Paula G.
I add a chse for my nose piece to slide in so it can be removed for laundering. Works great and keeps its shape well. Thank you for a great product!
Paula Grace
The Gilded Gypsy
DIY Mask USA ReviewsSee store reviews
Mask Insert - Contoured - 100 Count
Francesca H.
Hidden in this mask is a sturdy steel nose piece! They product is excellent! It moves quite easily, bendable and is easy to sew into a homemade mask! The shipping is rather quick and there is always someone there to answer any questions. Quick customer service! I would highly recommend this company! Excellent product, excellent service!
Mask Insert - Straight - 100 Count
Sherry B.
These nose pieces are the BEST! I’m half way through my 2nd set of 100! I still can’t decide which I like best. As you can see, I’ve made a few masks!
Mask Insert - Combo - 50/50 Pack
Kathryn L.
Its hard to see in the picture but the straight inserts work on both the flat pleated masks and the cone masks. We love the size! And they last, even through repeated washings.
Mask Insert - Straight - 10 Count
Beverly R.
I absolutely love sewing with the stainless steel bars for our masks I use the bars and I use the built-in filter so you can wash and dry these masks they come out perfect every single time you can use them and use them over and over again they will not break the filter that I use will not tear up at least not for years down the road I'd recommend them to anyone
Mask Insert - Straight - 100 pack
Diane L.
I really like the contour shaped nose wires because they are sewn on and will not break like the aluminum ones do after several reshaping and washing. Plans are to try the straight next time. A little pricey but worth it!
Mask Insert - Contoured - 100 Count
Neal D.
You can’t see the metal nose bridge because that’s how I wanted it! I bought aluminum to save money but they weren’t as good so I’m back to these, they work!
Mask Insert - Straight - 100 Count
Nina P.
Tried the shorter straight ones along with curved. These will work better with youth/small adult. Also needed a gold one for some fancy dress mask...gold spray paint works fine.
Mask Insert - Combo - 50/50 Pack
Susan W.
Friends and family keep asking for masks! These elastics are so soft, not irritating, and, since no 2 faces are equal in size and shape, the adjustable toggles make everybody happy.
Black Elastic - 20 Pieces (10 Masks)
Melissa J.
These rock!!! They're easier to sew in and the more I wear and wash them, the more I love them! At first, I wasn't sure because these nose strips are so much shorter than the craft wire I had been using. But after just a few washes the craft wire twists and moves. Ordered 3 times already and will be ordering more soon.
Mask Insert - Straight - 100 Count
Donna S.
I had bought some cheap ones but they didn’t have the small holes so that you could sew the band in place. Also with Advance you don’t have to keep adjusting the nose piece.
Mask Insert - Straight - 100 Count
Sherry B.
These shipped fast! This is my third hundred nose wires! These are the best by far! I’ve used both styles and people have their preference, so I will keep buying them here!
Mask Insert - Straight - 100 Count
Melody D.
My masks kept falling down which caused me to keep touching them. I put the nose wire in and the toggles on the ears and now they stay on great.
Mask Insert - Straight - 10 Count
Polly B.
These aluminum nose strips hold up better than others that I have purchased. The masks can be worn over and over, washed frequently, and still, the nose strips remain intact! I have purchased these twice, and will continue to do so as long as we need to wear masks to remain healthy!
Mask Insert - Straight - 100 Count
Katherine B.
I purchased several and sewed them in between the fabric layers for more comfort for my husband who wears them all day at work. He loves them. So much easier to breathe.
Mask Insert - Contoured - 10 Count
Susan P.
I love these metal bars. They are so easy to work. I am able to sew them inside between the outer mask and the mask lining and it fits perfectly. My husband asked me to put them on all his masks because it helps keep the mask from sliding down. This my second order and I know I'll be ordering more.
Mask Insert - Straight - 10 Count
Susan P.
I love these metal bars. They are very easy to work. You can sew them to the outside of the mask, the sewing holes are already predrilled, making it super easy. I like to sew them between the outer fabric and the lining and it fits perfectly. I just sew a casing, slide the bar in and topstitch around it on the outside. My husband asked me to put them on all his masks because it helps keep the mask from sliding down. This my second order and I know I'll be ordering more.
Mask Insert - Contoured - 10 Count
Sandy T.
I have used 400 of these straight stainless steel nose wires. I sew them in so have been careful to slow down, but still have broken several needles🤪. Looks like I will still be making masks for a while yet!
Mask Insert - Straight - 100 Count
Cathy S.
I chose to stitch a casing for the metal nose piece and it works great with the contoured face masks. I had an issue with my order and it was promptly remedied. Great customer service!!!
Mask Insert - Contoured - 10 Count
Nina P.
Sample of Christmas mask i made for craft show this weekend. Have been hearing praise from September buyers for the "metal bar" that i put in mask. Saying best wearing mask they have.
Mask Insert - Contoured - 100 Count
Kiirsten O.
These are just a few of the masks that I have made. I have donated these cat 🐈 and dog 🐕 masks to my Humane Society that I volunteer at and our local Cat Cafe for both to sell - with the money being donated for the animals!
When I dropped them off at the Cat Cafe they sold 4 of them before I left with my coffee! I am dropping some more off to them today. 😻
Mask Insert - Straight - 100 Count
Joan K.
