SsCustom Engineering Reviews - 637 Reviews | sscustoms.com.au

SsCustom Engineering Reviews

Name: SsCustom Engineering
Rating: 4.8

undefined review of Ultimate Purge Kit image 1 out of 1

Carl B.

Great product, kinda wanted just to get the sizes I wanted but now I have plugs for all sizes so guess it's better in the long run. Love the case/stand as well, fits the tool box perfect. First few uses went great, perfect purge. Thanks 😁

Ultimate Purge Kit

undefined review of Pipe Vice Kit 1 image 1 out of 1

Paul E.

Awesome kit, makes life a bit easier on the exhaust build time, Really good quality build Vice clamp makes welding so much easier too Only bad thing, no clamps for 2.25 inch,

Pipe Vice Kit 1

undefined review of Tacking Bands image 1 out of 1

Brendan D.

Wicked add on to your toolbox!! They work amazing, great for mock up and doing exactly what they are meant for , tacking. Very high quality materials and craftsmanship on all of these pieces would 100% reccomend these to anybody that does fabrication work. They make it a breeze. Something to be said about having the right tool for the job

Tacking Bands

Colton S.

These TACKING BANDS are amazing there like a 3rd 4th and 5th hand. You can cut and fit 3 or 4 pieces of exhaust before tacking them in place. The grip strength of these bands are amazing.

TACKING BANDS

undefined review of Tacking Band image 1 out of 1

Wes D.

Ss custom’s tacking bands made the exhaust fabrication of my street rod much easier. They secure the tubing so I can assure that they are in the correct location and the orientation is true and straight. I also appreciate the gummy bears that were delivered with my order!

Tacking Band

Christopher C.

The only thing I'm upset about is the fact I didn't buy more !! Shipping was surprisingly fast to get them in the USA. I will be the first to say I'm not the best at welding stainless steel but these made my life so much easier and in turn my welds better by providing a tighter fit while tacking. I'm a one man shop and these clamps are like having an extra hand. 100% would buy again and I Most likely will before my next project !

Tacking Band Set 1.5’’- 6’’

Abes S.

Highly recommend the sscustom team to any fabricator! quality products that you can’t put a fault to. This is my second product from them and will definitely not be the last!

Ultimate Purge Kit

undefined review of Pipe Vice image 1 out of 4

Brendan D.

Great tool to add to your fab shop or diy garage, I love how versatile it is, and it holds a lot!!!! You can see the entire Y pi pipe in there no problem. Super sturdy unit , would definitely recommend

Pipe Vice

undefined review of SsCustom Weld Cleaning Machine image 1 out of 1

Maurice S.

Wow, Super impressed. I have used machines costing 3 times as much and have felt that some where lacking in power. This is a very capable machine and seems to have very high build quality with nice leads and hand piece and comes equipped with 5 brushes as well. best of all Dont have to use death paste any more. Well done guys

SsCustom Weld Cleaning Machine

undefined review of Tacking Band image 1 out of 2

Darren I.

Worked awesome will definitely buy more when i have more exhaust n headers with different diameter pipes 🤙🏼🤙🏼🤙🏼

Tacking Band

Steven C.

Worked very well prep was so much easier and held my joins rather than squashing them. Id buy another set or even the slim ones for bends

Tacking Band Exhaust Kit

undefined review of X Pipe Marking Multi Blocks image 1 out of 1

Michael G.

This is my first exhaust and first x-pipe. This block makes it super easy and helps marking angles easy.

X Pipe Marking Multi Blocks

undefined review of EXHAUST PIPE VICE KIT 4 image 1 out of 1

Martin N.

Great quality, good welds, this will be a great benefit for the revamp of my 87 Grand National, 3.5" DP and Vee Banded 3" exhaust

EXHAUST PIPE VICE KIT 4

undefined review of Pipe Vice image 1 out of 1

Trent K.

It is an invaluable tool that saves so much time. Easy to tighten and loosen, rock solid. Honestly, I can't imagine my life without it at this point.

Pipe Vice

Michael G.

Makes life so much better than the other guys clamps. No need to mess around with bolts and nuts. Definitely worth the investment. Going to order more.

Tacking Band

undefined review of Ultimate Tig Kit image 1 out of 1

Colton S.

Great product. I don’t TIG weld that much. This cup really shields the weld well with gas. Helps a beginner like me.

Ultimate Tig Kit

Michael W.

Excellent product 👌 shipping was unbelievable came to Vic in like a day will and have brought from these guys again

Ultimate Tig Kit 1

Ryan A.

These are that extra set of hands that you always wish you had! I wish I would’ve found these sooner.

TACKING BANDS

David B.

it works great to make my exhaust kit work. i wanted no clamps and this tool helped me get the pipe straight and tacked every time. thanks for the great product!

Tacking Band

John B.

Awesome product. I watched the video on Facebook explaining why my welds weren't shiny. Buying the tig kit has made a huge difference and I now get nice shinny tig welded stainless.

Ultimate Tig Kit

Rod D.

