Oscar Delta Co. Reviews

undefined review of BX-1 10/22 Mag Coupler image 1 out of 1

Timothy T.

Love the product, while I haven’t used it, I have put my mags in the coupler to check it out. It’s a tight fit so make sure you push hard to get them in. I haven’t tried to separate them from it yet but I’m sure it will come apart fine. Great idea, I didn’t like the long 15 and 25 round mags so this was right up my alley. Will be able to reload one msg while walking and hunting while having a mag chambered. Thanks again!

BX-1 10/22 Mag Coupler

undefined review of MP5 Mag Coupler image 1 out of 1

Tatsunosuke T.

Works as described. Able to carry a spare mag for quick reloading. A bargain for the price compared to the factory HK part. I’m sure these will hold up just fine.

MP5 Mag Coupler

undefined review of Glock PMAG Extended Base Plate image 1 out of 1

Wess P.

Great addition to the pmags. They slide in and secure nicely. The addition of these extention give the user more surface area to grab when reloading or stripping from the gun.

Glock PMAG Extended Base Plate

undefined review of KUSA KP-9 Mag Coupler image 1 out of 1

Derek

Simple and easy setup! Now I hope you guys can make one that will work with the PufGun mags also, just a simple mod and it will work with both mags.

KUSA KP-9 Mag Coupler

undefined review of CZ Scorpion Mag Coupler image 1 out of 1

James W.

I coupled 2 of the factory AKV mags from Palmetto State Armory which are fitted as standard scorpion mags. Works great for off brand Scorp' mags. They fit snuggly as advertised. Great buy!

CZ Scorpion Mag Coupler

undefined review of PCC Wall Mount image 1 out of 1

Anthony D.

Loved it right out of the package, but I did have to take sand paper and smooth it out a but to slide on and off easier, I'll just chalk that up as different pcc's are all a little different but went on for my application with ease, thanks

PCC Wall Mount

undefined review of Glock Mag Coupler (9mm/.40) image 1 out of 3

Orlando C.

Material is great. Fits perfect for my Glock mags. No movement. I wanted to post the actual magazine installed. For reference of those who need a magazine clamp for Glock. Space between magazines is just perfect for my use.

Glock Mag Coupler (9mm/.40)

undefined review of Glock Mag Coupler (10mm/.45) image 1 out of 1

Bones M.

You guys have nailed it ! Now I can compete against high capacity 9mm shooters. It's tough being the old man with 45acp in a land of 9mm. Great product, well constructed, easy to install. OD I will spread the word. Hell , might order a few more . 😎🎯 BONES

Glock Mag Coupler (10mm/.45)

undefined review of MP5 Mag Coupler image 1 out of 4

Dan M.

I purchased a few different magazine clamps from different companies. Oscar Delta mag couplers were head and shoulders above the rest. As soon as I buy more magazines, I will buy more magazine couplers but only from Oscar Delta. Their prices are extremely fair & the shipping they charge is very low compared to the competition. Oscar Delta is a great company that you can trust.

MP5 Mag Coupler

Cody S.

If you own GL9 pmags then you know the annoying rattle of the base plates. The Oscar Delta extended base plates are worth it just for that but they look good and fit great too, not to mention the cost difference of a pmag to factory glock mags with a base plate. My only hope is they release weighted option in the future!

Glock PMAG Extended Base Plate

undefined review of Glock Mag Coupler (9mm/.40) image 1 out of 1

Josh K.

Great quality, solid feel, and holds the mags without any slippages. Perfect for what it’s made to do, only dislike is it’s a bit wider than I would like. It can easily cut down the gap between magazines in 1/2 and still have plenty of space from the lower without hitting or catching anything. If they made a slimmer option I would prefer that to keep it more form fitting and not too wide since my rifle setup is slim and ergonomic. Also it would allow the coupled magazines to fit in a mag pouch i...

Glock Mag Coupler (9mm/.40)

undefined review of Glock PMAG Extended Base Plate (+0) image 1 out of 1

Norm K.

I’m quite impressed - the base plates fit flawlessly, look great, and add grip and length to the mags. They are nice and light as they are hollow and have the scallops on the sides, but are quite solid and strong. A nice addition to the mags, and Canadian made too!

Glock PMAG Extended Base Plate (+0)

John R.

Absolutely love these things for my pcc setup compact load out for my get home bag . Made of good quality materials and I like the overall craftsmanship. makes for more positive feel when reloading And also adds a wicked look in my opinion. Second purchase and will definitely be purchasing more .

Glock Mag Coupler (9mm/.40)

undefined review of SIG MPX Mag Coupler image 1 out of 1

Ian G.

Incredibly simple and very effective! Easy install, hold is rock solid. This was my first purchase with OD and I'll be back.

SIG MPX Mag Coupler

undefined review of GSG-16 Mag Coupler image 1 out of 3

Steven B.

Always wanted one of these, now I’ I’ve got one! Just remember not to tighten the coupler too much, otherwise you’re good to go!!

GSG-16 Mag Coupler

undefined review of MP5 Mag Coupler image 1 out of 3

Carlos A.

Nice clean look to my AP. Definitely a faster way to switch mags and, get straight to shooting. Love it!!!

MP5 Mag Coupler

undefined review of M-LOK Match Saver image 1 out of 1

Kevin E.

Easy install, recommend a drop of blue loc-tite. Round sweeps right to chamber, but is held firmly until needed.

M-LOK Match Saver

Armand R.

Works well. Extremely fast round in the chamber. Sizing tolerances are perfect. Love the product. Fast international postage. Thanks pepes.

M-LOK Match Saver

Sebastian L.

I added the M-Lock to my Beretta 1301 and it fits perfectly! The shells it holds are nice and snug!

