EZARC Tools Reviews - 4,381 Reviews | www.ezarctools.com

EZARC Tools ReviewsSee store reviews

Name: EZARC Tools
Rating: 4.7

Customer photo review of 42 In 1 Precision Ratchet Screwdriver Set, For Furniture Bicycle Computer Electronics Maintenance

Greg D.

The ratchet tool is of very good quality. I use it often and’s really like the versatility. The ratcheting action has an incredibly small movement between stops so it is easy to move in tight spaces. I’m quite pleased with it.

42 In 1 Precision Ratchet Screwdriver Set, For Furniture Bicycle Computer Electronics Maintenance

Customer video review of Tree Trimming/Wood Cutting – Japanese Teeth 6 TPI Reciprocating Saw Blade

Ben S.

I have been wanting a 6" chainsaw to prune my orchard for quite some time and I haven't been wanting to spend the hundreds of dollars for that tool. I came across these prune blades and thought Id give 'em a try instead. They cut cleanly and did not disappoint.

Tree Trimming/Wood Cutting – Japanese Teeth 6 TPI Reciprocating Saw Blade

Customer video review of Worry-Free Purchase

David F.

Love my new blade! I keep it in the skid due to its size , because a chainsaw is too large for the cab. It helps get me out of a bind when trees need more cutting in order to stack better in the brush pile.

Worry-Free Purchase

Chris M.

We are Genesis Structures and Tiny Homes We really like these Saw blades and the other products that we plan on ordering from you in the very near future thank you for this channel.

Tree Trimming/Wood Cutting – Japanese Teeth 6 TPI Reciprocating Saw Blade

Customer shows large tree roots in the dirt, cut using the ProCut saw blade near a foundation.

Jeffery C.

I had some pine trees removed and the stumps ground down. There were still some large roots close to my foundation and I used the Erac Arc-Edge 15" pruning blades RV0615AHJU to cut them up and remove them. I removed much of the dirt but there was still dirt around. These blades did everything I asked and more. I tried my chainsaw first but the dirt dulled them very quickly. These blades lasted much longer and even when they had to do a job in the dirt. Very happy!

Tree Trimming/Wood Cutting – ProCut U-Groove Arc Edge Pruning Reciprocating Saw Blade

Nicholas G.

I used this 15 inch pruning blade to cut a marine treated 2.5CCA 6 inch piling and as you see it cut through like butter. I recently discovered ezarc and im really impressed with their products. Their blades work as well and hold up as well a the big brands like milwaukee and diablo. Im gonna continue to buy all my blades from them in the future. Im super impressed.

Tree Trimming/Wood Cutting – ProCut U-Groove Arc Edge Pruning Reciprocating Saw Blade

Customer video review of Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

John H.

Here I am removing old holly bushes after downing a 20’ pine tree, several moderate sized tulip poplars and cutting thick roots- in the ground- of a hawthorn tree. All on one blade and it’s still cutting like new. I was a sceptic but no longer. These pruning blades are the real deal.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Customer's workbench with various metal pieces, including an intricate sculpted hand made using the cutting discs.

Donna H.

I am a metal sculptor and use Dremel cutting discs for fine sculpting. Don't get me wrong, they work well but are quite expensive and I can go through them rather quickly. As you can see from the pictures, I started with a piece of rusty metal rod and turned it into arms with hands and fingers. I decided to try these cutting discs and am very impressed with how they work. Even better, they came with 2 mandrels which fit into my Dremel. I also love the container which has impressions to hold t...

1-1/2 Fiberglass Reinforced Cutting Disc For Hardened Steel, Aluminum, Plastic

Nick T.

We cut roots and stumps almost on every job and have been using saws all blades from the box store, which don’t work very well. Cannot believe how this has speed it up our demo jobs. We love these blades.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

James C.

I'm no expert by any means and I had used standard blades before with a lot of frustration. I saw this blade and wondered if it was just a gimmick but took a chance anyway. I'm making a small coffee table and I use branches for legs so I thought I'd try the new blade on an end piece of wood which I would use for one of three legs. All I can say is that it was like a knife through butter compared to other smaller blades that I have used with this tool. I am very happy with the three pack and wo...

