Motion Raceworks Reviews

undefined review of Motion Raceworks SINGLE Wastegate Turbocharged CO2 Kit image 1 out of 1

Jb K.

Great kit. Had everything I needed minus a regulator seal. Had to order a leak stopper brass/o-ring seal to get the regulator to cylinder sealed properly. Leaks co2 without a seal.

Motion Raceworks SINGLE Wastegate Turbocharged CO2 Kit

undefined review of 2005-14 Mustang S197 Parachute Mount 14-140 image 1 out of 1

Andrew L.

This is actually my second parachute mount. I hit the wall with the 1st one and it held up to a decent smack and saved the car from expensive repairs.

2005-14 Mustang S197 Parachute Mount 14-140

undefined review of LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042 image 1 out of 1

Michael B.

Kept blowing up alternators spinning the motor over 7k. Powermaster recommended their oversized pulley to fix the issue, but nobody had one in stock. Then I found this BEAUTIFUL piece which solved my problem. Also didn’t affect charging at idle at all (although my motor idles around 1k), the alternator still puts out 14.2 volts on average. Best purchase I’ve made in a long time, thanks again!

LS 3" OD Billet Overdrive Alternator Pulley 6 Rib 10-10042

undefined review of LS3 Intake Vacuum/Boost Reference Port Adapter to 1/8" NPT (LS3 Map Sensor) image 1 out of 1

Lawrence F.

This adapter also works for the FAST LSXR intake manifold but you'll have to use the Torx 20 bolt included with the intake. The o-ring seals really tight with the required drilled out 15/32 hole.

LS3 Intake Vacuum/Boost Reference Port Adapter to 1/8" NPT (LS3 Map Sensor)

undefined review of IAC Block off Plug for ICON Throttle Body 92/102mm 10-10039 image 1 out of 1

Raymond R.

I liked the look of it. I had to cut the end off to fit on my Holley Sniper Duel Plenum intake to work. Maybe some more information on what intakes it will and will not work on. But in reality a little fabrication is the name of the game.

IAC Block off Plug for ICON Throttle Body 92/102mm 10-10039

undefined review of Motion Throttle Cable Bracket for ICON 92/102mm for Motion Raceworks / Lokar Cable 18-11009-1 image 1 out of 1

Nate O.

This bracket fits great and gives a great look to this setup! Fits like a glove and functioned perfectly. Helped me avoid welding on a very nice intake lid (which is a 417 lid for a high ram anyone wondering about fitment)

Motion Throttle Cable Bracket for ICON 92/102mm for Motion Raceworks / Lokar Cable 18-11009-1

undefined review of Motion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) 32-100 image 1 out of 1

Nathan L.

Material and craftsmanship is second to none! Don't bother with cheap Ebay junk, cause I did and after many hours of frustration I finally just ponied up and bought this. Highly recommend this as the adjustability is awesome! This was my first purchase from motion and because of the quality I will continue to purchase products from them.

Motion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) 32-100

undefined review of MPI Drag Racing Concept Specific Steering Wheel - MPI-DRG-13 image 1 out of 1

Chadrick G.

Nothing to say that hasn't already been said. The steering wheel is top notch and at a great price point. The Customer Service is even better, great job Motion Staff!

MPI Drag Racing Concept Specific Steering Wheel - MPI-DRG-13

undefined review of Motion Billet T4 T6 Turbo Drain Oil Flange 10AN 21-10008 image 1 out of 1

Jason B.

Great piece. I like the idea of the AN fitting should the drain hose need removal. I find this much easier than removing the flange bolts from the turbo itself in the tight space available on my car.

Motion Billet T4 T6 Turbo Drain Oil Flange 10AN 21-10008

undefined review of Motion Raceworks Billet IGN1A, Holley, AEM, Firecore, Accel, Smart Coil Mounts (Pair) 18-10017 image 1 out of 1

Don L.

Looking for a great coil on plug mounting solution? Look no further. It took less than an hour to mount the coils on my valve covers. The way the coils stack reduces the length of the coil pack for a clean look that has ample room for the breathers. Super affordable and made in the USA!

