Motion Raceworks Reviews

Motion Raceworks Reviews

More details
Scott G. review of -6AN Flanged Bolt in Pass Thru Bulkhead Fitting by Fluidworks image 1 out of 1
Scott G.
I haven't installed the pass thru fittings yet but they look awesome and will mount perfectly inside the ribs of my truckbed floor. The fittings are needed to extend my existing fuel lines upward from the bed floor to the top of the fuel cell after I raise it up 5". Currently the fuel lines come up from underneath in a slot at the front of the cell and the bottom of fuel cell extends ~4.5" below the rear frame rails. That would be a major issue if the truck decided to drag the roll pan during...
-6AN Flanged Bolt in Pass Thru Bulkhead Fitting by Fluidworks
Nicholas W. review of Holley Hi Ram Vacuum/Boost Reference Port Adapter to 1/8" NPT (LS3 Map Sensor) image 1 out of 1
Nicholas W.
Needed a GM style to LowDollor adapter for my map sensor and knew this would work with a 90° Very good quality like everything I've gotten from Motion. 100% would recommend.
Holley Hi Ram Vacuum/Boost Reference Port Adapter to 1/8" NPT (LS3 Map Sensor)
Timothy G. review of Motion Raceworks Billet LS Valve Covers image 1 out of 1
Timothy G.
Everything fits together great. Had to modify the alternator bracket to get the drivers side to fit but otherwise it's perfect. The baffling inside the valve covers look really good too.
Motion Raceworks Billet LS Valve Covers
Mark M. review of Fluidworks Dual Inlet 12GPM Pre Fuel Filter w/ Mount (100 Micron) 27-173 image 1 out of 1
Mark M.
Holley or Aeromotive can suck it!! Those penny loafers wearing, cross leg setting, no balls haven hacks can’t figure it out or listen to what people need! Motion Raceworks makes exactly what was need for this fuel system! The Ferrari 430 has 2 tanks each equipped with its own bump, this filter makes it super easy to plumb the 2 pumps together and provide a high flow filter for max efficiency.
Fluidworks Dual Inlet 12GPM Pre Fuel Filter w/ Mount (100 Micron) 27-173
David H. review of Motion Raceworks Coolant / Transmission Billet Overflow Catch Can image 1 out of 4+3
David H.
Haven't put in in the car yet 2008 mustang coyote swap proformance T400 trans with pro tourq converter runs 8.90 s At Alaska race way park have your other blow by can already installed like always quality pices thanks David Hubbard Hubbard brother's racing 🏁
Motion Raceworks Coolant / Transmission Billet Overflow Catch Can
Cole G. review of Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270 image 1 out of 2+1
Cole G.
This kit was absolutely fantastic. The install went really well on my 1986 IROC Camaro. I did have to add a washer between the hub because the steering shaft was too long and the adapter wouldn't sit flush. Thanks Motion Raceworks for the great service and parts!
Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270
Josh B. review of Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270 image 1 out of 1
Josh B.
This is my second quick release steering adapter. The install is easy and straightforward. I like the “puzzle piece” style adapter for the column release, it makes locating a breeze.
Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270
Eduardo V. review of Fragola 8AN PTFE Lined Stainless Hose Black 6000 series, 20 feet 602028 image 1 out of 2+1
Eduardo V.
Ptfe hose assembly looked intimidating but after a email to motionraceworks to clear up a question I had was fast and easy installing fittings onto hose , love fragola products! And motionraceworks customer service. The best !
Fragola 8AN PTFE Lined Stainless Hose Black 6000 series, 20 feet 602028
Luis B. review of 4L80E 4 Speed Standard Pattern Operator Series Billet Shifter Front Exit image 1 out of 1
Luis B.
Very easy to install, you can tell thought was put into a lot of it. Little things like the port on the side to pop the pin out that holds the shifter cable. The grip is solid, only thing was that it takes a minute to get used to going from drive to reverse.
4L80E 4 Speed Standard Pattern Operator Series Billet Shifter Front Exit
Steve M. review of Motion Raceworks Billet LS Valve Covers image 1 out of 3+2
Steve M.
These valve covers are extremely nice! Finish and quality of everything is perfect. The smart coil brackets are great. I reversed covers so the oil fill was in the back on the drivers side so I could keep the -10 vents up front. I didn’t want to route AN hose over the coils packs or have them beside the blower. Very happy with these.