These are definitely “on the nose!” You can’t see them because they’re sewn between the inter-lining and lining within the seam-allowance, but trust that they are the BEST at shaping to secure the mask on the nose!
Mask Insert - Straight - 10 Count
Shari H.
Best said by my dad when I added these to masks I gave him: "Game Changer." No more steamed up glasses for him, or for me; also meaning less entrance of air without passing through the fabric. I'm using the contoured ones for family; will be using the straight ones I sew into a pocket for the other masks I give out. Being stainless steel was critical, so that these go through the wash without rusting.
Mask Insert - Contoured - 100 Count
Carol H.
Love this product. The only thing I would like to see is an added hole punched at the center point. But for now I’ve just used the X design to keep it in place. Without that added tag it moved at the center. Overall, love it though. These mold to the nose, can be remolded repeatedly and hold up to being hand washed with the mask.
Mask Insert - Combo - 50/50 Pack
Mary G.
These make a big difference in the fit of the mask. Easy to use in both pleated and curved masks. They hold up great through the washer & dryer and are much sturdier than pipe cleaners or paper clips. Highly recommend!
Mask Insert - Straight - 10 Count
Anne T.
You can’t see this strong stealthy little piece of metal, but It is right inside a channel around my nose. This piece is so good, it makes my mask reversible! A gentle bend doesn’t snap the nosepiece flattening it on a table brings it back to straight to start again. I won’t use anything else for my customers. Thanks guys! Great job!
Mask Insert - Straight - 100 Count
Dianne F.
I have been making masks for my family and friends since last March. I missed not having a nose piece.
I loved your straight nose piece. It finishes my masks beautifully!
They arrived quickly.
Thank you.
Mask Insert - Straight - 10 Count
Lynn B.
The straight ones are perfect for childrens' masks. I am donating these to the school nurse where our 6 year old grandson is a first grader. Home of the dolphins!
Mask Insert - Straight - 100 Count
Patricia M.
I am making masks to give away at local food Bank. These parts are so helpful to speed the process. I put a nose piece and 4 pony beads for adjusting the ear fit. When I order I receive it in under a week.... So fast!
Mask Insert - Straight - 100 Count
Kathy W.
I have tried some of the other nose wires for the masks that I make. They all seem to break. I found these from advanced manufacturing enterprise and I love them! They do not break and they are heavy duty. I use them for the masks that I make and sell. You will not go wrong with these nose wires. Thank you so much.
Mask Insert - Straight - 10 Count
Kveta K.
I am an Etsy seller and mong other items, I sell cotton face masks. In the beginning, I used pipe cleaners for the nose bridge. One of my customers, who was a nursing assistant, was not very happy with the pipe cleaner and discovered this stainless steel insert. She ordered it and promised to let me know if it worked with my masks. A few days later she happily reported it worked great. My masks have a casing inside the filter pocket, where the nose bridge piece can be inserted and removed if nee...
Mask Insert - Straight - 100 Count
Jean M.
These are just a few I have made. I made several masks for family and friend and they love them. They love it when they find out I put the metal strip in them.
Mask Insert - Straight - 100 Count
Julie W.
These nose bands are much more solid and strong than I'd expected! Easy to stitch on, though I had to tack them down in the center - in future maybe add a middle hole? I think they'll outlast the masks they go on.
Mask Insert - Straight - 10 Count
Deborah D.
This isn’t the best picture, butI place the curved nose piece inside the mask, between the layers. I’ve traced with a fabric pen where it is so you can see it a little better. But I love the fit!
Mask Insert - Contoured - 10 Count
Susanne S.
I sew the metal strip under the top seam of these masks. They bend nicely to the shape of the nose and do not break the way the aluminum strips do. I have made and donated over 1000 masks and people have said that they appreciate the fit and durability of the nose piece. I plan to continue using the steel nosepieces.
Mask Insert - Straight - 100 Count
Suzanne C.
I purchased at least 40 of these so far, it really makes a huge difference in the mask fit! Everyone I give them to comments on how well they fit because of these!
Mask Insert - Contoured - 10 Count
Ajifa O.
I make sleeves for the nose guards on all the masks in my Etsy shop PON Handcrafts so that they are removable. These nose guards add so much value. Pretty much all others are aluminum or some other weak material. These are stainless steel, and a great deal more durable, but still easy to form. Will buy again.
Mask Insert - Straight - 10 Count
Karen M.
Inserts fit perfectly - had to file down 1 rough corner from the Steele punch on all 100, but that’s ok. I slide the inserts in the top seam of my masks!
Mask Insert - Contoured - 100 Count
Angelica G.
The straight nose piece is exactly what I needed for my masks! I had used aluminum ones and they were breaking after a while in use and difficult to replace once the mask is done. These are much stronger! Careful when sewing, they snap the needle and the aluminum ones didn't. Just shows their strength!
Mask Insert - Straight - 100 Count
Jeanne S.
I inserted mine into a mask I had already made, and hand stitched it into place. It made a big difference in the fit. I bought the flat ones that need shaping, and I’d use the same ones again.
Mask Insert - Straight - 10 Count
DIY Mask USA ReviewsVisit store