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Timothy L.

I've been using the heck out of those blades. 3 have broke off at the head which is expected. I have 2 left from the 5 pack that I bought. They work great.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Emory M.

Bought saw blades from you and they did great when used to prune my trees and remove brush. I’d buy more but I worked all day using only one of the three blades I received. Recommending to my friends for sure.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Customer photo review of 4.5/5/7/10 in. Super Thin Diamond Blade For Tile/Marble/Granite

David R.

I like to do woodworking and around the house DIY projects as well as most of my own vehicle mechanic work. I also cut & polish those old rocks for my lapidary hobby. This is a great pair of very well made 5" Diameter x 7/8ths" Arbor thin (1mm at the edge) diamond saw blades with a continuous rim and a full 10mm diamond sintered cutting surface. These include an arbor reducer. I like the quality of these and the price is excellent. These will cut ceramic tile, stone like granite or marble as wel...

4.5/5/7/10 in. Super Thin Diamond Blade For Tile/Marble/Granite

Peter S.

By far the best blade I have ever used for trimming branches and roots. I bought a 3 pack and use one just for cutting tree roots in the ground. This thing doesn’t seem to have any dulling cutting through roots in dirt and rocks. Amazing.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Paul H.

My new EZArc Pruning Blade works very well for cutting through a lot of branches quickly on standing or downed trees. I am quite pleased with its effectiveness! I am using it with a Bosch 18v cordless reciprocating saw, and it is wonderful!

Tree Trimming/Wood Cutting – ProCut U-Groove Arc Edge Pruning Reciprocating Saw Blade

Alex T.

These blades did the trick to cut through water logged fallen Trees. I was waist deep in the River, straddling the Tree, so I needed something I could depend on to get the job done. The blades, attached to my Milwaukee sawzall, did not let me down. July 2026

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Customer video review of EZARC Gen 4 Obsidian Carbide Oscillating Saw Blades for Hard Metal, Nails, Bolts, Screws

Timothy S.

I bought six of these blades and I’ve been using the same one for over three weeks now, I’ve used it on Durock metal wood. Everything in the blade just keeps working. It’s amazing.

EZARC Gen 4 Obsidian Carbide Oscillating Saw Blades for Hard Metal, Nails, Bolts, Screws

Reviewer's yard after clearing shrubs with pruning blades, showing the cleared area along the house.

William W.

I purchased the EZARC 15” pruning blades with 6 TPI. I didn’t take photos of the “before”except a short section prior to cutting/removal I completely removed my ligustrums across the front and side of my house using your blades with my sawzall. The shrubs were about 50’ long and 36” high. Some of the roots / trunks were about 2”-6”inches diameter. The blade sliced through the ligustrums with ease! I would highly recommend these blades for shrubs an even small trees!

Worry-Free Purchase

Customer's photo showing a large log on a sawhorse with many piles of neatly cut wood after using the saw blades.

Steven H.

Used both 15" and 9" blades, they both worked "fantastic ". I'm very happy with my order. I have a lot more cutting to do. I have every confidence they will work perfectly!!

Tree Pruning/Wood Cutting – 12 Piece Wood Pruning Reciprocating Saw Blade Set

Reviewer's dismantled ice cream machine components on the ground, cleaned by Metal Cut Off Disc.

Wayne B.

Dismantled an entire ice cream machine in like 15 minutes Your blades are better and longer lasting than any Diablo blade and the price is right They are as advertised longer lasting than any I’ve ever used

Metal Cut Off Disc For Metal and Stainless Steel

Adam C.

These blade are so good, cutting this stump was the 4th one along with trimming a cherry tree. So they stay sharp even when you need to go into the dirt.

Tree Trimming/Wood Cutting – ProCut U-Groove Arc Edge Pruning Reciprocating Saw Blade

Chris S.