M-LOK Match Saver

undefined review of B&T MP9/TP9/APC9/GHM9 Mag Coupler image 1 out of 1

Jeffrey G.

I wasn’t so sure about it at first. Even though I read the reviews and most of everyone said it was pretty solid. I’m happy. Very happy.

B&T MP9/TP9/APC9/GHM9 Mag Coupler

Brandon P.

Works perfectly on my Briley M2 handguard. Holds an extra shell securely and works as intended. Great value for the cost!

M-LOK Match Saver

Cody M.

Great coupler, but don't hold your breath on shipping. That was my only negative thing to say, took 3 weeks to get.

Glock Mag Coupler (9mm/.40)

undefined review of PCC Mag Coupler image 1 out of 2

Cody S.

Amazing product , so much better than I was expecting. I am going to order another . Very happy and I would definitely recommend.

PCC Mag Coupler

undefined review of FX-9 Blast Deflector V3 image 1 out of 1

Luan G.

The product it’s great. It is a must have if you’re a left hand shooter. Also, the customer service provided was outstanding! I will definitely buy more from them.

FX-9 Blast Deflector V3

Grant K.

These mag base plates are a great way to get into competition (or add a little flair to your gun) without breaking the bank. They fit perfectly on my Magpul GL9 mags and made for fast mag changes. I had a little hiccup with one that was defective and the team at Oscar Delta went above and beyond to make it right. Their customer service was exemplary. Will definitely be checking out the rest of their product line.

Glock PMAG Extended Base Plate (+0)

undefined review of M-LOK Match Saver image 1 out of 2

Darrell L.

The quality looks pretty good and feels like a strong part. Mlok lugs fit very snug. It may be due to my handguard but I wish the match saver is tilted up in the back to aid with bringing the shell into the chamber. Shells fit snugly, but because I don't have experience with other match savers I don't know if it's too tight or not. Overall pretty happy with the purchase

M-LOK Match Saver

Thomas K.

Exactly what I was looking for to fit the Midwest Industries Benelli M4 Handguard! Very nicely made. Quick, easy and solid install.

M-LOK Match Saver

undefined review of CZ Scorpion Mag Coupler image 1 out of 2

Thomas C.

I purchased these a week ago. They work exactly as described. They are strong and sturdy. I’ll probably be purchasing more products from them. TC

CZ Scorpion Mag Coupler

Brett C.

The M-LOK Match Saver is an excellent single shell loader for a shotgun. I tested it out at the range and it not only held the shell in while enduring recoil, but it was easy to slide the shell out and drop it into the chamber for a quick follow up shot. The only problem I had with the product is the sharp edges where my fingers are going to be when slipping the shell out. I had to take a file and some sandpaper to round and smooth them out to make it more comfortable and not cut myself. Aside f...

M-LOK Match Saver

Charles F.

I am very happy with this purchase. The couplers are a bit too wide, but I assume that is because the couplers are made for 9mm, whereas my MP5 is chambered in 22lr. nonetheless they still work great! easy to set up, and they look cool as hell! They also arrived a whole week before the expected arrival date, so thats a huge W.

MP5 Mag Coupler

undefined review of LS111IR image 1 out of 1

Justin N.

Nice little units. Designed for pistols, but honestly just as good on a compact light weight rifle build. Good value for money and nice and compact.

LS111IR

Franklin C.

I don't have my Briley Mlok handguard yet so I can't test it out, but the manufacturing of the product is very clean. Part is 3d printed, but the resolution of the product is very high. Took me a moment and a very close look to realize it was 3d printed and not injection molded. Very stiff with little to no play in the part itself. Only other matchsaver I can compare it with, is a Roth Performance matchsaver. RP saver is injection molded plastic, but the opening on it is way to small/way too ti...

M-LOK Match Saver

undefined review of GSG-16 Mag Coupler image 1 out of 1

Marcus A.

Looks great! Very easy to install and feels really solid. I haven't shoot it yet but so far so good.

GSG-16 Mag Coupler

Derrick J.

Simple and easy to install! I love having one extra shell available. Holds the shell in place with zero wiggle.

M-LOK Match Saver

Sean W.

This coupler is everything you ever wanted when it comes to high volume ammunition magazines. This makes the "drum" look dated. I have 68 rounds on the ready with factory Glock magazines which do not fail like the drums do. The drums have not been perfected but the coupler allows you to 2 33round magazines Together and it shoots every single time When you receive the coupler remember absolutely 100% DO NOT torque it down too hard because it will break... I had to learn the hard way but that's O...

Glock Mag Coupler (9mm/.40)

Matthew S.

Hello, Great product and I appreciate the quality build. One suggestion. The Beretta 1301 is a very popular shotgun. One of the common upgrades is a Magpul forehand. The M-Lok slot will only allow for one screw/nut. In order to install, you must shave off the second (distal) mounting boss. If I could make one suggestion, it would be to make a match saver specifically designed with this in mind. Or, if this isn’t feasible, make this known on your website. Otherwise, phenomenal job! Sincerely, ...

M-LOK Match Saver

Aj G.

These Mag connectors are well built and deserve a 10- Out-Of - 10 Rating ! I highly recommend them for Speed . I’ll be buying a couple more. Thanks for a Quality Build !

Glock Mag Coupler (10mm/.45)

George R.

It's a perfect extended plate. I love it, but remember, it's a BASE extension, not a ROUND extension. Don't get them confused. But I love the aesthetic regardless!

Glock PMAG Extended Base Plate

Timothy B.

Great couplings, well made. Work perfectly! I bought two because I wasn’t sure how they were built…but I’ll be buying a few more because these are solid!

CZ Scorpion Mag Coupler

Oscar Delta Co. ReviewsMore details