Motion Raceworks Billet IGN1A, Holley, AEM, Firecore, Accel, Smart Coil Mounts (Pair) 18-10017

undefined review of Motion Raceworks 1982-1993 1st Gen S10 / Sonoma 15" Strutless Drag Wing 31-110 image 1 out of 1

Dustin T.

Installation was easy and enjoyable. There were 4 bolts and nuts out of the whole kit that stripped out within 2 turns. ( which is not bad ) In other kits there are a lot more. I would recommend this wing to everyone. Way easier than any other wing I’ve put together.

Motion Raceworks 1982-1993 1st Gen S10 / Sonoma 15" Strutless Drag Wing 31-110

undefined review of Ford 90mm to LS 92mm 4 bolt ICON Throttle Body Adapter Plate 38-10001 image 1 out of 1

Adam C.

I switch from a mustang 5.0 style throttle body to an LS dbw setup on my Honda crx, this adapter made the switch super easy. It would be nice if both sides of the flange were O-ring sealed but it’s a great piece and works great!

Ford 90mm to LS 92mm 4 bolt ICON Throttle Body Adapter Plate 38-10001

undefined review of Cleetus Edition Billet Parachute Handle Kit: Hell Yeah Brother image 1 out of 1

Benjamin W.

While updating the car I didn't want the same old boring parts as my buddy's have so I ordered the Cleetus billet handle and do not regret it. When I'm yeetin and skeetin I have the confidence Bald Eagles are going to fly out of my chute and stop me quick once I hit that lever. Hell Yeah Brother!

Cleetus Edition Billet Parachute Handle Kit: Hell Yeah Brother

undefined review of Motion Raceworks Passenger Side Cable Drive LS Mechanical Fuel Pump Bracket Corvette Spacing image 1 out of 1

Doug L.

Installed on a 2002 f-body , I had to do some minor modifications mainly because I’m using the dart ls next block and had turbo hot parts that I had to work around. I had to order a shorter belt but I would say since I was able to make it work in my tight quarters that it should work good on most applications.

Motion Raceworks Passenger Side Cable Drive LS Mechanical Fuel Pump Bracket Corvette Spacing

undefined review of Black Motion Raceworks Flexfit Hat S/M & L/XL image 1 out of 1

Richard C.

This is by far the most comfortable and best fitting hat I have ever ordered....and that is saying a lot as I have a big and weird shaped head!

Black Motion Raceworks Flexfit Hat S/M & L/XL

Rob S.

So I bought this hat simply to replace an old hat I had. Little did I know that as soon as I put it on my head, a bald eagle pulled up in front of my house in an IROC Camaro with a hog ass cam ripping the nastiest burnouts to the Freebird guitar solo. Oh and I got a free sticker too. If you love freedom and want to instantly be cooler than anyone else around you, buy this hat.

Black Motion Raceworks Flexfit Hat S/M & L/XL

undefined review of Motion Raceworks DIY Lightweight Chromoly Steering Column Kit 15-210 image 1 out of 1

Mike R.

Used the DIY column in my 96 impala ss that is being set up for street/strip use. Mocked the g-body style mounting and welded up some brackets to make it a simple bolt in. Topped it off with a billet directional handle 🤙🏻

Motion Raceworks DIY Lightweight Chromoly Steering Column Kit 15-210

undefined review of LS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers 10-12007 image 1 out of 1

Michael D.

Love these brackets and the valve covers they attach too. The adjustability is nice as well, and allowed me to keep the coil farther away from the heat of the turbo.

LS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers 10-12007

undefined review of 1988-98 OBS GM Truck Manual Master Cylinder Kit 20-110 image 1 out of 1

Tyler S.

Awesome job Motion! Love the look and the feel. I Highly recommend for you street and strip OBS guys out there! Install was very straight forward if you’re familiar with making brake lines!

1988-98 OBS GM Truck Manual Master Cylinder Kit 20-110

undefined review of 4L80E 4 Speed Reverse Pattern Operator Series Billet Shifter Rear Exit image 1 out of 1

Brock S.

Been anxiously waiting for this shifter to come out. This is just mock up and I’m just thrilled with how good it looks and feels! Dalton you were right again! This thing just looks sick in my car! As usual, my customer service is just as outstanding as their parts!

