Just finished putting my bench together for silverback 6060 & 6550 with a table that can be lowered to fit thicker objects reworked my drag chain so it has less stress on it finally got my replacement spindle so am now up and running again.
YoraHome CNC Laser Engraving Machine 6550
Shawn N.
Here's a SILVERBACK project with a retro touch. 1/4" Birch ply, with veneer edge banding to hide the ply. Everything cut with a 1/2in 60deg V-bit, tool paths done in V-carve used easel as my post processor, Black epoxy fill, dark walnut stain, 2 coats of clear lacquer to bring the shine.
YoraHome SilverBack Benchtop CNC 6060
Jeffrey B.
Well folks, our YH 6550-PRO 80W arrived the other day and we got it assembled last night. Today, we put it head to head in a cut test against my YH 65100 40W.
Don't mind the workshop .... we're in the process of getting ready to move all the equipment out of the house and into our new insulated shed.
The wood used was 3mm Baltic Birch (Approximately 2.7mm on my callipers). Both pieces were cut from the same 5x5 sheet into 20" squares for our use.
The following settings were used for single pa...