Motion Raceworks Billet LS Valve Covers
Christina S. review of Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270 image 1 out of 2+1
Christina S.
Here's my pic of the steering wheel and badass quick release hub, u guys are amazing on shipping and the tracking. Your on top of things . Thanks again will be shopping with u again
Motion GM/Ford Bolt-On SFI Steering Quick Release Hub 5/6 Bolt Pattern 15-270
Paul H. review of Push-To-Connect 1/4" OD Tube "T" Fitting 25-10002 image 1 out of 1
Paul H.
Quality products, plus you get a free sucker with every order 😁. Though all of the suckers I've eaten that come with each order..... Dr. Said I'm growing hair on my kidneys 🤣
Push-To-Connect 1/4" OD Tube "T" Fitting 25-10002
Carl W. review of Active 2 Stage Oil Separator / Oil Catch Can image 1 out of 3+2
Carl W.
Always great products and support. Dalton is always quick to respond and helpful. Active stage 2 catch can is awesome. I just made a small bracket out of some aluminum with a cutting wheel and drill to attach to head.
Active 2 Stage Oil Separator / Oil Catch Can
Rick H. review of Rear XS3 Extreme Street Brake Kit (GM 10/12 Bolt C Clip Eliminator) image 1 out of 5+4
Rick H.
XS3 brakes look awesome. What an upgrade from a 4 drum car. Just finished installing the rears. Had to make some adjustments due to issue with the factory 12 bolt. Overall highly impressed with all the components. This 68 camaro with TBM XS3 brakes should really put the grips on those slotted rotors when the car hits the road.
Rear XS3 Extreme Street Brake Kit (GM 10/12 Bolt C Clip Eliminator)
Jim S. review of ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection image 1 out of 1
Jim S.
As usual my Motion Raceworks TB arrived on time and works flawlessly! I love these pieces and really appreciate the guys in tech support. Special shout out to Dalton. He’s always helpful and knowledgeable
ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Mark S. review of Motion Raceworks Pro Titanium SFI Quick Release Steering Hub 5 Bolt Pattern 15-300 image 1 out of 3+2
Mark S.
Was really easy to order & shipping to UK was not an issue. I liked the fact I could ore pay all duties & taxes before it arrived. It’s a really well made piece and makes putting the steering wheel on very simple, no more faffing trying to align splines. I’m so pleased I made the switch, I highly recommend
Motion Raceworks Pro Titanium SFI Quick Release Steering Hub 5 Bolt Pattern 15-300
George F. review of Powerglide Operator Series Billet Shifter Rear Exit image 1 out of 1
George F.
I absolutely love this shifter. After looking at shifters, lower quality shifters were almost the same price. This shifter has some high quality machine work and appears to be the last shifter I will ever need for this vehicle. I should have bought it with the CO2. I bought the CO2 separately. Very smooth operation.
Powerglide Operator Series Billet Shifter Rear Exit
William C. review of Billet Dual Channel In Line Flex Fuel Sensor Mount For Feed or Return (6AN, 8AN, 10AN) Sensor Not Included image 1 out of 1
William C.
Pictures coming soon. Including valve covers. Catch can. Co2 canister and mount and plumbing. Totally pleased with all your products. Also your tech videos are helpful and enjoy watching them. 1974 nova is looking and running well also. 5.3 ls twin 64mm turbos with 13 lbs of boost making 700 at tires
Billet Dual Channel In Line Flex Fuel Sensor Mount For Feed or Return (6AN, 8AN, 10AN) Sensor Not Included
Gary P. review of Stroud 430 Pro Stock Pilot Spring Parachute (430-01) image 1 out of 1
Gary P.
Stroud makes a Great product, looks great and seems to be very well made. And the sales team at Motion Raceworks was very good to work with and very Knowledgeable. I would recommend dealing with them.
Stroud 430 Pro Stock Pilot Spring Parachute (430-01)
Darrell L. review of Motion Raceworks Billet LS Valve Covers image 1 out of 5+4
Darrell L.