4L80E 4 Speed Reverse Pattern Operator Series Billet Shifter Rear Exit

undefined review of Bubba's Nova Shirt Bench Seats and Burnouts (All Proceeds go towards Bubba's Buddies Non Profit) XS-4X image 1 out of 1

Cameron C.

I love the quality of everything I buy from Motion and also love to support built in the USA as much as their crew and partners! I’m hopeful that some day, more companies will wake up and create more products on our soil. Cam

Bubba’s Nova Shirt Bench Seats and Burnouts (All Proceeds go towards Bubba’s Buddies Non Profit) XS-4X

undefined review of Motion Raceworks Billet Valve Cover Breathers Black Anodized (Pair) 32-120BLK PAIR image 1 out of 1

Craig D.

The ability to increase the breather hose size help with reducing engine leaks and the dip stick blowing out under boost. The motion raceworks breathers almost eliminated all oil from the top end. Thanks, Craig Davis www.davisracingteam.com

Motion Raceworks Billet Valve Cover Breathers Black Anodized (Pair) 32-120BLK PAIR

undefined review of Motion Raceworks Top Loader Billet Oil Catch Can ( Single 12 AN Port ) 32-101 image 1 out of 1

Craig D.

Motion Raceworks Top Loader Billet Oil Catch Can ( Single 12 AN Port ) 32-101

undefined review of Motion Billet Gen V LT Valve Covers (Black Anodized Finish) 11-120BLK image 1 out of 1

Raymond R.

Today I installed the valve cover and breather in my 2017 chevy Silverado 5.3 l83 engine very happy with the value cover installation and the only thing nowhere to mount oil dip stick tube and passenger side nowhere to mount heater hose bracket that the only thing very easy to install and I crank case breather also

Motion Billet Gen V LT Valve Covers (Black Anodized Finish) 11-120BLK

undefined review of BLEM LS Billet Valve Covers 10-120BLKBLEM image 1 out of 1

Brock S.

I’ve been wanting these valve covers for a long time. When I seen the blems come up for sale, I showed my wife. She got them for me and they’re so much nicer than expected! Customer service is so polite and really appreciate their customers. I’ll be a long time customer for sure! They earned it!

BLEM LS Billet Valve Covers 10-120BLKBLEM

undefined review of Motion Raceworks 36" Throttle Cable w/ GM/Ford Pedal Attachment 18-140 image 1 out of 1

John F.

So well made for such a simple, easily overlooked, very critical piece of the puzzle. Easy to install, adjust, cut to fit and very easy to remove once assembled. My intake is flipped around and not the easiest to remove.

Motion Raceworks 36" Throttle Cable w/ GM/Ford Pedal Attachment 18-140

Richard G.

Showed up ups ground fairly quick. Found a good location for it to be mounted. Quality seems nice. I’m a machinist so it’s nice seeing ORB ports machined correctly !! Nice finishing touch on my breather system! Thanks !

Motion Raceworks Top Loader Billet Oil Catch Can ( Dual 10 AN Port ) 32-100

undefined review of C5 Corvette Parachute Mount (Under License Plate) 14-220 image 1 out of 1

Matthew P.

I’ve never done a chute install before so this was perfect learning experience. I am very glad I had skinny arms to place the brackets Inside the bumper though 🤣. The cable was easy to run and the entire kit was easy to install. And of course the customer service is ridiculously awesome!

C5 Corvette Parachute Mount (Under License Plate) 14-220

undefined review of Motion Raceworks Chain Travel Limiters w/ Quick Pins image 1 out of 1

Cody S.

Before we put these on my car would nearly set it on the bumper every pass and slam down hard. These allow for a ton of adjustment and work awesome.

Motion Raceworks Chain Travel Limiters w/ Quick Pins

undefined review of CO2 Shifter Kit 16-150 image 1 out of 1

Philip

My awesome wife brought this kit for me as a Christmas present. Can not wait to install on your shifter that I got few months ago that I also love.

CO2 Shifter Kit 16-150

Nikolas W.

Fits gen 2 Coyote manifold perfect! since there’s a gap in the runner gen1/gen3 it makes the cable turn right off the bracket but would most likely still work!