I bought the Ezarc pruning blades to cut the small branches off the dead tree that I was planning to fell. However, the blades were that good that I used them to cut the large (6" Diameter) limbs off the tree. I was planning to use my chainsaw to cut them, but The Ezarc pruning blades in my Makita reciprocating saw were easier and safer to use up a ladder, that was leaning against a dead tree!

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Customer video review of EZARC 12PCS Titanium Countersink Drill Bit Set with 5 Extra Pilot Bits and Case for Wood, Hardwood, Softwood

Ronald R.

I like that the drill bits are straight, not tapered. The tip does not burn like other tapered drill bits I have tried. I like that there are extra drill bits included. I like that the counter sink is sharp and is in contact with the drill bit no matter what you adjust the depth at. The other tapered drill bits have more cutting edges for the countersink part, but when you adjust for a shallow hole, the countersink surface does not make contact with the drill bit, causing a bunch up of wood chip...

EZARC 12PCS Titanium Countersink Drill Bit Set with 5 Extra Pilot Bits and Case for Wood, Hardwood, Softwood

Customer's yellow reciprocating saw with a Japanese teeth arc blade, resting on scattered wood and branches outdoors.

Robert D.

These blades are incredible! Made my cheap Walmart reciprocating saw cut better than my $500 Stihl chain saw. Treee stump, brush and a split rail fence were no match for it. Even was down in the mud removing the stump, which would have required a stop to sharpen or replace a chain, was not an issue. I just wire brushed the mud off and kept going. Can’t wait to order more.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Stephen M.

This is Steve from Yass. I brought a 3 pack of EZARC 15 inch blades. I have wacked one into my Ryobi reciprocating saw. They are soo good. I have worn the markings of one blade already. It has gone through tree branches 5 inches thick. I have used it to prune cherry trees, pine trees, and apple trees. I have used it to carve through brambles hedge. It has cut my pruning time in half. Ripper product. Love it.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Jeffrey B.

These blades cut like butter! You could submerge them in dirt/clay or southern clay then cut green limbs. They will still cut like brand new. I will always order these blades!! 💯

Tree Trimming/Wood Cutting – ProCut U-Groove Arc Edge Pruning Reciprocating Saw Blade

Customer video review of Pruning – Fleam Ground Teeth, 9/12 in, 5 TPI Reciprocating Saw Blade

S S.

I am still on my first blade and it is still going strong after clearing a ton of heavy brush along a diversion ditch, that had to be over 800 feet. The blades were used in a Ryobi consumer quality reciprocating saw and it worked GREAT! I will be purchasing other products from this company.

Pruning – Fleam Ground Teeth, 9/12 in, 5 TPI Reciprocating Saw Blade

A photo of the customer who submitted the review for the reciprocating saw blade.

Hector H.

Awesome BLADES !!! I had a lot of branches to cut, and these blades worked like a charm!! I will be ordering another package of 3 more blades, but I HAVE TO WAIT UNTIL THESE GET DULL. THESE LAST SO LONG BECAUSE OF THE AWESOME ENGINEERING !!

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Customer's photo of a large, leafy bush next to a house before being trimmed with the reciprocating saw blade.

Edward T. B.

Actually purchased the product with this particular project in mind ...after trimming the branches I utilized the new blades to trim the bigger branches down to the ground level and even was successful at cutting some of the protruding roots...from my perspective the blade performed excellent and I would recommend it

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Customer's photo of a thick tree branch on a patio, cleanly cut using the ProCut saw blade.

Marc K.

Your new 15” blades with the U groove worked perfectly to help me cut out a very wide branch and several big roots from this purple plum tree. My other no name brands just burned and bound up while trying. Now the test is the remaining trunk. I’ll let you know. The diameter of the pieces shown is about 8 inches. Thank you EZarc Yours, Marc

Tree Trimming/Wood Cutting – ProCut U-Groove Arc Edge Pruning Reciprocating Saw Blade

Customer photo review of Thick Metal/Cast Iron Cutting – Carbide, 6/9 in, 8 TPI Reciprocating Saw Blade

Woodley420

This blade cut through these high strength u-bolts with no problem. Took about 3 minutes to cut through 8 of these u-bolts that were too long on my suspension lift on my truck. I first tried a Dewalt metal cutting blade and it barely made a scratch in the bolt so I bought some of these and it cut through them like butter. Would highly recommend.