Dalton was an amazing help and great customer service and was excited to help me out with my build! They have any and every thing you need to be looking your best for show or the strip
Motion Raceworks Billet LS Valve Covers
Cherry K. review of ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection image 1 out of 1
Cherry K.
upgraded to your icon throttle body and your fuel pressure regulator with the front timing cover mount and hose kit , which are all quality pieces. I'm always very impressed with your craftsmanship it's always top notch also have your gen 3 billet valley cover and 4 port steam kit . very well packaged worth every penny. thanks motion raceworks
ICON 92/95mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Joshua D. review of SBC Catch Can Kit For 1.22" Push In Grommets image 1 out of 2+1
Joshua D.
Great quality kit, well packed and protected, all parts arrived correct. Ordered extra hose, unfortunately they sent a separate cut, so a lot of waste was lost, but I wasn't short. So far everything I've purchased from Motion Raceworks has been excellent quality.
SBC Catch Can Kit For 1.22" Push In Grommets
Christopher N. review of Davies Craig EWP150 90° Steel Mounting Bracket 26-10019 image 1 out of 4+3
Christopher N.
I didn't use the bracket for a mount but I used it to mount a heat shield because my exhaust my pretty close to the water pump and was heating up my coolant. The mount was awesome and easy to work with. Also cheaper than any bracket I could've made. No brainer!
Davies Craig EWP150 90° Steel Mounting Bracket 26-10019
Lee A. review of Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port) image 1 out of 3+2
Lee A.
The product is awesome and the people here are great. I bought the 2 stage and had questions concerning the limits of the can after a friend informed me that I should have gotten the racing cath can. I called and spoke with Spencer. He was very knowledgeable and honest. He admitted that if I decided to hit 1200/rwhp that I needed the racing can. He accepted my return since I hadn't taken out of the box and sent me my new can. You can't go wrong with these guys. They're professionals.
Top Loader Billet Internally Baffled Oil Catch Can (Dual 10AN Port)
Thomas J. review of SBC Catch Can Kit For 1.22" Push In Grommets 32-100SBC image 1 out of 3+2
Thomas J.
Great customer service fitment was fine. Look as great. It seems to be working very happy with it although I would like to see a little bit more fashionable with valve cover connection.
SBC Catch Can Kit For 1.22" Push In Grommets 32-100SBC
Cody G. review of Motion Raceworks ICON 102mm / 105mm Interchangeable Throttle Body - Bare Billet Finish 10-140 image 1 out of 5+4
Cody G.
Product is amazing easy to install and looks beautiful going to look awesome sticking out the hood of the express mail jeep looking forward to showing it off rmrw 2024!
Motion Raceworks ICON 102mm / 105mm Interchangeable Throttle Body - Bare Billet Finish 10-140
Michael S. review of Motion Drive In Retro Shirt image 1 out of 2+1
Michael S.
Love supporting you guys! Had my Motion Raceworks shurt on over the weekend at World Cup Import vs Domestic cheering on Brett!! Was great to meet him, would have loved to meet and talk to Doug, but you guys were hustling to go rounds! Brett Lasala is a GREAT guy! Signed a shirt for my son, took pictures, even gave him a fist bump in the staging lanes before the final! I attached a few pictures, Snot Rocket in the lanes for the final, and I filmed his first round pass, and got the screenshot fro...
Motion Drive In Retro Shirt
Chase C. review of ICON 102/105mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection image 1 out of 1
Chase C.
Motion never fails with the perfect fit and finish. Dalton never ceases to amaze with his technical assistance and knowledge of the sport. He’s always there to answer any questions I have. Can’t recommend enough!
ICON 102/105mm Cable Drive Throttle Body (Black) w/ Interchangeable Connection
Ronald M. review of 1994-98 SN95 Mustang Strutless 15" Adjustable Wing 31-130 image 1 out of 3+2
Ronald M.
i actually modified it by shortening it and mounting it to the top of the trunk lid with rivnuts. its a little long for a street/strip car. didn't like the gap mounted on the back of the lid. packaging was awesome! delivered in perfect shape. highly recommended!
1994-98 SN95 Mustang Strutless 15" Adjustable Wing 31-130
Chad J. review of 10AN Push in Fitting for Factory GM LS Valve cover grommet image 1 out of 2+1
Chad J.
I have used motion products for all of my crankcase venting including the active 2 stage catch can. Works perfectly on my twin turbo 427 sbf. Staff was very helpful explaining the proper routing too. Highly recommend motion raceworks!