Motion Throttle Cable Bracket for ICON 92/102mm for Motion Raceworks / Lokar Cable 18-11009-1

undefined review of Motion Raceworks Billet Valve Cover Breather / Oil Drain Black Anodized (Single) 32-120BLK-S image 1 out of 1

Joel S.

Recently install this on my F250 cummins. I used the stock timing cover vent and added one of the motion raceworks valve cover vents to the factory valve cover. The install is easy with the template and provides a clean look. Looking forward to an update in 5k miles.

Motion Raceworks Billet Valve Cover Breather / Oil Drain Black Anodized (Single) 32-120BLK-S

undefined review of Motion Raceworks ICON 92mm /95mm Interchangeable Throttle Body 10-130 image 1 out of 1

Brian S.

Was supposed to be on a budget but these amazing products Motion has threw that budget out the window. Looks amazing and the quality is hands down the best! Had another TB but hood clearance was a issue and wouldn’t be able to use a t bolt clamp for the silicone coupler also the return spring was kinda soft. This icon unit solved all that.

Motion Raceworks ICON 92mm /95mm Interchangeable Throttle Body 10-130

Brian S.

Don’t even think twice. These things look amazing to me! I can’t find what was wrong with them I’m afraid it they keep getting good reviews for something that they claim is blemished they are going to charge more or lower their standards and won’t be able to get them for this price. Will definitely buy again on my next project. Keep up the awesome work and parts!

BLEM LS Billet Valve Covers 10-120BLKBLEM

Sergio M.

With Holley low ram fits great under hood with no trimming, on a 99-06 Silverado. Iced down even in hot Texas weather won’t se more than 80deg at end of run. Great product for sure!

Shearer Fab Low Profile HiRam LoRam Cooler, 1800hp SF06-02012

undefined review of Motion Billet Fuel Cap (Screw on) 12 bolt w/ Seal and Hardware 27-150 image 1 out of 1

John F.

A few weeks ago at the gas pump, I could not remove the plastic standard cap on my cell. Needless to say I ordered this that night. The fit and finish is second to none. Feels so solid, so well made, just like every other Motion part, expect nothing less.

Motion Billet Fuel Cap (Screw on) 12 bolt w/ Seal and Hardware 27-150

undefined review of Billet Burn Down Breather Quick Release Fittings Clear Anodized (Pair) 32-130 image 1 out of 2

Bryan H.

Obviously they work great but no is mentioning why they work. The simple fact they put the schematics on the website is a game changer. Having a weird engine combo like I do (tall deck hemi headed ford) aftermarket support is very hard to get and being able to look at something and know for a fact it’s gonna fit is a great feeling.

Billet Burn Down Breather Quick Release Fittings Clear Anodized (Pair) 32-130

undefined review of T4 / S400 / GT55 Turbo Low-Pro Oil Feed Flange 21-10010 image 1 out of 1

Michael F.

Installed on vs racing turbo and had to grind of some of the edge to fit. I guess I thought it would go perpendicular with the turbo but this turbo is different. Vs racing billet gt42 80mm t4. More my fault than motion. The piece is high quality just wanted to show not all flanges may work.

T4 / S400 / GT55 Turbo Low-Pro Oil Feed Flange 21-10010

undefined review of Motion 80's Fade Hoodie image 1 out of 1

Scott S.

This fall hoodie fits like a warm hug. Motion uses canine labor to pack and ship their goods and my Maeby definitely approves. I think she’s filling out an application as I write this review.

Motion 80’s Fade Hoodie

undefined review of Motion Raceworks Gen 3 LS Engine Lift Plate (LS1/LS2) image 1 out of 1

Michael M.

Who's days Gen 3 stuff won't work on a Gen 4? 🤣 Yep... I screwed up when I ordered the Gen 3 lift plate for my Gen 4 block but it still works as it should. Super convient having the bolts right attached to the plate. Made picking up my engine from the builder and putting it into my Yukon super easy. It's a unit for sure and will be sitting here waiting for the next time I should happen to need it with no missing hardware. And ya know whay? It's made in America! 🇺🇸🦅

Motion Raceworks Gen 3 LS Engine Lift Plate (LS1/LS2)

Motion Raceworks ReviewsMore details