 22hp Installation Kit for 1994-2008 EZ-GO TXT / Medalist / Workhorse
John C.
Clean easy install, works great with my Cushman Truckster and 670 predator motor, fixed all of my run on issues that I had with every other ignition switch I tried.
Wiring Harness w/Keyswitch & Mount for HF Predator 670cc V-Twin
William B.
Went in as expected sturdy product little bit of figuring out, but got it done runs great
Predator 459cc & 420cc Install Kit for 1994-2008 EZGO TXT & Medalist
Vegas Carts & Performance ReviewsVisit store