Triumph Bobber - Classic

Triumph Bobber - Classic Reviews

Roger M.

I took a chance buying the bobber black fly screen as it wasn’t listed as suitable for the tfc bobber with bigger diameter forks. By removing the rubber inserts it fits ok. I realize the rubber inserts improve the fit and are a cushioning part of the design : although I’ve only done about 60 miles since fitting so far so good. Best regards Roger

Joseph J.

Excellent cuts wind resistance by half. Fitted to my TFC had to replace the original rubber inserts with home made thinner ones which I already knew had to be done due to the top forks being a bigger diameter than the standard bobber but no problem works perfectly.

Joseph C.

The complete product and fitting kit is quality. Second to none with an added bonus of being extremely well designed to avoid interfering with any of the bike's standard fittings, as well as giving an appearance of being an attractive part of the bike. It can be easily fitted in 30 minutes and is effective against wind blast. Very happy.

Phil H.

Straight out of the box it fitted it fitted very ,all the parts were good quality and the design spot on. Fitting was simple ,took around 10 mins.

Nigel F.

only problem was that fit was tricky due to the clutch cable support bracket was in the way.. worked it out after a while but a note in the instructions to loosen it and perhaps raise it out of the way on the fork would have been very useful !! My third Dart screen.. Bonneville and Storm 1700.... all lovely thanks..

Andy W.

Having bought my Bobber Gold Line in the Spring it was a bit chilly, but I was determined to run it in a.s.a.p. and therefore braved the cold. Once I had a few hundred miles on the clock I could cruise at 70mph, and my chest was freezing. A bit of research led me to Dart, a pleasant telephone conversation with Darren and placement of an order. The screen arrived promptly, it was securely packaged and well presented. It is well made, using quality materials. Fitting is straight foreword. Initial...

Martin G.

The design of the Classic Flyscreen for the Triumph Bobber Black in Midnight Black ist great. The color matches perfect to the black style of the bike. Fixing the screen is a little bit tricky, because you have to manage, that the clutch cable is able to move while steering and there is not plenty of room between the fork and the headlight. I fixed the screen as high as possible due to wind-protection. Then there is nearly no wind on the cest (even at higher speed > 100 kph). The air is mainly c...

Michael G.

I looked for a windscreen for the Bobber not long after purchase but the aftermarket had not had time to start producing anything. Fast forward almost a year later and some searching turned up the Dart Flyscreen. I wasn't sure how effective it would and really didn't expect a lot but was pleasantly surprised, it reduces the wind buffeting and noise more than expected, the looks are superb and I am delighted with the purchase. Fit and finish are excellent and would recommend the Flyscreen to anyo...

Roger S.

Fast delivery from the UK to New Zealand. Great packaging with no breakages. The components are really well made and robust. There are clear concise instructions for fitting the flyscreen. It was easy to fit and simple to adjust. The screen takes the wind pressure off my chest at highway speeds. It complements the Bobber's single clock and enhances the overall look of the bike. I'm very happy with this fine product.

Patrick A.

Everything fit perfectly and the quality was honestly better than I had expected. Installed in minutes and I think it looks great with the high bars on the Bonneville Bobber. Exactly what I was looking for!

Mr A.

Looks pretty good, easy to fit and can be adjusted or removed just as easy. I've tried it once so far can't say i noticed a lot of difference with wind but it should protect my sat nav from the weather.

Manuel B.

This wind screen though small has improved the look and the ride. It does not take away all the wind resistance, but what it reduce in wind fatigue has made longer rides much less strenuous at highway speeds. I enjoy it very much.

Fakruradzi A.

Improved wind to body resistance by 40km/h more. I choose the classic screen as I thought it would be bigger. But it was smaller than I thought. However, would definitely buy if Dart comes out with a bigger one for my Bobber Black. By the way, customer service is tip top!

Barry H.

Package arrived in BC in only a few days. Was easy to install and fits prefect. I was skeptical of how well it would work, but it does a nice job of deflecting wind off the chest area. I rode 110km p/hr with and without, and there's a noticeable difference. The look is great to!

Herr P.

Installation needs not more than 15 minutes and is quite simple. At the moment it's too cold to check the wind protection ;-) I think it fit's to my bobber and it's not a break to the currend style.

Kim T.

Bobber wind effect from 80km over it is not good for long drive . After set up dart screen little wind coming over 100km but wind is very little stress . So now i really love to drive long distance drive . Thanks !!! Looking good , quality good , works good !