Thick Metal/Cast Iron Cutting – Carbide, 6/9 in, 8 TPI Reciprocating Saw Blade

Customer photo review of Heavy Metal Cutting – Bi-Metal, 6/9/12 in, 14 TPI Reciprocating Saw Blade

Sandra F.

I went with the 12 instead of the 9. I've been using 6, which bend on me a lot when cutting pallets. I went through 3 pallets in under 15 min. No bending (longer blade helps a lot) and the teeth look great! Check out the before and after. So far, I'm tired, but the blade is super happy, ha!

Heavy Metal Cutting – Bi-Metal, 6/9/12 in, 14 TPI Reciprocating Saw Blade

Customer photo review of Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox

Gh905

i bought this to cut up alot of scrap metal, i am accustomed to those thin cut-off discs but they always seem to explode or just simply wear down quickly. this diamond wheel was cutting steel, metal /alloy like a hot knife through butter but after around 4 / 6 cuts of thick steel (20mm) the wheel started to lose its momentum. it was taking longer to cut through the same steel that it just sliced through. i eventually stopped using it, switched it out for a thin cut off disc to finish the task....

Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox

Christopher B.

Really nice blades, very handy for cutting up larger limbs and smaller trees. I am looking forward to ordering some of the bamboo specific ones to cut up some bamboo in my yard.

Tree Trimming/Wood Cutting – Japanese Teeth Arc Edge 6 TPI Reciprocating Saw Blade

Customer photo review of Tree Trimming/Wood Cutting – Japanese Teeth 6 TPI Reciprocating Saw Blade

Jim M.

These blades are without a doubt the best pruning blades I’ve ever used. Where have they been all my life? I’ve cut hundreds of feet of branches with a single blade and it didn’t bat an eye. So I thought I’d remove a 40 year old sago palm stump with the same blade. Imagine plunge cutting the full length of the blade and it performed amazingly. The only thing keeping this blade from working, is me. This thing is wearing me out! Thanks, I guess.

Tree Trimming/Wood Cutting – Japanese Teeth 6 TPI Reciprocating Saw Blade

Just S.

I couldn't imagine one of these blades could do 5000 cuts of anything, but I decided to give two of them a try over the pack of 25 discs I usually buy. The Graff disc took 3:54 to cut through 1.25 rebar. Unfortunately, as the abrasive edge quickly wore off, the blade would heat up and bind, triggering the thermal protection on the grinder. I'd pause the timer and let it cool off to start again. Total cutting time was more like 8 minutes. That compares poorly to the Ezarc Metal Master disc which ...

Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox

Customer photo review of Carbide Oscillating Blade For Hardened Metal/Bolts,OIC34A

Jochystarz

This blades were recommended to me by the YouTuber project farm and he was not wrong, as you can see in the photos it allowed me to cut the the profile of a dryer duct vent into the concrete skirt of my manufactured home with no problem, it retained all its teeth despite the gold plating fading a bit. Best bang for the buck in imho.

Carbide Oscillating Blade For Hardened Metal/Bolts,OIC34A

Customer photo review of 15/24PCS Countersink Drill Bit Set with Storage Box

Steve C.

Brilliant product. These countersink drill bit set performs really well. They stay sharp and give a nice even countersink. Easy to setup and Ezarc even provides an Allen key to adjust the depth stop. I would thoroughly recommend this product.

15/24PCS Countersink Drill Bit Set with Storage Box

Mcripps

This blade was a good purchase. Some comments described it as cutting through 1/2 inch rebar in.like a hot knife through butter in.. I didn't see that but can get through one in about 90 seconds. It's for you to decide whether that's too long but I'm fine with it. As to longevity, I made 28 cuts through 1/2 inch rebar for a project and the only wear was to the paint. The abrasive surfaces are still completely intact. You can see what it looks like after these cuts in the picture. My ex...

Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox

EZARC Tools ReviewsVisit store