Such an awesome product. I bought a few different sizes, which have enables me to start building a custom stainless system for my 4wd. Exhaust building has always been a love/hate relationship, mainly because of the fiddly mock up procedures. The tacking bands take out all the hassle, especially as you can align the pipes to where they need to be without actually having to tack them to sit in place first. A Win Win as far as I'm concerned!

Tacking Band

Gilmore D.

other than time frame in shipping you have some great tools to build clean exhaust would really like to have a hard copy catalog with all your products thank you

Tacking Band

Adam T.

Great little product! Plenty of grip! Only this is, I wish that the clamp was easier to clamp over the round ends and sometimes doesn't slip through the hole Having the clamp does make it a little harder when making motorcycle exhausts due to how close together the pipes are ... perhaps a thread rod with a welded nut in the middle of it between the 2 solid pieces ... tightens and loosens with just a spanner and saves room ... just through .... solid product though guys!

TACKING BANDS

Scott C.

Exactly what I needed as I only have one set of hands! When keeping an exhaust tucked up tight under the car, it helps being able to rotate the bends in the clamp to get it just right!

Tacking Band

Jason G.

Great stuff! SS customs makes great fab tools. I built my first stainless exhaust with his tacking bands and I will legitimately say, they are a 100% life saver! Hopefully more people her in the US find him. Make your life easier and get you some!

Slim Tacking Band

Amanda H.

These are high quality tacking bands. They will definitely get their usage on the exhaust update planned for the Chevelle. They shipped quickly and spent more time in US customs than it did to make it from Australia to LA. Will consider more products from you in the future.

Tacking Band

David H.

Although I haven’t had a chance to put the Tack Bands that came in the Pipe Vice Kit it is all excellent quality. I did however test the band clamps on some 3” stainless tubing I have in the shop for exhaust work. I literally can’t wait to use the entire kit. Buy it. You won’t be disappointed!!

Tacking Band

Kelly B.

I haven’t had a chance to use the 3” clamps yet but they are great quality and are going to make putting the stainless headers and exhaust on my 2018 Camaro SS I live in Kansas and the shipping was fast thanks for a seamless shopping experience

Tacking Band

Jason H.

These bands are awesome! I wish I knew about them sooner is my only complaint! These save me so much time for tacking pieces in place or on the bench. Everything stays straight and even, I will definitely be buying more sizes as I only bought the 3” because that’s mostly what deal with. Great product!

Tacking Band

Jimmie W.

Haven't had time to use the yet. Everything looks good. I did mine a few years ago by just mitering 90° and 45° s/s fittings I got from Summit. This would make it way easier.

X Pipe Marking Multi Blocks

Andrew S.

I’ve been eyeing the exhaust clamp kit for several months, and finally just pulled the trigger These things are so popular they sold out the first two times I tried to order them but it was definitely worth the wait I immediately put them to use and it’s worth every dollar the welding the material quality the fit and finish there’s no flaws in them so don’t worry about cutting your finger or anything on the edges. It’s all in the small details

Shipping Protection

undefined review of SLIM TACKING BAND KIT image 1 out of 1

Steven F.

I got the thin set, with multiple sizes. I’m not even using the right vice grips and they work great. I’ll be buying the regular size next.

SLIM TACKING BAND KIT

Bill L.

This is a perfect tool. I was trying to clamp my exhaust and hold my exhaust and turn it around. This band does it all for you. Holds it together perfect, so you can tack it. And even turn it over. Works Excellent for me. Thanks.

Tacking Band

undefined review of Purge Bungs image 1 out of 1

Colton S.

These Purge Bungs really streamline setup. Super easy to use. Glad I got them, made really well I’ll have them for a long time for all the projects.

Purge Bungs

Scott C.

Exactly what I needed as I only have one set of hands! When keeping an exhaust tucked up tight under the car, it helps being able to rotate the bends in the clamp to get it just right!

Tacking Band

Dougie Boy M.

If a pair of these stout as absolute stout collectors, truly do retail for $1800 then I’ll be bloody dipped. You won’t find better quality CNC machined collectors. These legends make great products that no CCP🇨🇳 loving pathetic suckhole could ever dream of matching in production quality, let alone bloody exceeding. $1800 or not, if you need these collectors then bloody well just buy them! Only morons purchase sub par products from a sub par filth country (CCP💩) that are made by individual...

Billet Merge Collectors

Nigel R.

Have only had my pipe vice for a week, and I am very impressed with its versatility, the only down side is they weren’t around 40 years ago when I started, love it!

Pipe Vice

Joey C.

This is one nice piece of hardware! Very well thought out!! Stacy was extremely helpful and gave me some ideas as what he recommended I purchase. Everything came super fast, boxed very well and fast as all hell!! i am very impressed with this business and I highly recommend. And no....I am not related!

Pipe Vice

Alex T.

Pipe vice is sturdy and quality built and the tacking bands are super handy, overall great quality and reasonable priced products, perfect for tradies that cbf making their own tools like me lol

Pipe Vice Combo

David M.

Thankyou guys , this brilliant In every sense of the word , in how easily it holds your work as you go through building intercooling and exhaust work allowing you to precisely weld each component. Thankyou again . Will be definitely purchasing more of your tack clamps , in 3" and 4"..

Pipe Vice Combo

SsCustom Engineering ReviewsMore details