Robert M.

Ordere a screen for my new Bobber Black in Midnight Black. Apparently I wasn’t paying close enough attention and ordered for a regular Bobber...smaller forks. When I contacted Dart they quickly responded and sent me the right collets right away. Great customer service! I usually don’t do reviews but I feel Dart deserves a good one.

Kev C.

It is just fantastic and a can’t describe it any better. It looks unbelievably cool on the bobber.

Hansy J.

This is a great looking windscreen! I can’t speak yet of its utility as I have not tested it yet at speed. Too much snow on the ground!

Ahmad D.

Now I feel the bike has more volume from front end, earlier was almost naked and poor, much better look, but it doesn't make any difference in wind resistance.

Jamie N.

The Dart Wind Screen , is the perfect fit for my 2018 Bobber Black. It also adds to my bike rather then look out of place. i love it. Jamie

Stephen P.

Well engineered and simple but effective fit. Definitely reduces wind buffeting. More importantly adds to look of bike rather than change it. Would easily recommend.

金森雅.

見た目がクラシックでカッコよく、クオリティも高い。また期待以上に風防効果有り。位置にもよりますが首から下がしっかり守られます。

Robert K.

It came with the 41mm clamps and I need the 47mm clamps. I called and was told that they "were in the post", but as yet, I have not received them.

Andrew B.

Fitted this screen to my bobber tfc and it's perfect, finished the front of the bike beautifully.

Gary G.

Tip top kit. Makes mway riding more comfortable

Barry R.

Excellent piece of kit.does what it says on the tin 😄

Super Super

Jay P.

The fit is great and easy to install. Maybe adding a picture to the install instructions for suggested cable routing around the fork clamps would be helpful. Windshield was a bit shorter than I expected but I know it's a compact design so not an issue.

Barry W.

I made a chopper out of a Triumph bobber just changing the handle bars to Ape hangers. The bike preforms fantastically, But by changing the rider position the wind was just too much ride at 80MPH for any distance or faster. The fly Shield make a great effect on the wind off your body. So I don't have to wear a full face helmet It really takes away the fatigue you get from . being wind blasted. Great product and looks great on my scooter. I am a very Happy Camper. Thank You guys f...

Phil H.

I am more than pleased with the new dart flyscreen and the after sales service was second to non, whilst riding one of the bracket bolts worked loose (no fault of manufacturers) and a vital washer and bolt was lost, I sent an email to the company and within the hour had a reply from a lady called Annette saying there was a replacement in the post. Less than 24 hours later it was delivered and I'm back in the saddle. Thanks to all the staff at Dart for their help and kindness Phil Heywood

David J.

Screen packaging was excellent as were the fitting instructions. As for the product, it is well designed, built and simple to fit. A screen was badly needed for my Triumph Bobber at higher speeds and the Dart design works really well and looks great. Thanks guys!

Christopher C.

Cool little package. Installed effortlessly. Makes a great difference in the way the bike feels. Definitely cuts the wind. Seems more stable. Looks like it belongs. All in all totally pleased.

George G.

Great little screen easy to fit. Took the bike out for a test run and it made a big difference to the ride. Amazing what a small piece of plastic can do !!

Andrew S.

Looks are in keeping with the style of the bike and it takes away 50% of the wind from my chest. Possibly the most dangerous accessory I've fitted because I can now cruise faster 😊

Rick H.

I had to shave the pads that wrap around the forks. I believe the order was for the triumph bobber and not the bobber black. Fit fine after shaving down the pads.

Craig K.

Love the screen. Fits neatly and looks the part. Only had one problem with one of the 8mm countersunk screws that fix the anodised aluminium discs to the brackets. The thread on one of them was buggered. It wouldn't tap into the PlusMount clamp no matter how i tried. Must have been bad machining or such. So had to chase up a replacement which was a slight challenge and required cutting the new one down to the right length. Happy to send the faulty one back if your QC blokes want to check it out ...

Darren F.

This product was very easy to fit. Looks great and feels and looks to be of top quality. Very well packaged. 10 out of 10. Darren Ford Bobber Black Australia.

Kim P.

This is a great product! I was concerned about the size but once installed and tried it out on the highway, I’m very pleased! Made very well and easy to install. Looks super sharp. Would recommend to those interested. Thanks!

Triumph Bobber - Classic ReviewsMore details