This material was great to work with. Other PETG I've used needed what seemed like endless adjustments. I would definitely buy this again.

Works great. Printing with Bambu X1C and Bambu native PLA usually and this is almost an easy dropin replacement. Very little tuning and prints great. Good bed adhesion, good quality prints. This will be my go to first reach PLA going forward because I love the idea of using recycled PLA and minimizing impact.

Generally prints well. Printing on a Bambu Labs X1C with cool bed. The biggest issue is first layer adhesion. After thorough cleaning and then using the liquid glue from Bambu labs, I have been able to get more consistent adhesion. The filament itself is a bit more flexible than Bambu Lab native PLA that I normally print with. I think because of that, it causes some intermittent issues with AMS auto-retraction failing, which is easily solved with a manual intervention of releasing the teflon tub...

Each box uses half a kilo. Consistency of color is important.

Love this filament - easy to print nice look when done, even without post processing. Certainly going to become the standard go-to filament for our maker space ! Looking forward to more colours to become available !

I am enjoying this material after the learning curve of ensuring proper bed adhesion. This Wood PHA prints with a lovely wood-smell, however the smell does not linger in printer parts. This wood-fill also results in smooth parts unlike other types that result in a matte finish. Nozzle Temp: 195 [C] Bed Temp: 40 [C], first layer only (although I have been reading no heating may be beneficial?) Bed type: textured PEI build sheet. Bed adhesive: PVA glue with fresh and gene...

Needs a little extra flow rate/extrusion multiplier but once you get that dialed in it prints beautifully, looks great, and results in strong and dimensionally-accurate parts. I will probably be buying more of this.

Great PLA from a local Canadian business. The price is pretty fair, and the pla itself is easy to print. Only thing to note is that the colour of the 'terracotta' PLA skews closer to a salmon pink than an orange-red, but otherwise, fantastic stuff. I'm for sure going to be ordering from filaments.ca again, I quite like their selection and pricing.

Wet sanding with 320 grit gave me a very good finish. Looks like I need to use a smaller line width to get it to be clear. This is .4mm.

Good performance, the low price really helped.

Good quality, low price. Making hubs for my self-designed Ki-43 Hayabusa (aka Oscar) WWII warbird spanning 1100mm

Beautiful filament easy to print - only concern (for me) is the layer-to-layer adhesion which is not very strong - still paying around with the printing parameters. But still love it !!

i just love that navy blue

Best filament I’ve used so far! I have had great results using this one. Moreover, it is a very good thing that it has this level of quality using recycled material!

Exactly the yellow I was looking for. Love it !

This is great material. Printing 260 / 95 degrees on an h2 v2s direct drive all metal head on a biqu b1, enclosed and filament in a dryer during printing. 0.8mm nozzle. Cura: 1.0mm line width, 0.45mm layer height, 40mm/s. Adhesion layer is 0.30mm and 20mm/s on metal plate. Would like to run thinner layers but I get some warping so the head will crash and skip some teeth with a thinner layer. These are clamps to attach 30 industrial solar panels to a metal rack. Failed in pla from moisture effec...

I'm using a G10 bed. Trying to figure out why the first attempt of any print does not stick but the second attempt right after does. I am using a heated bed no glue temp set to 60 and slowed done the print speed to 60mm to print the miniture with supports using a 04 nozzle. I have also printed a low beam headlight removeal tool that saved me a headache and cost of a dealership trip. Just hope this is as biodegradable as claimed as this will be my go to choice for printing when possible.

I made a video for my students on how to use 3d printing with Revit software, using your products. If it is of any help to you, please feel free to check the link: https://www.youtube.com/watch?v=-7q3PjH2_7I&list=PLnQTukI1DJvy603TD2Uq2qG8esRdKlzNY&index=7 Thank you, Hoda [email protected]

Works great. used it to print a replacement part for my kids chair. Three months later its holding up great with no issues.