10AN Push in Fitting for Factory GM LS Valve cover grommet
Micky K. review of Coolant Expansion Tank / Remote Fill Billet Black Anodized w/ Mount image 1 out of 1
Micky K.
Bought this for a rear mount radiator setup in my 69 superbee. Out of the box you can tell its a quality piece. Anodizing is super nice and the bracket for mounting worked perfect. I plan to purchase the over flow can at some point.
Coolant Expansion Tank / Remote Fill Billet Black Anodized w/ Mount
Kevin J. review of 1978-83 Ford Fairmont Chromoly Lightweight Steering Column 15-100 image 1 out of 1
Kevin J.
Everything bolted right in place with no issues at all on my '81 Ford Fairmont 4 door aka "Atrocious." Ready to get this thing on the road and see how it all feels now. Great product, fast shipping and super helpful sales team.
1978-83 Ford Fairmont Chromoly Lightweight Steering Column 15-100
Jordan B. review of 27-17017: 10 Micron Replacement Fuel Filter Element for filter PN 27-178 image 1 out of 1
Jordan B.
Very easy to use, comes with mounting bracket and hardware to simplify install. Will use more in the future. Perfectly matches my 6gpm mechanical fuel pump for the import Honda guys.
27-17017: 10 Micron Replacement Fuel Filter Element for filter PN 27-178
Brendon J. review of LS Billet Overdrive Alternator Pulley SHIMS (pair) image 1 out of 1
Brendon J.
Customer service was awesome. Thanks a bunch. My application is for a Miata race car. Alternators in these cars burn out fast at long periods of RPM that are outside of the OEM specifications. Time will tell if this 3” pulley does the job. It’s 30% larger and 25% lighter than the 2” OEM pulley.
LS Billet Overdrive Alternator Pulley SHIMS (pair)
Tyler L. review of Motion Raceworks Single Push Button Steering Wheel Bracket 15-00004 image 1 out of 1
Tyler L.
Puts the buttons exactly where I need them. I feel like I have smaller hands for a man. But golly do I love these buttons. Motion definitely for the win. If you like to click a pen. Spend $60 in this button and you won’t be disappointed
Motion Raceworks Single Push Button Steering Wheel Bracket 15-00004
Ray M. review of Motion Raceworks 48" Throttle Cable Carburetor Attachment w/ GM/Ford Pedal Attachment image 1 out of 1
Ray M.
Throttle cable was very well made easy to install especially with GM design meaning I got to keep my factory gas pedal couldn't be happier. I also ordered another one for my 80 Pontiac trans-am
Motion Raceworks 48" Throttle Cable Carburetor Attachment w/ GM/Ford Pedal Attachment
Sean H. review of Motion Raceworks SFI Quick Release Steering Hub 5/6 Bolt Pattern 15-240 image 1 out of 1
Sean H.
Way better than expected, Perfect fit and super easy to line up when you are in a hurry vs other splined hubs. The quick release fit our Grant 5 spoke wheel perfectly.
Motion Raceworks SFI Quick Release Steering Hub 5/6 Bolt Pattern 15-240
Jonathan C. review of Motion Raceworks 16 Tooth High Def Driveshaft Speed Wheel (Ford 9") image 1 out of 1
Jonathan C.
Yeah very very well engineered product, the reluctor wheel is machined perfectly and fits precisely. I love that it reads at very low shaft speeds. Highly recommend anybody who needs a speed sensor on a 9" to go with this
Motion Raceworks 16 Tooth High Def Driveshaft Speed Wheel (Ford 9")
Tyler L. review of Motion Raceworks Edition MPI Race Steering Wheel - MPI-DRG-R513-MRW image 1 out of 1
Tyler L.
Motion is the best, great quality, very knowledgeable, this is my 3rd order from them. Even walked me through what would work, what all I needed. Quick shipping, man I love Motion.
Motion Raceworks Edition MPI Race Steering Wheel - MPI-DRG-R513-MRW
Mike M. review of Remote Catch Can/Coolant Can Drain Kit image 1 out of 2+1
Mike M.
Excellent product. Solved my issue with being able to drain my catch can without having to remove it. Kit is really well thought out, came with everything needed and was a quick and easy install!
Remote Catch Can/Coolant Can Drain Kit
Motion Raceworks ReviewsMore details